Dreamlink T6 IPTV

[wallsofsound]

Has anyone been able to use A privy server with IPTV on A Dreamlink t6 If so can you direct me to the setup instructions.
Thank you.

 

[Marley]

yes you can ...........rock -nfps-66

 

[wallsofsound]

I already have rocket and 66 with iks and iptv looking for set up instructions kinda lost. Using a t6 and vixo2 got both working but can only do IKS on my t6.

 

[Marley]

yup tv online for vixo2 and use kodi for iptv on t6 or avov2

 

[legs1973]

i'm on the same boat with my t6

 

[Marley]

this is c/p
To get your server on it do this,

Go to System. Under System scroll under that to Satellite.
Click ok on remote.
Now go to Networking click ok on remote.
Scroll to the right for server 1 click ok on remote.
A page will come up.
That's where you place your ps info's.
Use ok button to get into all,
Leave Protocol as Newcamd
Lable name. i use the rocket url for it. Like if your on 2.rocketserver.tv thats what i myself put in there.
Server Ip is next. which if your on 2.rocketserver.tv thats what you put in there unless you are using the ip for 2.rocketserver.tv
Ports thats where you put your port so again if your using 2.rocketserver.tv you place in 35922
Connect on Init leave that as disabled.
Key well that's the des key which is 6103403445406970987123412134
Then username and password. Both those places you put your donation code.
When done click the start button.
Pretty easy stuff really.

this is for iks

 

[wallsofsound]

In KODI; Load up your Stalker IPTV Addon and configure one on your own using the format provided above, and link it with your Donation.
Go to System -> Settings -> Add-ons - > Enabled Add-ons -> PVR Clients / Video Add-ons -> Configure - > Custom MAC (ON) - > Set one with the format I told above. The screen should look like this.
So when I do the following steps the only one I see is Tvheadend
I have also tried putting stalker in with a usb drive with no success. Any help or direction I would be Thankful

 

[Marley]

that was for iks not iptv on post 6

 

[Marley]

look in kodi section here have lots info but the dreamlink is 14.2 look for right setup for that
This plugin is For Kodi 15.x only, Simply install any version of Kodi 15, then install this OFFICIAL version of pvr.stalker for NFPS.
so make sure you get right one

 

[wallsofsound]

<urlopen error [Errno7] no address associated with???

 

[Marley]

you ever get it too work on iptv

 

[wallsofsound]

No still having stalker issues I had these addresses for fusion, muckyduck ,super repo, and one other one but lost them after a reboot. help to addresses would be kind.

 

[Capt.Kangaroo]

No still having stalker issues I had these addresses for fusion, muckyduck ,super repo, and one other one but lost them after a reboot. help to addresses would be kind.

Thinking a new file is gonna be needed before iptv gets anywhere on the T6
343 bin seems to have issues with iptv

 

[glen1971]

I need to change my MAC address to get IPTV working.. Any idea how to change it? I can see it (System, System Info, Network) but that's about it...

 

[wallsofsound]

I did it I got IPTV on my T6 working but it is still freezing a lot sometimes it works ok Im on stalker 9.0.21 with rocket on portal one

 

[wallsofsound]

glen1971 I think you need stalker 9.o.21 or 1.0.8 ?? Then check custom mac address i do have it working on portal 1 with stalker 9.o.21 you also need to a mac addy and signature and 2 device ids and a serial #

 

[Marley]

do you really have this working no bs you say one thing then another dont know what to make of you

 

[wallsofsound]

Yes I really do have IPTV stalker 9.0.21. (build 343) working in portal 1 on my DL T6 it is not as good as Vixo 2 with tv online, but yes I do have IPTV and IKS on my dreamlink T6 I just have to enable live TV when I want IKS need to there are issues with IPTV sometimes trying to change a channel the same channel restarts before you can get to the new channel.

 

[sicario]

hi.can you post info on how did you got it working

 

[Bkman2020]

He must be using kodi.