Get the Best IPTV Service
Android IPTV STB Emulator | Page 8 | IPTVTalk / Kodi / Android / Dreamlink / BuzzTV / MAG254 / Formuler

Android IPTV STB Emulator

#142
Stopping Auto Play

Here's a tip to stop the emulator from 'Auto Playing' a channel when scrolling through the list. The key is to first set the emulator's Mediaplayer to use the Internal Player, then set the Profile>Stalker Settings to 'Play in preview only by OK' (Check the box). You then exit the emulator and restart it, then select a channel. If you get the little triangle next to the channel number, then you have stopped the auto play. You can then change the mediaplayer to external if you can't get the internal player to work consistently. When you first start the emulator, it will automatically play what ever the first channel is set, but after that, you should be able to escape back to the channel listing, and scroll through the list without having the emulator play a channel when you slow or stop.
 
#147
Is there a way of downloading this file to ouya without having to root my device? I tried several different ways I even downloaded to my phone extracted it and tried sending it Bluetooth..
 
#150
C/P Thanks to mvas

Latest version 0.5.28 pre release requires more testing before I release it to google play

Arm
Code: 
https://mega.co.nz/#!ENAU0SBb!pqkZUMiic0ysoTiPP9jqGln0-YCy9v7H4nc9g0VjCzM

X86
Code: 
https://mega.co.nz/#!9IRARZgQ!gCO25KUukm_m5gX_IJHsI_ElPG9fPjffNNPxBcP59co


What's new:
* Stalker settings now working (not all of them).
* Loading bar now doesn't appear over a video in fullscreen mode.
 
#151
Be very careful with the pre-release .28. It works, and the "stalker settings" does work, but the portal settngs are not visible... its all combined in the non-visible 3-dot settings. I had to unistall .28 to get this version to install (backed it up of course), then figured out how to get it out of the Cyrillic alphabet. Lost the 'autoplay' disable, made it work after re-enabling the external player, as the internal player does not work at all in this pre-release (video not visible, only audio for about a second).

Edit: internal player doesn't work on my Andy Emu/STB Emu setup... just clarifying. I just rolled back to .27, it didn't work there, either, but I know it does on my android box.
 
Last edited:
#152
dara said:
Be very careful with the pre-release .28. It works, and the "stalker settings" does work, but the portal settngs are not visible... its all combined in the non-visible 3-dot settings. I had to unistall .28 to get this version to install (backed it up of course), then figured out how to get it out of the Cyrillic alphabet. Lost the 'autoplay' disable, made it work after re-enabling the external player, as the internal player does not work at all in this pre-release (video not visible, only audio for about a second).
Click to expand...

Thxs dara I think I will wait...
 
#156
jony uninstall the mx player and reinstall it, now immediately after you install it open it and right the version number of the APK mx player you get asked the first time you open the mx player and install it either from the play store or the aptoide, after that go again to mx player setting and then decoder and enable or check H/W+ now all should be good for you.
 
#157
Thanks Date i unchecked some boxes in the decoder menu and i am getting most ch
i will play a bit more later taking the wife for happy hour is there a way to change the channel up or down
with out having to stop and go to list and play like clik clik to the next ch
 
#158
To be honest with you all I do is I check the few first options in mx player H/W+ and all works good here, also the APK version needed to be installed.
Great selection of channels with the iptv and wonderful project.
 
You must log in or register to reply here.
Similar threads Most view View more
Top Bottom
Menu
Flash Sale Popup