Hi after loading .807. I did get it to work but have a few small things going on in my android box. 1 my remote would not work to enter username password sort of. When i was on a line could enter text fine but would not go to next line tell i used on screen keyboard then back again to go OK. also my screen shows channel list in black and white very messed up did i miss something took along time to get setting right but after a week of no TV and no help from anyone else. Thanks for making this work again. After a week of no TV at least i can watch again.

Only a week? I haven't had the service for almost TWO months now.

i did get .807 working if your like me you will need to replace the old STB emulator will not work anymore. No one else here told me that. No help here at all tell this set of messages. Good news is fewer setting to get it up and running but there are a few small things get .807 set it up best you can then read all the messages here and deal with one thing at a time tell your rocking worked for me - my small issue noted above. as Well as this

Was working now it says contact provider to register box now what.

Will that stbemu work on a T6 clone, which is what I *think* I have?

pokermasterd said:

i did get .807 working if your like me you will need to replace the old STB emulator will not work anymore. No one else here told me that. No help here at all tell this set of messages. Good news is fewer setting to get it up and running but there are a few small things get .807 set it up best you can then read all the messages here and deal with one thing at a time tell your rocking worked for me - my small issue noted above. as Well as this

Was working now it says contact provider to register box now what.

Click to expand...

yes I keep getting the same message, but I reset my mac address everyday to watch chs.

After loading 0.8.07 onto my Dreamlink T6 I'm getting error when I load username and password.Anyone else having the same problem.

0.8.7 is great! My buddy tells me that with this version the PPV movies are working again for IPTV Express! Thanks much! Any chance you can take a look at the "Catch-up TV section". He say that he doesn't see it anywhere on the list. Once again, thanks for all the hard work.

Need a link to download the 0.8.07 version please?
Thanks.

ok got it
[h=2]New release 0.8.07[/h]

v0.8.07
* A lot of optimizations. The app should work better for most users.
* Updated Ijk player to v0.6.1.2
* Added support of MAG 256.
* Fixed slowmo when starting playing a stream in Ijk player.
* Fixed internal update service.
* Fixed support of MAG's internal portal.
* Fixed support of software remote controls.
* Fixed incorrect preview window position in some cases if using auto player.
* Fixed aspect ratio in auto player.
* A lot of bug fixes.

Free version
armv7a Code:
https://mega.nz/#!MdwlhbqD!P8NaP7z70vsit0sCcf-loBc3R_5nrNOiGpNiMtngfMs
x86 Code:
https://mega.nz/#!NdhW3DaS!1uEQkvyBeXJCDA6901ofcxJa0sLZfI11noY-mv5MYE8
NFPS
armv7a Code:
https://mega.nz/#!9Uwy3ASR!TokR-d4f4FKlGjL1urlaDItlaczJyi23FQWmSVu1Nuo
x86 Code:
https://mega.nz/#!NVQAhDQC!Iv5uP2jxZfgqCm9AJ-2yevy5MzVDTfF6FvmldPwzWQQ
Rocket
armv7a Code:
https://mega.nz/#!kExhSb5I!h6zmLLgMXy5__vZe1kmmjQM3HY9MfydyYzXEbNFnBFU
x86 Code:
https://mega.nz/#!9cJnmAgR!bDEDDtKaErmr9yIIx-yTJB1dILX8Ulp88sOjXLd9PtA
iptv66
armv7a Code:
https://mega.nz/#!QAQglJTS!G5yXW0kufFtv8981evOY5pG0832FFpFtFJAsIyLVOU8
x86 Code:
https://mega.nz/#!lJxxRYxS!z6vmwBqib2bri4Y2Slk6VrfnOWcXAdOnw2rM-slewGg
​

i found i bad issue
after load the channel the first time (android tv/android smart phone) the channel list can't load anymore ONLY after i clean the cache in the setting application of the android box/smart phone
is very annoying at the moment i can't find a fix
any suggestion will be very appreciate

yellows said:

ok got it
[h=2]New release 0.8.07[/h]

v0.8.07
* A lot of optimizations. The app should work better for most users.
* Updated Ijk player to v0.6.1.2
* Added support of MAG 256.
* Fixed slowmo when starting playing a stream in Ijk player.
* Fixed internal update service.
* Fixed support of MAG's internal portal.
* Fixed support of software remote controls.
* Fixed incorrect preview window position in some cases if using auto player.
* Fixed aspect ratio in auto player.
* A lot of bug fixes.

