IPTV StbEmu Release thread - All Versions

LEAFER9999 · Feb 3, 2016

nope, i inputted donation number after changing mac to a new one no issues there , but channels will not load or play, guides there with info etc
just black screen but movies play ok

FreeTVLanz · Feb 3, 2016

I have a weird one.

On boxes that did not use their donation before, it works.
On boxes that were set up previously, they don't

Peculiar.

Johnboy89 · Feb 3, 2016

Iv switched to pvr client nfps. No problems.

tuxen · Feb 3, 2016

come on guys, i'm tempted to ask if you can you read at all?
mvas acknowledged that there was a issue with the internal player early on already in post #7, and he will release a new version.

superbob · Feb 3, 2016

mvas said:
I found a bug in ExoPlayer. Some or even all streams may not work. The fix will be tomorrow. For now you'd better use another player.

the problem reported above (and with me) affects all players , not just ExoPlayer. Authentification Problem is flashed up on TV channels.
VOD works fine though, so accounts are still valid?

tuxen · Feb 3, 2016

that's sounds like they are still doing maintenance.

frxa1989 · Feb 3, 2016

Hi, everybody, In the newer version of the stb emulator , authentification process what user and password I Have to put ??

superbob · Feb 3, 2016

User and Password is your Donation Code, it took me quite a few goes to get mine accepted but eventually it went in.
Worked great last night, but today TV is a black screen...

mvas · Feb 3, 2016

v.0.7.11
* Fixed Internal player and Exo player don't play some streams.
* Added a configuration option to change browser scaling mode if portal is too big or too small.
* Fixed some crashes.

I didn't find a correct way to make portals look good on all devices, so there's a new configuration option "Scaling method" in Common settings->Browser settings. By default most high resolution devices should use "Default" method. But if portal is too big try to change to "Alternative 1" (usually on devices with a low display resolution (less than portal resolution, 1280x720)). If this still doesn't work change to "Alternative 2" (this scaling method was in previous versions).
After changing scaling method reload a portal from menu, however I'd recommend to close and restart the app.

Download links:
Free version
ARMv7a

Code:

https://mega.nz/#!VIRC0bCD!dg0HbOxNYMyREmqzouzpLCMf6MVxpTHAakuw3t14zbk

x86

Code:

https://mega.nz/#!sdpEiYjY!-2VSDkkcYMDWPnvUD4osM5LKDELJXUKymFbtQxzF8wc

NFPS
ARMv7a

Code:

https://mega.nz/#!EJgABQpI!OkDCkDfxVzSOviv6rkjJrbFeEPnth_ztxlBlKqNWLgU

x86

Code:

https://mega.nz/#!dMBDGBSL!eFJvGuz--pvPhIzcBIfVIuUg9XDLMC0H69U5jhC8HuU

Rocket
ARMv7a

Code:

https://mega.nz/#!oJJwjQhC!toWoI-TI2Oft4Gc4lYqlD6QA9WC3aWM1us0hbsAKSHM

x86

Code:

https://mega.nz/#!McJWxRiY!GvGqWDpg1YWJFUgPBagLzDByha6ndkSQoF_4YlPAHYY

Iptv66
ARMv7a

Code:

https://mega.nz/#!wUxXnIJK!h2jkIrFGv1yZpBw7wBw-zMF7KRNozP70yi1YrQFwzxA

x86

Code:

https://mega.nz/#!lJw0mYrS!mRuQYvUkaxfZrlQeoW2d5inQdQvMn4_gNOoNtw6C0LU

mvas · Feb 3, 2016

New Release 0.7.11

v.0.7.11
* Fixed Internal player and Exo player don't play some streams.
* Added a configuration option to change browser scaling mode if portal is too big or too small.
* Fixed some crashes.

I didn't find a correct way to make portals look good on all devices, so there's a new configuration option "Scaling method" in Common settings->Browser settings. By default most high resolution devices should use "Default" method. But if portal is too big try to change to "Alternative 1" (usually on devices with a low display resolution (less than portal resolution, 1280x720)). If this still doesn't work change to "Alternative 2" (this scaling method was in previous versions).
After changing scaling method reload a portal from menu, however I'd recommend to close and restart the app.

