Stalker Client NFPS Release Thread

[canadiens900]

Ok got it up and running on my first, i hope it works on the 2nd asell

As i dont want to drag the box up and down the stairs, reason why i bought 2 of them

 

[kastaway]

can not load DLL on android

Can anyone tell me if there is a easy fix for the can not load DLL on android box...I am using Nvidia Shield and gettin this error when I try to use pvr.stalker.nfps

thanks

This fork of the add-on is intended for use with only NFPS, IPTVRocket and IPTV66. It is a simplified version in terms of what needs to be configured in the settings.

This thread will be updated with more info as time passes.


setup
only two settings need to be set correctly for this add-on to function
1) set 'Active Portal' to 'NFPS', 'IPTVRocket' or 'IPTV66'
2) set 'MAC Address' to the last 3 hex groups of the mac address assigned to your donation. example: if your mac address is 00:1A:78:XX:XX:XX, only enter XX:XX:XX


general info
- only works with the following versions of kodi:
kodi 15.0 isengard
kodi 15.1 isengard
kodi 15.2 isengard

- you can install this add-on along side the main kodi add-on version. it will appear as "Stalker Client NFPS"
- any value entered for the 'MAC Address' setting is prefixed with 00:1A:78
- there will not be a linux version
- there will not be an ios version
- a serial number is automatically generated internally
- your donation number is only needed for loading epg data
- after setting a new mac address you may get an "Authentication failed." message. wait at least 30 seconds before changing anything

- on android, if you get the following error, I cannot help you. nothing is wrong with the add-on




version: 20151215

android: https://mega.nz/#!mRRADCqD!FkEU-uMz8hVcSWKkFKcuajqnRfbi5RxuKQZSdP1LlnA
android (intel): https://mega.nz/#!7YxjhAAL!cN4z9Zcjl4D0UoDRDE8GTRQU3EXTVBigsFmn9OwK2iM
windows: https://mega.nz/#!nUAFRASZ!Bbd-kA07hyxXvnysp7Twxpy7pYwRxfMIYi9mSfWPKs0
osx: https://mega.nz/#!SBpmUJ5R!Mq3_pKuRmONfPtkKqzbGhnTUYWDxGvivrg8Ydd2jGHs
raspberry pi: https://mega.nz/#!bZwjFKxS!JUZ2aibCbn2QEnJwe-cM-R3CGmjxHBzpxJHFlHw7R-I

 

[psycon]

read the forum stickies.., perhaps the one that has this very issue in the title

 

[geezy]

Im trying to get setup and i keep getting the error unable to load channels when i enable the pvr client. This is on windows running isengard.
Any idea which setting might be wrong?

 

[the_sim]

The guide shows up one hour behind and there is no place in the addon configuration to make any changes. Is there anything that I can do using if I want to continue using this addon?

 

[tuxen]

The guide shows up one hour behind and there is no place in the addon configuration to make any changes. Is there anything that I can do using if I want to continue using this addon?

yep, change your mac, and kodi/stalker will load it correctly again. i have had this issue myself.

 

[matrixebiz]

Hello, when I create my own Group in the TV section and setup the channels I want in there, when I Exit and Launch Kodi it is gone. Is there a fix for this?

 

[maxriot1888]

Hello, when I create my own Group in the TV section and setup the channels I want in there, when I Exit and Launch Kodi it is gone. Is there a fix for this?

disable synchronise groups with backend - if you've already done this and its still happening - its a known bug in Isengard, you will need to update to Jarvis

 

[matrixebiz]

disable synchronise groups with backend - if you've already done this and its still happening - its a known bug in Isengard, you will need to update to Jarvis

Ok, that must be the issue then, I'll have to upgrade to Jarvis. Is Jarvis in the Android google store yet?

 

[maxriot1888]

Nope, you will need to download it direct from kodi, RC2 released today, if you've this pvr client installed, you will need to download the kodi 16 version, as I'm not sure it will update itself,

 

[Standen1986]

Sorry for possibly being stupid but am I right in saying that Stalker Client will stop working for our IPTV subscription and we will need to use this new version Stalker Client NFPS?

 

[psycon]

kodis included pvr.stalker should remain working. a new version of pvr.stalker.nfps will also be released that has much simpler setup.

 

[Standen1986]

Okay. It was a nightmare for me to set up to begin with. Didn't want to have to do it again on another addon.

Does the Kodi included stalker client work on Kodi 16? I tried and kept getting an error.

 

[psycon]

works for me without issue.

 

[dara]

Okay. It was a nightmare for me to set up to begin with. Didn't want to have to do it again on another addon.

Does the Kodi included stalker client work on Kodi 16? I tried and kept getting an error.

So we don't get too off topic on the different stalker client versions, please post in an appropriate thread. There are more settings for the built in version.

If you are getting "can't load channels" try bumping up the connection timeout and check your settings, disable TV, clear data, then enable TV.

 

[tuxen]

hi tuxen i to am having this issue for the past few days, still works but its annoying when your trying to watch things. did u ever find out what causes this issue thanks

its normal, it happens if the connection is lost or times out, I dont know if it might happen if the mac is used by another device. you can try and set the timeout to zero or max or disable connection lost warnings under system/tv but I do not think it will help. some say they have succes changing their mac, hence the above uncertain speculation. basically there could be a wide selection of reasons for it to happen.

I think the only way to get totally rid of them is to ask dvbken nicely to make a client option to disable these warning messages. but I could be wrong.

 

[tuxen]

Okay. It was a nightmare for me to set up to begin with. Didn't want to have to do it again on another addon.

Does the Kodi included stalker client work on Kodi 16? I tried and kept getting an error.

I dont think url redirecting has/will be implemented in later versions and it might be your problem, go here:
http://iptvtalk.net/showthread.php?...-ends-February-1&p=91767&viewfull=1#post91767

 

[tito1982]

Hi,

I just donated one month at iptv66 and I received an email with my routes (which is the donation number?) instantly.

I downloaded the NFPS Stalker client addon for Kodi from epg.ninja and then I got it working. I though it would be more difficult...

However when I try to play some channels Kodi shows the working button for around 20 or more seconds to load the channel...The main problem for me is that even if I click ESC can't go back to another scree, so I have to wait till it finally stops because the channel is probably down.

In the NFPS Stalker client addon the timeout is 5. Wasn't it suppose to stop stop after 5 seconds if it can't load the channel?

thank you

 

[tuxen]

Hi,

I just donated one month at iptv66 and I received an email with my routes (which is the donation number?) instantly.

I downloaded the NFPS Stalker client addon for Kodi from epg.ninja and then I got it working. I though it would be more difficult...

However when I try to play some channels Kodi shows the working button for around 20 or more seconds to load the channel...The main problem for me is that even if I click ESC can't go back to another scree, so I have to wait till it finally stops because the channel is probably down.

In the NFPS Stalker client addon the timeout is 5. Wasn't it suppose to stop stop after 5 seconds if it can't load the channel?

thank you

press 'x' or stop (same thing) instead of esc and it will abort so you do not have to wait for it to time out.
timeout in settings is for connecting and authenticating, as far as I know.

 

[MoneyProv]

Hello guys! 1st post here.... hopefully you guys are hard at work fixing the DLL problem for NFPS CLient. as i can not afford to do a total fresh install of kodi. i will lose my reconfigured build spirited by targetin1080p gears of war. thanks a lot.