IPTV StbEmu Release thread - All Versions

[Bkman2020]

App as well there is a bug.

[Switchon]

I think I figured out away to get round the "please contact your provider to register this device"

I think there is a bug in the newer versions but only when you remove power and reset the box.


On restarting it goes to "Please contact your provider to register this device" With the red yellow and blue buttons across the bottom of the screen!!!

On M8S and auto updated from 7.11 to 7.12. Going to check old version out again!!!

Update .. Same thing happening on 7.11.1 !!!!!!! Cause now I've run out of resets ... they call this testing LOL

I went back to Version 7.11 and used the free google play version, then set the radio button send Device ID (Not available in the Provider versions as it's hard coded with other Device ID setting). Completed the setup and after a successful login removed power and rebooted, logged in again with no problems.

Finally did an auto update to the latest 7.12 with no login problems either.

Probably the provider versions must be changing some data i.e. Device ID on a power Off/On situation even after the initial successfully setup?

It's obviously more complex than just that but got me saving on my IPTV resets ;-)

[trinifire]

It's stuck 1/4 way of the bar . Any idea why? Correct donation and mac placed

[Switchon]

I posted this elsewhere but thought I'd post on the thread as well and see if there's an answer, I'm on the latest version of STB emu, .12 I believe, and whenever I reboot my box and THEN try to watch TV I get a "please contact your provider to register this device" message. I then have to reset my IPTV from the site and it'll work fine. I've tried doing a clean install but am running into the same problem. Anyone else encountering this and/or have advice on how to fix it? I personally don't care but I am a reseller so it may be a pain in the ass for customers.

P.S. The problem didn't exist before, it's new.

Try reading this as it started with the Device ID verification :- http://iptvtalk.net/showthread.php?1...l=1#post115949

Update:- With the provider versions it could be just the install methods or just on some boxes? i.e M8S

[Bkman2020]

go to settings profiles then advanced settings uncheck everything except ajax support save and exit reboot app should work now.Update: If still have issues uncheck ajax support, save exit as it is working great for me so far .

[bigpoppapaul]

@Switchon and @Bkman2020
I ended up switching to the STB Emu from the Play Store (rather than the iks66 specific one I was using), I'm guessing it was the "send device ID" option missing that caused the problem. Once I set that up, it's worked beautifully. Thank you both for your help.

[atlas1321]

v0.7.12
* Added Android TV support (Nexus Player, NVidia Shield, etc). (Not in Google Play yet, have no idea why Google doesn't accept it).
* Updated IjkPlayer.
* Uses Android's timezone for EPG by default (instead of hardcoded one). (New profiles only)
* Holding OK key for about a second now opens the app's menu (useful for Android TVs).
* Fixed keymaps.
* Fixed menu issues on some devices.
* Fixed some other bugs.

Free version
armv7a

https://mega.nz/#!hQQWQBaK!4iQjqehzboKUq9wntoUc-7v448zFTAWYgDqxW3xC5D8

x86

https://mega.nz/#!BRIQRQgZ!NmOUFoBDDAE2J8we2k-5yfS5UkgWQiAj9tm0OkJL5lI

NFPS
armv7a

https://mega.nz/#!ZA41QTYR!RR9STZNOmDWoCzc07nX3wRB_8fAbcCTKg8tIpk9s07Q

x86

https://mega.nz/#!YAR31QSK!4fGKzF3tk6wo4AOQY1GQq0T03uTQ3_7zT46yXbjT06o

Rocket
armv7a

https://mega.nz/#!YQRxEKbS!bRUxgr8gX7yukE-uG2GeFTFWdkLBdMYzNPPHQIr2fFE

x86

https://mega.nz/#!UZJ0QKZJ!Ee58BQD_vXU3FEzUbetHW5jfLMpzrfJfGZhk-Nqnbpw

iptv66
armv7a

https://mega.nz/#!8MxRjAjT!p9K4epOpVEqbcgDR7FL_q5nue6gkwmHAkWEw-DrKvh4

x86

https://mega.nz/#!hMY2iRaR!lkHx9psKdpabG6T3VDtFQ2LOAvL0N8aHftUTX-9qkfU

Which version ahould be installed on nexus player. It has an atom processor. X86 or arm

Also how do you send device id. Is that in the advanced tab
Thanks

[dara]

Which version ahould be installed on nexus player. It has an atom processor. X86 or arm

Also how do you send device id. Is that in the advanced tab
Thanks

x86. Some are reporting that the customized versions don't work because there is no obvious way to check if the device id is being sent, but it is, and you need to IPTV Reset to capture the info. If you aren't comfortable with that, use the general "free" or paid version to set up how the emulator sends out the device id. The Device ID setting is in the individual Profile setting.

[atlas1321]

x86. Some are reporting that the customized versions don't work because there is no obvious way to check if the device id is being sent, but it is, and you need to IPTV Reset to capture the info. If you aren't comfortable with that, use the general "free" or paid version to set up how the emulator sends out the device id. The Device ID setting is in the individual Profile setting.

I have tried so many times to install the custom builds on a fire stick and after a day it comes pack with contact your provider error. I do not know if it is a firestick issue or what, so I placed an order for a nexus player. very frustrating ordeal.

[atlas1321]

x86. Some are reporting that the customized versions don't work because there is no obvious way to check if the device id is being sent, but it is, and you need to IPTV Reset to capture the info. If you aren't comfortable with that, use the general "free" or paid version to set up how the emulator sends out the device id. The Device ID setting is in the individual Profile setting.

Dara
Do you know how i can dowload the paid google version apk to try running it on the firestick
Thanks