Get the Best IPTV Service
Setting up PVR Stalker (Kodi Built-in) | Page 2 | IPTVTalk / Kodi / Android / Dreamlink / BuzzTV / MAG254 / Formuler

Setting up PVR Stalker (Kodi Built-in)

#21
starting with Kodi 16 Jarvis alpha2, full urls (including the trailing '/') must be used.

Code: 
NFPS - http://portal.iptvprivateserver.tv/stalker_portal/c/
Rocket -  http://portal.iptvrocket.tv/stalker_portal/c/
IPTV66  - http://mw1.iptv66.tv/stalker_portal/c/
 
#23
So I'm getting closer. I'm now running Kodi Jarvis 16 rc2. PVR client 0.9.7.
I'm still getting an error when I try to download. log portion attached. Anyone know what error 794 is supposed to mean?
21:20:47 290.677856 T:1475068928 ERROR: AddOnLog: Stalker Client: GetChannelGroupMembers: channel not found
21:20:47 290.677979 T:1475068928 ERROR: PVR - GetChannelGroupMembers - addon 'Stalker Middleware:http://cod123.biz:88/stalker_portal/c/' returned an error: server error
21:20:47 290.678070 T:1475068928 ERROR: PVR - GetChannelGroupMembers - cannot get group members from client '794': server error
21:20:47 290.710144 T:1475068928 ERROR: AddOnLog: Stalker Client: GetChannelGroupMembers: channel not found
21:20:47 290.710419 T:1475068928 ERROR: PVR - GetChannelGroupMembers - addon 'Stalker Middleware:http://cod123.biz:88/stalker_portal/c/' returned an error: server error
21:20:47 290.710510 T:1475068928 ERROR: PVR - GetChannelGroupMembers - cannot get group members from client '794': server error
lvpi2:~/.kodi/temp #
 
#26
Since the new requirement of a serial number with NFPS; is it possible to get the built-in version working with it?

I can't use the modified version (Stalker Client NFPS) because I'm using Android Lollipop which prevents the required .dll/.so from loading.
 
#27
The stalker does have serial number entry and I have tried to Add a 13 digit (even 15 digit) random serial number, but Stalker says "Unable to load channels", Are the device ID 1&2, signature, token, required? I have tried entering random numbers in that also and still says "Unable to Load channels"


Anyone has gotten Stalker client to work after the serial number requirements ? please help
 
#28
apun said:
The stalker does have serial number entry and I have tried to Add a 13 digit (even 15 digit) random serial number, but Stalker says "Unable to load channels", Are the device ID 1&2, signature, token, required? I have tried entering random numbers in that also and still says "Unable to Load channels"


Anyone has gotten Stalker client to work after the serial number requirements ? please help
Click to expand...


I've tried numerous of times but failed the only thing working at he moment is ivue guide wth iptv stalker addon
 
#30
Last edited:
#31
This is what i did:

Go to Papiao, delete your MAC and save. Get in again and set a new MAC, save. Go to Kodi, Settings, TV, disable it. Go to Addons, Stalker Client, disable it. Go to configure and add the new MAC you just set up on Papiao. Make sure it is the same: 00:1A:78:XX:XX:XX where X are ramdom numbers/letters combinations, then scroll down to Advanced. Token: put any 4 numbers; Serial: put 12 numbers and on last digit put a letter (Ex. H, J, A, F, whatever), this is ramdom 13 digits serial anyway; Device 1: put any 4 numbers; Device 2: put another 4 any numbers, different than Dev1; Signature: put your lastname. Click ok, enable the addon again, go to settings, TV, enable it again, it will start charging and maybe will work. If you get the error (most likely), click home, and exit Kodi. Re enter kodi again. Now it should work. Good luck
 
#32
vampirito said:
This is what i did:

Go to Papiao, delete your MAC and save. Get in again and set a new MAC, save. Go to Kodi, Settings, TV, disable it. Go to Addons, Stalker Client, disable it. Go to configure and add the new MAC you just set up on Papiao. Make sure it is the same: 00:1A:78:XX:XX:XX where X are ramdom numbers/letters combinations, then scroll down to Advanced. Token: put any 4 numbers; Serial: put 12 numbers and on last digit put a letter (Ex. H, J, A, F, whatever), this is ramdom 13 digits serial anyway; Device 1: put any 4 numbers; Device 2: put another 4 any numbers, different than Dev1; Signature: put your lastname. Click ok, enable the addon again, go to settings, TV, enable it again, it will start charging and maybe will work. If you get the error (most likely), click home, and exit Kodi. Re enter kodi again. Now it should work. Good luck
Click to expand...

Same settings are listed in the following link as well, may be easier for some to follow:

I got the Pvr Stalker Client 0.8.3 to work properly using the following steps mentioned by another user in the following post:

Code: 
http://iptvtalk.net/showthread.php?9504-For-all-those-running-Kodi-and-Stalker-Client&p=75613&viewfull=1#post75613

Just remember after saving all of the information: Make sure you Enable/Disable TV more than 2 times, first time it will say "unable to load channels" but second and third time it will finally load all channels. :D
 
#33
-*Must use Both numbers & letters for Advanced Settings*-

Changed my MAC Address with Private Server

Disabled TV & PVR Client

L33T3D my Settings with Both Numbers & Letters, and updated MAC

Enabled PVR Client

Enabled TV- still get same channel load error

Disable/Enable once more and now All Working!!! :D
 
#36
I actually uninstalled stalker pvr installed it again entered same Mac and serial..... As in stalker iptv addon but left out epg and miraculously it worked. Can't beleive how much faster it changes channels. And best off all I have EPG not sure if it's because IVue or how it got info but it's working.
 
#37
Hey dara, you should update this tutorial to indicate that the Time Zone does matter! Was struggling with my guide missing channels for 2 days until Alucard told me to set my Time Zone, now my guide works perfectly :)
 
#38
I don't think the time zone matters, at least in 0.8.3. I have no issues with leaving it alone. The real setting that is important is your computer/device setting for time zone.

Caveat... I could be wrong, but dvbken would probably have told us otherwise, either through the site, or to the Clarivoyance team.
 
#39
dara said:
I don't think the time zone matters, at least in 0.8.3. I have no issues with leaving it alone. The real setting that is important is your computer/device setting for time zone.

Caveat... I could be wrong, but dvbken would probably have told us otherwise, either through the site, or to the Clarivoyance team.
Click to expand...

Well, from my experience (trying for 2 days straight to fix my guide), the time zone 100% does matter. When it was on Europe/Kiev, 237 channels were missing from my guide (all the channels with "no info available"), and the guide was not coloured. After trying EVERYTHING (and thinking time zone didn't matter because I followed this tutorial), today I set the Time Zone to America/Toronto (I live in Montreal), and now my guide is exactly as it was with the NFPS PVR (i.e. all channels showing, coloured guide to distinguish genres...)
 
#40
It may mean that there might have been an inadvertent character entered there that caused the guide parser to choke, and repopulating it allowed it to work. The last word from the developer is that it doesn't matter, that timezone is determined from the device settings, iirc (I'll check his postings). I'm running with the default setting "Europe/Kiev" and it works fine.
 
You must log in or register to reply here.
Similar threads Most view View more
Top Bottom
Menu
Flash Sale Popup