channels here are working. But... there is a but
But when I change the channel then I loose all channels and get a Channel Stream Error message. I switch back to original channel that did work, and it still works.
So then i change channel again, to any channel. It will not work, but I leave it on that non-working channel and then I shut the device off just with the remote. Then sometime later I turn on and that channel I had left it on that didn't work, now works, but when i change the channel no others works and that same error message.
Okay so that was testing with a Buzz device.
So then I connect an old Dreamlink T1 Plus device and with that same papiao code(exact same code), all channels work. I can change the channels all I want and all work, no issues.
So this is why I say it must be some sort of networking issue, as the channels are working.
I believe the Buzz device has some sort of other issue with networking with papioa server which if so may be server networking alone as well., but I don't know. The way it is acting, it could be networking issues as mentioned
Those with Buzz devices, please check this.
Turn to a channel, any channel and then turn the device off. Wait about an hour and turn on without changing channels, and see what happens.
Then if channel works, change the channel and see what happens.
Those with other older devices, like my old T1 device, blow the dust off them and try it for results.
I did contact papiao administration about this , twice now. But no resolution has been mentioned other then to reboot equipment.
But i'll be here all night and so i will be again in contact with papiao admin.
I am thinking it is an issue that starts at the server level but something to do with networking from there, which turns into an ISP thing... I just can't say though, I am not that tech smart about all this.
oh and Big Mac is not testing with papiao, he is just here to help with some sound advice.
I Don't See That Option