I'm having a problem on my android box s802 where if I put the guide preference to "xmltv only" then it comes up blank. If I put any other option, the guide shows up; I assume that it is only pulling data from the "provider" whatever that is. However, I have a few issues with this:
1. it's very slow to load
2. It does not support colored guide like xmltv epg grabber
3. DST is always off so the guide is off by 1 hour
I have successfully set up everything on my macbook with "XMLTV Only" and it works perfectly fine. It's just an issue on my android box. Anyone else run into this same issue?
Im having the same issue, the provider guide is off by an hour and when I try to use the link as described in the tutorial to pick up the english only channels it shows blank. Sucks.
For XML only to get colored EPG you need to pull it from papiao.is server and enter remote url in this syntax replace xx after /mac/ with your Mac and enter donation number after donation/
Code:
NFPS or Rocket : https://papaio.tv/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxx/fname/<guide>
IPTV66: https://iks66.tv/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxxx/fname/<guide>
Replace "<guide>" with one of the following:
NFPSF1= English,
NFPSF2 =English with non-DST fix (if your guide shows to be off by an hour, clear database and restart kodi after setting to this)
NFPSF3 =Full
NFPSF4 =full with non-DST fix (if your guide shows to be off by an hour, clear database and restart kodi after setting to this)
I'm using an android box mxq running kodi 15.2 stalker client 0.8.4. I am not getting any error when loading the channels but when i click on the live tv on the main screen all that comes up is a black screen. I have had the loading channel bars and epg bar fully load before clicking on live tv. Any help would be appreciated as I didn't have any issues before the security change.
ok i'm lost here https://iks66.tv/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxxx/fname/<guide>
Replace "<guide>" with the following:
NFPSF1 - English
NFPSF2 - English, non DST
NFPSF3 - Full
NFPSF4 - Full, non DST <all thexxxxx need to but the number in it place of the xxxxxx and on end guide replace it with witch one or all 4 > thanks jc cell
ok all good move on to serial number where you get it you make one up and if so how long
device ID do the same do you used a different number or the same one as serial number
signature same ? do the same thing or used the same number thanks jc cell
or this the only one need number serial,device ID,signature
To configure, from the Main Page, Select System > Add-ons > My add-ons > PVR clients.
Look for Stalker Client, and Click to bring up Add-on information
This is the version you should be on .... PVR Stalker (0.8.3) View attachment 812
Click on Configure and select General
You can set up to 5 different portals. The Connection Timeout is defaulted to 5. You can set up to 15, but also can raise the value in the userdata > addons_data > pvr.stalker > settings.xml . We will configure Portal 1
For MAC Address, enter your MAC that had been linked to your donation. Your linked mac is 00:1A:78:xx:xx:xx , where the x's are Hex digits (0-9, A-F). The colons are required, and there is no letter 'oh'.
For Server Address, enter the IPTV Server that was assigned to your donation
If you select an external EPG, select Remote URL and enter one of the following
Valid EPG Links:
Code:
Please see the following site for more info:
http://epg.ninja
TBA: Links that will work for the built in PVR Stalker
nfps or rocket : https://papaio.tv/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxx/fname/<guide>
iptv66: https://iks66.tv/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxxx/fname/<guide>
Replace "<guide>" with the following:
NFPSF1 - English
NFPSF2 - English, non DST
NFPSF3 - Full
NFPSF4 - Full, non DST
Set a custom Serial Number in Advanced
- The Serial Number, Device IDs and Signature can be a combination of letters or numbers. Token is not currently required.
Click OK to save your settings. Click on Enable to enable the client.
Navigate to the Main Window, select Services > TV (or Live TV) > General
This is a screen shot of the TV Settings. Stalker Client must be Enabled in "My Addons". If you have issues with a load of channels, Clear Data, and Disable/Enable will sometimes correct the issue. Also, refer to the tutorial linked above.
