Epg guide not loading

[ilan]

On the PVR Stalker configuration page, choose Remote and put the following address in the Remote URL field.

http://nfps.**********

You can disable the updater when using the remote url. The updater has no bearing on this process.

[dxtn]

On the PVR Stalker configuration page, choose Remote and put the following address in the Remote URL field.

http://nfps.**********

You can disable the updater when using the remote url. The updater has no bearing on this process.

thanks for sharing the info as instruction given EPG working via PVR STALKER Config ..

[Tizer]

Above method should work with Remote on build in stalker client.

Do a IPTV Reset
(Disable/Delete the Stalker NFPS Addon version if you have it)
Close down
Delete Epg11.db and tv29.db (incase corruption) from C:\Users\***\AppData\Roaming\Kodi\userdata\Databas e
Enable Stalker PVR(built in) and Simple IPTV Client left on Defaults
Run the Ninja EPG updater once with Stalker PVR config checked to get correct IDs into Stalker then totally disable the ninja updater so It doesn't keep flicking back to local xml.
Add http://nfps.********** as a remote source on Stalker PVR

Should work
I'm mostly populated except afew of the UK channels.

[ilan]

Don't make it more difficult than is necessary. As the person in the prior post noted, it is working as I posted. So...

First, check to make sure the time and date are set properly on your device. If they are not, you will not see any information or you will see inaccurate information in your guide.. After confirming that the date and time are correct, proceed with the instructions...

Condition 1 (You were using Stalker client NFPS):

If you had Stalker NFPS enabled, (1) Disable TV, (2) Disable Stalker NFPS, (3) Exit Kodi, (4) Do an IPTV Reset, (5) Start Kodi, (6) Enable PVR Stalker Client and configure it [instructions below], (7) In the EPG configuration portion, choose XMLTV only, Remote, and add the Remote URL that I posted earlier (and that is posted below), (8) In TV > General: Clear Data, (9) In TV > Guide: Clear Data, (10) In TV > General: Enable TV.

Condition 2 (You were using Kodi's built-in PVR Stalker client with the updater):

(1) Disable TV, (2) Disable the updater, (3) In the EPG configuration section, choose XMLTV only, Remote, and add the Remote URL that I posted earlier (and that is posted below), (4) Go to TV > General: Clear Data (5) Go to TV > Guide: Clear Data, (6) Go to TV > General: Enable TV.

=========

Remote URL:

http://nfps.**********

If you're absolutely certain you have everything configured correctly, but the guide will not load, there could be a redirection issue.  Try the longer URL...

https://raw.githubusercontent.com/psyc0n/epgninja/master/guide.xml

The guide for configuring Kodi's built-in PVR Stalker client is available here:

http://iptvtalk.net/showthread.php?16461-PVR-Stalker-%28Kodi-Built-in%29-Set-up-tutorial

[smk185]

simple instruction, easy to follow, that exactly how I need it. It work like a charm thanks so much for you help i hate not having a guide then its only good for sporting events and so when you knw the kick off or else u dont know what your missing lol

[TravisGT]

On the PVR Stalker configuration page, choose Remote and put the following address in the Remote URL field.

http://nfps.**********

You can disable the updater when using the remote url. The updater has no bearing on this process.

Thanks for this! Mine was off to, went to my configuration and the path that was in, was gone. Followed this and it's back perfect now. Thanks again!

[olsts]

Don't make it more difficult than is necessary. As the person in the prior post noted, it is working as I posted. So...

Condition 1 (You were using Stalker client NFPS):

If you had Stalker NFPS enabled, (1) Disable TV, (2) Disable Stalker NFPS, (3) Exit Kodi, (4) Do an IPTV Reset, (5) Start Kodi, (6) Enable Stalker Client and configure it [instructions below], (7) In the EPG configuration portion, choose Remote and add the Remote URL that I posted earlier (and that was repeated correctly in the post above), (8) In TV > General: Delete Data, (9) In TV > Guide: Delete Data, (10) In TV > General: Enable TV.

Condition 2 (You were using Kodi's built-in Stalker client with the updater):

(1) Disable TV, (2) Disable the updater, (3) In the EPG configuration section, choose Remote and add the Remote URL that I posted earlier (and that was repeated correctly in the post above), (4) Go to TV > General: Delete Data (5) Go to TV > Guide: Delete Data, (6) Go to TV > Enable TV.

=========

The guide for configuring Kodi's built-in PVR Stalker client is available here:

http://iptvtalk.net/showthread.php?1...et-up-tutorial

Well still not working for me. Have step two setup. What's next. Note never was using the updater as couch potato recommended not to use with IPTV stalker plus.

[ilan]

Are you trying to set up Kodi's built-in PVR Stalker client? At one point, you said it hasn't been working with the EPG for a year. If that is the case, it sounds like you have issues that are greater than configuration.

[Roach46]

I used # 2, did the iptv reset, clear data, guide is working, not 100% but is working

[Sandslew]

I used #1. Worked like a treat. Thanks so much!!