Free version
armv7a Code:
https://mega.nz/#!MdwlhbqD!P8NaP7z70vsit0sCcf-loBc3R_5nrNOiGpNiMtngfMs
x86 Code:
https://mega.nz/#!NdhW3DaS!1uEQkvyBeXJCDA6901ofcxJa0sLZfI11noY-mv5MYE8
NFPS
armv7a Code:
https://mega.nz/#!9Uwy3ASR!TokR-d4f4FKlGjL1urlaDItlaczJyi23FQWmSVu1Nuo
x86 Code:
https://mega.nz/#!NVQAhDQC!Iv5uP2jxZfgqCm9AJ-2yevy5MzVDTfF6FvmldPwzWQQ
Rocket
armv7a Code:
https://mega.nz/#!kExhSb5I!h6zmLLgMXy5__vZe1kmmjQM3HY9MfydyYzXEbNFnBFU
x86 Code:
https://mega.nz/#!9cJnmAgR!bDEDDtKaErmr9yIIx-yTJB1dILX8Ulp88sOjXLd9PtA
iptv66
armv7a Code:
https://mega.nz/#!QAQglJTS!G5yXW0kufFtv8981evOY5pG0832FFpFtFJAsIyLVOU8
x86 Code:
https://mega.nz/#!lJxxRYxS!z6vmwBqib2bri4Y2Slk6VrfnOWcXAdOnw2rM-slewGg
​

Click to expand...

any one find any problem??

I cannot download the new version on my Mygica. I'm inly getting some international channels.

Anyone know why I might only get international channels?

Help please!!
Is anyone have issues with emulator 8.7 in dreamlink T6? I'm able to get in to the menu but when I select a movie from videoclub keeps saying file missing and when I select a channel from tv give me only a black screen.

Thank you

Using nfps, which VERSION of the stbemu do we download for Dreamlink T6 clone?
I tried clicking on "nfps arm7a" but it only has linux code and not android on the T6.
Thanks for any help.

I been with nfps for years I had issues pro emulator doesn't matter which version I use, but when I try other iptv services no issues with the pro emulator , lve come too concussion that it's the nfps service causing these problems sad state of affairs just like Donald trump

Thanks for that, dog09. Ok, even for other vendors, what exact software/apk do I download to make the T6 work for iptv, please?There was no arm7 Android choice.

try changing media player below settings
ljk works good

v0.8.08
What's new:
* Updated Exo player to v2.0.2 and Ijk player to 0.6.2.2.
* Fixed portal loading if network cache is enabled. *
* Fixed support of audio tracks and subtitles. **
* Fixed Auto player's player selection.
* Fixed some other issues.

* Those who've disabled network cache: could you enable it again to see if it works now.
** Audio track/subtitle selection should work with Exo player. But because of a bug in Exo, sometimes you can see a track with a name "unknown". You may try to select this track, but in most cases the player just stops working after that. So you have to change a channel to make it work again.

Free version
armv7a:

https://mega.nz/#!AMZUSAIS!n8BsBJqFUUhkiWB0YmDsI9Ji59sZumjW9qYagiE0pLs

Click to expand...

x86:

https://mega.nz/#!NVY0WTwb!o2XZTKrhmcMYIn2J9GW4v6byMQHNR5U_ZlAA7Necu0E

Click to expand...

NFPS
armv7a:

https://mega.nz/#!gBxxSKCa!gFPtfMHY5ETq4kh13mvDUUBUN5xjgT1rqV7KGPMGILs

Click to expand...

x86:

https://mega.nz/#!0VwGXKRR!ZE5MXdboWw8UQDIK8xXFAO_QpKKoJMcxcQQNj7Chyvk

Click to expand...

Rocket
armv7a:

https://mega.nz/#!MMRVlaoQ!W9N1w2bNsg66kZAYgAUxQmzLmyueh3DdqtsTaEY0Tn4

Click to expand...

x86:

https://mega.nz/#!EMA01RoL!oULRLZk3eYSRDo6kQjZlvBD0OnpJI4jXFShwWsK2jHg

Click to expand...

IPTV66
armv7a:

https://mega.nz/#!0cBXSJ4S!jtz9t-zJTrdKk-LkxEcIkdNhWSZMfYMKOluLNTN2K20

Click to expand...

x86:

https://mega.nz/#!IYZngaiZ!08nwpqoAPOiYMEb5lVxmC3GpBIq8ivddSUFEUHPrFiQ

Click to expand...

I have had issues since updating to latest version of emulator I lose video on channels intermittently, no amount of resetting helps .I have kept the older version on another box and there are no issues on it. can i revert back to the older version on the other box too?