Android IPTV STB Emulator

[asteven14]

When using the MX Player you have to exit to change channels.

Thanks for your reply

 

[NOTORIOUS VR]

Hello, I have the latest version (I use the paid/Pro version), I have setup the portal info/URL and MAC address (for IKE66)... emulator configured to MAG 250, after reloading the portal I get the login box and after entering the user/pass and pressing ok is a stuck loading bar:

I was told to ask here for help instead. Route is confirmed active via IKE66 site.

FWIW, I've just tried with the "official" IKE66 emulator (which seems to be just a hard coded version of this one) and same thing happens.

My device BTW is a Nexus 6P with latest version of 6.0.1

 

[Marley]

if you update the box to latest software and load the right url and mac address you should be fine most of time it human errors

 

[NOTORIOUS VR]

if you update the box to latest software and load the right url and mac address you should be fine most of time it human errors

If you read my post you would see that I am on the latest version and I have entered the right URL and MAC.

You will also see that I have tried the "official" IPTV EMU for IKE66 where the URL is even hard coded (cannot change) and all I had to do was enter my MAC address. I still get the same issue.

There are no errors on my end, I assure you. The issue is either with my account or with the Emulator itself.

 

[NetDabler76]

If you read my post you would see that I am on the latest version and I have entered the right URL and MAC.

You will also see that I have tried the "official" IPTV EMU for IKE66 where the URL is even hard coded (cannot change) and all I had to do was enter my MAC address. I still get the same issue.

There are no errors on my end, I assure you. The issue is either with my account or with the Emulator itself.

I guess you got it running then?

 

[Marley]

now if it a mag you use the 79 what they gave you in manual emulator you use the 78

 

[NOTORIOUS VR]

I guess you got it running then?

Not really, it worked once after trying after another hour or so and I was able to browse all the channels and watch live TV... all without changing a thing.

I then tried later this evening again, without changing anything and I'm back to the loading bar being stuck 1/8th of the way at the beginning.

asft, I'm using a 78 MAC. Again, this is NOT a config issue. It randomly working for me once absolutely confirms this to me.

I currently let it sit at the loading bar thinking maybe it will continue eventually. It's been at the same spot for about 2 hours now.

 

[pokermasterd]

try resetting your internet connection. last time it sat at loading bar on me that fixed it up real quick

 

[abboo]

are you being blocked by your ISP?

 

[djjungly]

Is there any android stb that can run stb emulator without external video player? I am using myGica and in order watch all channel properly I need to activate external player which doesn't allow channel chaning by pressing up or down button. Any box works without external player or I would have to buy mag box?

 

[suport]

some one have yasem working all i get is loading bar

View attachment 1676

 

[deadlysinz]

i am using the pro emulator and yellow bar only fill around 5% and stuck there. it ask to put in user/pass and i did but remains stuck. i try redoing the profile still the same.

 

[Gilmey]

I have the same problem as deadlysinz. Any idea what can be wrong?
Im with the rocket server

 

[wickedjoker]

what version of the emulator?

 

[Gilmey]

7.14.02 the latest

 

[lwilli1026]

Not really, it worked once after trying after another hour or so and I was able to browse all the channels and watch live TV... all without changing a thing.

I then tried later this evening again, without changing anything and I'm back to the loading bar being stuck 1/8th of the way at the beginning.

asft, I'm using a 78 MAC. Again, this is NOT a config issue. It randomly working for me once absolutely confirms this to me.

I currently let it sit at the loading bar thinking maybe it will continue eventually. It's been at the same spot for about 2 hours now.

I am having the same problem. I configured it once, it works fine, then I load it up later that day or the following day, and It sticks at the loading blue bar. There is something wrong.

 

[Mdiraq]

The STB Emulator latest version will not connect nor let me even put in a login or password. My NVidia shield keyboard comes up but it will not type in the boxes. Anyone else have this problem?

 

[latinking]

Been having the same issue all week. It wont let me type login or password using remote or keyboard!!!

 

[Mdiraq]

Been having the same issue all week. It wont let me type login or password using remote or keyboard!!!

I just got it to work but it was in some other numeric lettering lol but the loading will just stop less than a quarter on the loading bar....Something is wrong.

 

[montell]

Hi guys,
in order to watch adult channels, how can I enter the 4 zero code on the screen by my remote? cause I don't seem to be able to do that?
what function should I use on my remote ( cause my remote has no number values on it) to enter the 4 zeros?

thanks