Android IPTV STB Emulator

[RICHIEKHOURY]

what would cause the stb emulator to freeze up while scrolling up and down through the channels and then reboot ? the channels show up fine ..and the vlc plugin seems to work ..it shows the picture when I press ok...any ideas ? cant seem to figure out what would cause it to freeze and kick me out..I am using a dreamlink T6 box under android apps

[priya]

For best video picture quality play back what setting should be used in the emulator. Also would one get better picture quality using internal or external player like xmtv. or please recommend one with settings info. Thanks

[bikswahla]

What Serial # to use, my stb emulator not working and it is saying on screen" Please contact your provider to register this device"

[zensat]

For best video picture quality play back what setting should be used in the emulator. Also would one get better picture quality using internal or external player like xmtv. or please recommend one with settings info. Thanks

with internal or vlc with internal plug in you can change channels directly from player.....
so you don't need to go back in menu every time you change channel...

[priya]

Ok i tried with internal player all i get is black screen....... if i use external like vlc or mxplayer.... picture works, what would cause this issue.

[big dady]

What Serial # to use, my stb emulator not working and it is saying on screen" Please contact your provider to register this device"

http://iptvtalk.net/showthread.php?9...-is-what-I-did

[apun]

What Serial # to use, my stb emulator not working and it is saying on screen" Please contact your provider to register this device"

I am using STBemu v 6.0.16 & I got it working with the instructions below:

INSTRUCTIONS TO USE CUSTOM DEVICE ID on STB EMULATOR, Rather than a LONG one that is generated.

1 start STB emulator
2 press Menu button - Settings - Profile
3 Create your appropriate server Profile name (NFPS/ROCKET/IK66)
4 Open that profile and enter the Proper URL of the server in "PORTAL URL" under "PORTAL Settings"
5 Enter your MAC Address (00:1A:78:XX:XX:XX) (Replace XX with your proper number/letter!)
6 Enter a Serial Number (any 13 digits and then select OK to save)
7 select Device ID :
A) Make sure first option "Use MAC-BASED DEVICE ID" is Unchecked
B) Scroll to "DEVICE ID" and enter any set of numbers and letters (I used a 23 character long ID with number and letters, you may be able to use shorter or longer (Not 100% sure!))
C) Make sure "SEND DEVICE ID" is checked

8 press return button on your remote to STB emulator main page
9 press Menu button and exit STB emulator
10 Restart STB emulator and the portal should load all the programming

*If it still gives error, Change your MAC Address to a random address and then Change it back to your real one, then restart STB emulator and it should work.

** If you use another device with same MAC, copy the SAME "mac" & "serial number" & "device id" into the settings of that device and then both will work (one at a time of course)

Enjoy

[apun]

I am using STBemu v 6.0.16 & I got it working with the instructions below:

INSTRUCTIONS TO USE CUSTOM DEVICE ID on STB EMULATOR, Rather than a LONG one that is generated.

1 start STB emulator
2 press Menu button - Settings - Profile
3 Create your appropriate server Profile name (NFPS/ROCKET/IK66)
4 Open that profile and enter the Proper URL of the server in "PORTAL URL" under "PORTAL Settings"
5 Enter your MAC Address (00:1A:78:XX:XX:XX) (Replace XX with your proper number/letter!)
6 Enter a Serial Number (any 13 digits and then select OK to save)
7 select Device ID :
A) Make sure first option "Use MAC-BASED DEVICE ID" is Unchecked
B) Scroll to "DEVICE ID" and enter any set of numbers and letters (I used a 23 character long ID with number and letters, you may be able to use shorter or longer (Not 100% sure!))
C) Make sure "SEND DEVICE ID" is checked

8 press return button on your remote to STB emulator main page
9 press Menu button and exit STB emulator
10 Restart STB emulator and the portal should load all the programming

*If it still gives error, Change your MAC Address to a random address and then Change it back to your real one, then restart STB emulator and it should work.

** If you use another device with same MAC, copy the SAME "mac" & "serial number" & "device id" into the settings of that device and then both will work (one at a time of course)

Enjoy

I guess I was too early to verify that same device ID can be used in STB Emulator and another app (like IPTV STALKER in kodi), but turns out "IT DOES NOT WORK" that way, IF you register the device ID using stb emulator it will only work in stb emulator and vice versa.

Has anyone gotten same settings to work in both STB EMULATOR app & IPTV Stalker on kodi ? (using same credentials i mean, like same MAC & Serial number) ?? Really would love to switch between these two apps on my box, but currently I am only able to get one working (Which ever I activate first using new MAC). ?

[Roach46]

Has anyone gotten same settings to work in both STB EMULATOR app & IPTV Stalker on kodi ? (using same credentials i mean, like same MAC & Serial number) ?? Really would love to switch between these two apps on my box, but currently I am only able to get one working (Which ever I activate first using new MAC). ?

Running an M8, with kodi 15.2 stalker pvr 8.3 or 8. 4 , cant remember right now, using stb 6.16, using the mac i originally signed up with, made Up serial # etc, stb and, stalker have the same settings, both work fine, i really dont get changing mac and all, and i am using 78: in the mac address, i used the same instructions for the stb, except i did not change the mac, how ever it took 4 or 5 trys, and what made it work, was i unplugged the box for a few mins.

[jrn8265]

APUN, awesome information!

I am a new user with a new donation. I entered my 78 number into my STB emulator software on my Chinese Android M8 and the service is working well.

BUT.....

I did not generate any Serial or Device ID's or check the Send DEVICE ID info. I used all defaults on the profile. Yet it still works. If you were me would you let this go since it is working or proceed with adding\changing serial and Device ID and send button check?

My concern is, of course, that it stops working at some point! Thanks much!