Its not just you. I followed the instructions to the tee using the NFPS server and I get the same error as you do so I gave up. I hear its nice IF you can ever get it working. The only thing I can think is that I'm using the Stalker Client 0.8.4 that came with the fresh install of Kodi 15.2. Problem is there are so many different sets of instructions out there you don't know which to use anymore
I think if you just follow the directions as put in the first post of this thread, you will be able to get it going. Sometimes issues are with your connection, and latency, or the response from the server which is why you may have to vary the timeout connection. Another assumption is that you are clearing data in the TV settings. Usually, cycling the PVR from that setting will help. Finally, it can actually be your device, or available memory. Kodi uses a lot of storage and ram, and you may be running other things so it just can't get going.
The first time the guide loaded I had 1017 channels.
Now I only have 876?
Where the heck did the 141 channels go?
its all the ppv channels, I want those ones back, anyone know how I can get them back?
thanks folks.
P.S. I didn't change anything, I just re-booted the computer.
I have tried numerous of times and I am unable to get anywhere with IPTV stalker, this is really frustrating, help would be greatly appreciated. Its loaded on to my android tv
I have tried numerous of times and I am unable to get anywhere with IPTV stalker, this is really frustrating, help would be greatly appreciated. Its loaded on to my android tv
This thread is for PVR Stalker not IPTV Stalker. Please ask your question in a releated thread or open a new one asking for help in the proper section.
And if you do post there, be a little bit more specific. Saying "I am unable to get anywhere" gives us little to go on. What version of IPTV Stalker did you install? What configuration steps did you take? What error message(s) are you receiving?
I need some help please. I have followed all the threads and instructions to setup PVR Stalker and I keep getting unable to load channels.
I am running Kodi 15.2 with the PVR Stalker. I have made my donation to iptv66 and linked my donation to my mac address.
Everything is filled out Mac Address - server - http://66.iptv66.tv and I tried without the http:// as well - S/N and device ids and signature are all filled out. I have increased the timeout to 15 and nothing is working.
I have been going at this for two days - I also have tried clearing data numerous times and enabling and disabling and the TV function. I keep getting the same error that stalker is unable to load channels.
Can anyone provide any insight or ideas - I am at a loss right now.
like someone tell me with the problem
here my setting and said channel add-ON
add-ons PVR clients
stalker client enable click on this said on add-on information disable so how you get them both to be on enable ?
configure click on this general i have active portal 5 connection timeout 15 click OK
settings- stalker client
portal 1 mac address 00:1A:78:xx:xx:xx my number on xx
server address 66.iks66.tv
perference XMLTV ONLY
REMOLE URL HTTPS://IKS66.TV/MAIN/epg/MAC/00:1A:...XXXXX/DONATION /XXXXXXXXXXX/FNAME/NFPS1e/ ON X MY NUMBER THAT I WAS GIVE ON EMAIL
serial number 12 number and 1 letter
device ID 4 number
deviceID2 4 number
signature 4 letters
then OK TO SAVE
AND IT SAID NOT CHANNEL LOADED ?
I know im a noobie but if it helps I'd like to add.
I had a terrible time getting pvr to work(unable to load channeld,ID mismatch,etc)
Finally got it by making sure serial#,Id's, and signature match in the pvr client and the stalker video add on. clear cache after each step.
disable pvr and live tv and clear data before you add the info to stalker video add on.
once your up to setting up stalker pvr, make sure you also add the xmltv url "hxxps://papaio.tv/main/EPG/mac/00:1A:78:xx:xx:xx/donation/"your donationnumber"/fname/NFPSF1"
clear cache again enable stalkerpvr client and then enable live tv.
you might have change mac once. Save those other numbers(serial,Is's, and signature). they will work if you change builds
worked for me when everything else didn't.
p.s. if there's an "fname" that gets less channels(preferably english/us) please post it. NFPSF1 loads real slow on my fire stick...
