Authentication issue with PVR Stalker NFPS

[Johnnymo9210]

Uninstall the stalker client

Stalker PVR Setup Instructions
1. Go to this link and generate a new MAC. hxxp://www.hellion.org.uk/cgi-bin/randmac.pl?scope=global&oui=00%3A1A%3A78&type=mult icast. Replace xx with tt.
2. Associate the new MAC with your donation. If it fails, repeat 1 and 2 until it accepts the MAC.
3. Go to Settings, Addons, PVR and select the Stalker Client.
4. Select Configure.
5. Select Portal 1
6. Enter the MAC address that you generated and linked in steps 1 & 2
7. Enter the Server Address. It can be hxxp: //portal.iptvprivateserver.tv/stalker_portal/c/ or 11.iptvprivateserver.tv Replace xx with tt.
8. Set the Time Zone your in. You can use this site to get the correct Time Zone Name: hxxps://en.wikipedia.org/wiki/List_of_tz_database_time_zones Replace xx with tt.
9. Use your donation number for both Login and password.
10. Set Guide Preference to Prefer Provider
11. Set XMLTV Scope to Remote URL.
12. Set XMLTV Remote URL to hxxp://is.gd/NFPSF Replace xx with tt.
13. Click OK to change it.
14. Go to C:\Users\<LOGIN>\AppData\Roaming\Kodi\userdata\add on_data\pvr.stalker on Windows or
/sdcard/Android/data/org.xbmc.kodi/files/.kodi/userdata/addon_data/pvr.stalker on Android and open the settings.xml
15. Insure the connection_timeout value is at 60 and then save the changes.
16. Go back to Kodi and assuming you still have the Stalker Client Plugin up and enable the Stalker PVR Client. If not see step 3 to get back to it.
17. Back out to your Kodi Settings Menu and select TV/Live TV and enable the Live TV.

This should start the PVR Stalker client. Give it a few minutes to load the guide information. Once loaded you should have a TV option on your main menu (Skin Dependent).
Select it to watch TV. You should also have a sub menu under that for the EPG.

is this for the PVR stalker NFPS or Stalker cilent that is pre loaded onto kodi 15.0? thanks

 

[Johnnymo9210]

Uninstall the stalker client

Stalker PVR Setup Instructions
1. Go to this link and generate a new MAC. hxxp://www.hellion.org.uk/cgi-bin/randmac.pl?scope=global&oui=00%3A1A%3A78&type=mult icast. Replace xx with tt.
2. Associate the new MAC with your donation. If it fails, repeat 1 and 2 until it accepts the MAC.
3. Go to Settings, Addons, PVR and select the Stalker Client.
4. Select Configure.
5. Select Portal 1
6. Enter the MAC address that you generated and linked in steps 1 & 2
7. Enter the Server Address. It can be hxxp: //portal.iptvprivateserver.tv/stalker_portal/c/ or 11.iptvprivateserver.tv Replace xx with tt.
8. Set the Time Zone your in. You can use this site to get the correct Time Zone Name: hxxps://en.wikipedia.org/wiki/List_of_tz_database_time_zones Replace xx with tt.
9. Use your donation number for both Login and password.
10. Set Guide Preference to Prefer Provider
11. Set XMLTV Scope to Remote URL.
12. Set XMLTV Remote URL to hxxp://is.gd/NFPSF Replace xx with tt.
13. Click OK to change it.
14. Go to C:\Users\<LOGIN>\AppData\Roaming\Kodi\userdata\add on_data\pvr.stalker on Windows or
/sdcard/Android/data/org.xbmc.kodi/files/.kodi/userdata/addon_data/pvr.stalker on Android and open the settings.xml
15. Insure the connection_timeout value is at 60 and then save the changes.
16. Go back to Kodi and assuming you still have the Stalker Client Plugin up and enable the Stalker PVR Client. If not see step 3 to get back to it.
17. Back out to your Kodi Settings Menu and select TV/Live TV and enable the Live TV.

This should start the PVR Stalker client. Give it a few minutes to load the guide information. Once loaded you should have a TV option on your main menu (Skin Dependent).
Select it to watch TV. You should also have a sub menu under that for the EPG.

ok so on the pvr stalker NFPS thats where i am getting the authenticion failed..... device conflict_id missmatch, i unistalled the pvr stalker NFPS and loaded on the stalker client the one you can change the timeout to 60, followed all the steps thats you said an now getting the Unable to load channels message. i just cant fiugre out how to get around this.

 

[Johnnymo9210]

if at anytime you set 'device_id' or 'device_id2' in IPTV stalker, then the mac address that you used is also tied to those device_ids.

if you're using a mag stb you currently can't use "Stalker Client NFPS", because the mac address is always prefixed to 00:1A:78. while the mag uses 00:1A:79.

you have three options to fix the device_id conflict:
1) change the mac address
2) get the device_ids from the IPTV stalker settings and configure "Stalker Client"'s settings to use the save device_ids
3) ask your provider to clear any device_ids associated with your mac address

i am using the amazon fire TV, my MAC address is 00:1A:78

i have changed the MAC address numerous amount of times
IPTV stalker and the stalker client have the same MAC address that is linked to my donation

 

[Alucard]

It is the PVR Stalker that comes with Kodi.

The issue is that one of the clients is sending additional info to the back end server that locks out the others. If you install the Stalker Client from the repo, the Send Serial Number is enabled by default and that needs to be disabled bore you do anything else. If you use iVue then this will lockout your all your clients unless you do a hack for it not to send the SR.

