Setting up PVR Stalker (Kodi Built-in)

[Puska]

I also left "Europe/Kiev" but did set time zone to Toronto/Canada in OpenELEC and my EPG is spot on.

 

[cassi]

This is what i did:

Go to Papiao, delete your MAC and save. Get in again and set a new MAC, save. Go to Kodi, Settings, TV, disable it. Go to Addons, Stalker Client, disable it. Go to configure and add the new MAC you just set up on Papiao. Make sure it is the same: 00:1A:78:XX:XX:XX where X are ramdom numbers/letters combinations, then scroll down to Advanced. Token: put any 4 numbers; Serial: put 12 numbers and on last digit put a letter (Ex. H, J, A, F, whatever), this is ramdom 13 digits serial anyway; Device 1: put any 4 numbers; Device 2: put another 4 any numbers, different than Dev1; Signature: put your lastname. Click ok, enable the addon again, go to settings, TV, enable it again, it will start charging and maybe will work. If you get the error (most likely), click home, and exit Kodi. Re enter kodi again. Now it should work. Good luck

thanks you works perfect

 

[Autoroam]

I followed Vampirito's instructions and they got the channels to load (got an error first time i enabled tv then I exited Kodi and when I reopened Kodi, it all displayed)

However, in my initial test of channels, a few played but then I got a message "Stalker failed to fetch stream from url" ….wonder what this is all about?

I quit kodi and then the problem went away when I restarted….will need to monitor this.

Is there any way I can avoid the bar at the top loading the guides and channels every time I start up Kodi (or is that impossible)? Thanks

 

[anilkuj]

I Tried all the instructions to the word no luck , i took the same serial , Device Ids and Signature and used in in IPTV Stalker video addon everything works fine

just can't seem to get it working with the PVS stalker client both with 0.8.4 and 0.8.4 also tried 0.9.7 froom Github same issue

i am at my wits end , any help appreciated

 

[fernando6974]

hi guys , does all of this applies as well to fire stick , because i was able to set up everything on my pc but for some reason i cant set up pvr on fire stick, first of all i always make sure that kodi on pc is turned off before i even start fire stick , i am running kodi 15.2 on both, using ninja epg, any answers will be great, thanks

 

[Sleepy_Eyez]

This is what i did:

Go to Papiao, delete your MAC and save. Get in again and set a new MAC, save. Go to Kodi, Settings, TV, disable it. Go to Addons, Stalker Client, disable it. Go to configure and add the new MAC you just set up on Papiao. Make sure it is the same: 00:1A:78:XX:XX:XX where X are ramdom numbers/letters combinations, then scroll down to Advanced. Token: put any 4 numbers; Serial: put 12 numbers and on last digit put a letter (Ex. H, J, A, F, whatever), this is ramdom 13 digits serial anyway; Device 1: put any 4 numbers; Device 2: put another 4 any numbers, different than Dev1; Signature: put your lastname. Click ok, enable the addon again, go to settings, TV, enable it again, it will start charging and maybe will work. If you get the error (most likely), click home, and exit Kodi. Re enter kodi again. Now it should work. Good luck

Thank you... it works like a charm

 

[Autoroam]

Left "Europe/Kiev" untouched in stalker pvr config and the guide is unaffected.

 

[scotracer]

After following the instructions to the letter it still didn't work for me however, changing from portal to the 11. Address worked perfectly

 

[Puska]

Anyone know how to solve the problem, just got nexus player, installed Kodi 15.2 and setup Stalker PVR 0.8.4 so I got channels to load with epg but than most of them say Failed to load stream URL when trying to play them.

Tried lowering EPG to 1 day, Nexus player has 1 GB of Ram same as Raspberry PI 2

 

[Puska]

Ok seems that distance from router made signal from 5 Ghz sketchy, when I moved it next to router everything seems to work fine, except CBS but not sure if the channel is down or it's just my setup.

 

[pedrer]

Hi Dara, iam again, i follow your last instruction, now i used the pvr stalkert that come in Kodi 15.2.... i configured the mac, and set 11.iptvserverxxxxx but the client pvr say unable to load channel ... please help

thanks

pedrer

 

[big dady]

Try doing what Alucard did here http://iptvtalk.net/showthread.php?...or-how-to-fix-it&p=77549&viewfull=1#post77549

 

[B787]

I am new to the site, I been reading the newbie section for setting up the iptvtalk, I have a matricom gbox with kodi running The Beast and I made the donation and got my info, when I go to search for my donation and after finding it I click on "change iptv mac address" and input my gobox mac address but it fails to update and this is where I am stuck at, can anyone help please

 

[dotsadie]

You put the following in 00:1A:78: an the last 6 numbers or letters of your Mac address after (78) with the :

 

[duhhud]

puska....exit kodi clear your kodi cache restart kodi should work fine then............
...
...
also when anybody uses ivue guide or any other guide with the stalker ADDON then goes to try to use the PVR stalker live tv function.most times you will need to exit kodi clear cache then restart kodi for PVR stalker to work.

 

[eagleboyjr]

Other than the MAC address, do the rest of the settings need to match IPTV Stalker?

 

[larrym4009]

Hello, I just purchased and received my approved MAC address and followed the clear instructions but am still having problems.... I have KODI 15.2 loaded on my Amazon Fire TV box, will this work I do I need to purchase a separate box?
Thanks,
Larry

 

[ilan]

There shouldn't be a problem if the PVR or add-on is configured properly. Specifically, what issues are you encountering?

 

[viper8690]

I'm having a problem on my android box s802 where if I put the guide preference to "xmltv only" then it comes up blank. If I put any other option, the guide shows up; I assume that it is only pulling data from the "provider" whatever that is. However, I have a few issues with this:
1. it's very slow to load
2. It does not support colored guide like xmltv epg grabber
3. DST is always off so the guide is off by 1 hour

I have successfully set up everything on my macbook with "XMLTV Only" and it works perfectly fine. It's just an issue on my android box. Anyone else run into this same issue?

 

[viper8690]

I'm having a problem on my android box s802 where if I put the guide preference to "xmltv only" then it comes up blank. If I put any other option, the guide shows up; I assume that it is only pulling data from the "provider" whatever that is. However, I have a few issues with this:
1. it's very slow to load
2. It does not support colored guide like xmltv epg grabber
3. DST is always off so the guide is off by 1 hour

I have successfully set up everything on my macbook with "XMLTV Only" and it works perfectly fine. It's just an issue on my android box. Anyone else run into this same issue?

I tried downloading the guide.xml from the android browser and then just referred the PVR stalker client to the location of the guide and everything worked as it should. Kind of a headache to do on a regular basis. It seems the client is being blocked from accessing/downloading the guide.xml but I'm not getting any error messages.

Can anybody suggest anything?