Download links:
Free version
ARMv7a

Code:

https://mega.nz/#!VIRC0bCD!dg0HbOxNYMyREmqzouzpLCMf6MVxpTHAakuw3t14zbk

x86

Code:

https://mega.nz/#!sdpEiYjY!-2VSDkkcYMDWPnvUD4osM5LKDELJXUKymFbtQxzF8wc

NFPS
ARMv7a

Code:

https://mega.nz/#!EJgABQpI!OkDCkDfxVzSOviv6rkjJrbFeEPnth_ztxlBlKqNWLgU

x86

Code:

https://mega.nz/#!dMBDGBSL!eFJvGuz--pvPhIzcBIfVIuUg9XDLMC0H69U5jhC8HuU

Rocket
ARMv7a

Code:

https://mega.nz/#!oJJwjQhC!toWoI-TI2Oft4Gc4lYqlD6QA9WC3aWM1us0hbsAKSHM

x86

Code:

https://mega.nz/#!McJWxRiY!GvGqWDpg1YWJFUgPBagLzDByha6ndkSQoF_4YlPAHYY

Iptv66
ARMv7a

Code:

https://mega.nz/#!wUxXnIJK!h2jkIrFGv1yZpBw7wBw-zMF7KRNozP70yi1YrQFwzxA

x86

Code:

https://mega.nz/#!lJw0mYrS!mRuQYvUkaxfZrlQeoW2d5inQdQvMn4_gNOoNtw6C0LU

ftawizzards · Feb 3, 2016

mvas said:
v.0.7.11
* Fixed Internal player and Exo player don't play some streams.
* Added a configuration option to change browser scaling mode if portal is too big or too small.
* Fixed some crashes.

I didn't find a correct way to make portals look good on all devices, so there's a new configuration option "Scaling method" in Common settings->Browser settings. By default most high resolution devices should use "Default" method. But if portal is too big try to change to "Alternative 1" (usually on devices with a low display resolution (less than portal resolution, 1280x720)). If this still doesn't work change to "Alternative 2" (this scaling method was in previous versions).
After changing scaling method reload a portal from menu, however I'd recommend to close and restart the app.

------------------------------------------------------------------------------------------------------------------------------------------------
thanks
- noticed the update flash on screen when loading app (had already logged out since i was getting the black screen after scrolling through some channels) but this change would NOT take effect until reboot..

thing is, i also had to go into settings of the player itself (before said update) and changed the resolution since 1280x720 was too big and there was ONLY one option in there (forget the size or the player i was on)funny though it rebooted my android box instead of the app (emuird) itself

anyways so,

what player will load when i log back in? and/or will users have a choice what player they want to use going forward
or not?

Switchon · Feb 3, 2016

Used all players in default site setup and the update looks great at fixing all the issues with miss sized menus and external player setup on MXIII Android box
.. great job "mvas".

When I say default site I mean the default googleplay setup in the APK .. NOT any of the IPTV sites supported here!!!

longodongo · Feb 3, 2016

on rocket arm for android version,can only access login to input codes,and goes straight down to ok,ignoring password,so i get an error

OverrRyde · Feb 3, 2016

Quick question: How do i make the user/pass prompt come back? I find i have to reinstall the apk on android to make it come back. Now the reason why i need this is because it has a default MAC address in there that needs to be changed to my current one, however, once i change it and i reload/restart the emu, i get "contact provider" error and no longer get the user/pass prompt unless i reinstall the app again.. Vicious circle!

Any idea?

longodongo · Feb 3, 2016

why don't you enter all the other info first then put in your user pass?

OverrRyde · Feb 3, 2016

thanks longodongo, actually did not think about that!

However, i just tried once last time to be sure and if i change the MAC in the setting, i actually have to exit the emu after getting the "contact provider" error, reopen it and then the prompt comes back!

I guess just have to wait now for MAC changer to come back so i can change my MAC # - for some weird reason tge MAC i had linked changed from yesterday to today.

generica · Feb 3, 2016

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

big dady · Feb 3, 2016

It will only show error if you don't put your correct donation number

atlas1321 · Feb 3, 2016

question. does the rocket version not have ads? thanks

dara · Feb 3, 2016

atlas1321 said:
question. does the rocket version not have ads? thanks

The customized versions should not have ads.

	IPTV StbEmu Release v.0.6.01 Help? Smoker Apr 8, 2015 IPTV STB Emulators
G	IPTV Roku Emulation Rocket, NFPS and iptv66 suport Jun 21, 2017 IPTV STB Emulators
	Android IPTV STB Emulator freetocan Nov 25, 2017 IPTV STB Emulators
A	IPTV New stalker emulator?? August 2016 crazed 9.6 Feb 14, 2017 IPTV STB Emulators

IPTV StbEmu Release thread - All Versions

New member

New member

Banned

tux tux tux

New member

tux tux tux

New member

New member

emu

emu

New member

New member

New member

New member

New member

New member

TV Addicted

Moderator at Work

New member

Fire From Within

BEST IPTV SERVICE

50% OFF ON ENTIRE ORDER