Once the the back-end server is locked to one of the clients, then the only way to fix this is to change the MAC. Just to see if you can get it working.

I would suggest disabling/uninstalling iVue and Stalker Client add-on, then go to the your Kodi\userdata\add on_data and delete the pvr.stalker and plugin.video.stalker folders to insure you get fresh configs.

Once that is done work with the PVR Stalker only following the instructions I posted. iVue and Stalker Client is not needed for this.

 

[Johnnymo9210]

It is the PVR Stalker that comes with Kodi.

The issue is that one of the clients is sending additional info to the back end server that locks out the others. If you install the Stalker Client from the repo, the Send Serial Number is enabled by default and that needs to be disabled bore you do anything else. If you use iVue then this will lockout your all your clients unless you do a hack for it not to send the SR.

Once the the back-end server is locked to one of the clients, then the only way to fix this is to change the MAC. Just to see if you can get it working.

I would suggest disabling/uninstalling iVue and Stalker Client add-on, then go to the your Kodi\userdata\add on_data and delete the pvr.stalker and plugin.video.stalker folders to insure you get fresh configs.

Once that is done work with the PVR Stalker only following the instructions I posted. iVue and Stalker Client is not needed for this.

Im not running Ivue guide with it as I haven't got that far, the only way I can access Live tv is through thr IPTV stalker add on, I have deleted the pvr stalker that came with kodi 15.0 for the pvr stalker NFPS, shall I update to 15.1 and use the stalker client that is loaded with 15.1? so that will give me a fresh start?

 

[Johnnymo9210]

Uninstall the stalker client

Stalker PVR Setup Instructions
1. Go to this link and generate a new MAC. hxxp://www.hellion.org.uk/cgi-bin/randmac.pl?scope=global&oui=00%3A1A%3A78&type=mult icast. Replace xx with tt.
2. Associate the new MAC with your donation. If it fails, repeat 1 and 2 until it accepts the MAC.
3. Go to Settings, Addons, PVR and select the Stalker Client.
4. Select Configure.
5. Select Portal 1
6. Enter the MAC address that you generated and linked in steps 1 & 2
7. Enter the Server Address. It can be hxxp: //portal.iptvprivateserver.tv/stalker_portal/c/ or 11.iptvprivateserver.tv Replace xx with tt.
8. Set the Time Zone your in. You can use this site to get the correct Time Zone Name: hxxps://en.wikipedia.org/wiki/List_of_tz_database_time_zones Replace xx with tt.
9. Use your donation number for both Login and password.
10. Set Guide Preference to Prefer Provider
11. Set XMLTV Scope to Remote URL.
12. Set XMLTV Remote URL to hxxp://is.gd/NFPSF Replace xx with tt.
13. Click OK to change it.
14. Go to C:\Users\<LOGIN>\AppData\Roaming\Kodi\userdata\add on_data\pvr.stalker on Windows or
/sdcard/Android/data/org.xbmc.kodi/files/.kodi/userdata/addon_data/pvr.stalker on Android and open the settings.xml
15. Insure the connection_timeout value is at 60 and then save the changes.
16. Go back to Kodi and assuming you still have the Stalker Client Plugin up and enable the Stalker PVR Client. If not see step 3 to get back to it.
17. Back out to your Kodi Settings Menu and select TV/Live TV and enable the Live TV.

This should start the PVR Stalker client. Give it a few minutes to load the guide information. Once loaded you should have a TV option on your main menu (Skin Dependent).
Select it to watch TV. You should also have a sub menu under that for the EPG.

on line 14 I get to settings.xml and it wont let me open it. it says settings.xml then to the right off it, it says 3.98KB

 

[Alucard]

PVR Stalker comes with Kodi 15 so yes you could do that. Just need to make sure you do step14.

As far as you not being able to open the file, you should be able to use Note pad or any other text editor to open it.

 

[Johnnymo9210]

PVR Stalker comes with Kodi 15 so yes you could do that. Just need to make sure you do step14.

As far as you not being able to open the file, you should be able to use Note pad or any other text editor to open it.

ok so I should be using PVR Stalker and not "stalker client"? all I have in the PVR clients that start with PVR is PVR demo client, PVR filmon client, PVR IPTV simple client , PVR WMC Client

 

[Johnnymo9210]

PVR Stalker comes with Kodi 15 so yes you could do that. Just need to make sure you do step14.

As far as you not being able to open the file, you should be able to use Note pad or any other text editor to open it.

also confused on how to install a text editor on the amazon fire tv

 

[Alucard]

The PVR Client is in Kodi 15+. There is a sticky that has the PVR client so you can download it and install and that one I don't think you have to do step 14 on.

As for editing the file. I would suggest you install ES File Explorer. That will allow you to move files around from the FTV and your machine. It also has an FTP Server so you could use a FTP client to move files. That is what I do. If you do use the FTP Server you will need to be on wireless though while your using the FTP Server.

 

[Johnnymo9210]

Yep that's right that's the stalker that you can change the timeout to 60, I will not need to do step 14 then as I can do it from that, however once I complete all the step is saying stalker client unable to load channels , I just can't get around it lol

 

[Xiloh]

I had this problem and continue having this problem with NFPS. I couldn't get the stalker pvr client to work without giving me the "unable to load channels error". What eventually worked was doing a clean install of the Stalker addon (9.0.19) then changing my mac address with papiao and changing the timeout to 60 on the pvr via xml file.

It seems even if you do don't sent the SN# and do a clean install, the mac address gets blocked in 24hrs once you change it???