Kodi Version 16 and above PVR Stalker Client Setup Instructions for NFPS Server
Kodi Version 16 and above PVR Stalker Client Setup Instructions
Get the most recent version of Kodi from the Playstore (Android) or
for any Platform here -> hxxps://kodi.tv/download/
* (All I/P Addresses shown as hxxp or hxxps, replace with http or https -(No Live Links Rule))
-Install and run Kodi
-Go to System Settings/Add Ons/My Add Ons/PVR Clients/Stalker Client.
***Note
The KODI Settings screen has 4 levels of access, located at the bottom left of the screen. To access all required settings, click the Tab until “Advanced" or "Expert” level is indicated.
-Select Configure
-Set Portal 1 and Connection timeout to 120
-Enter your MAC#
Format Example( 00:1A:78:xx:xx:xx ) Replace the x’s, with your last digits from your STB’s MAC# or your PC /Apple/RasPi/Fire/DL-T/etc. MAC# …or
make up a random number in HEX from 00 to FF (Example: 2A:B9:43)
-Leave the Time Zone as is.
-Enter your Server Address (Info located from your donation information at Papiao
here -> hxxps://papiao.is/main/search_nfps
*** Note Kodi 16 doesn't handle URL forwarding
- For NFPS,
If the server is 1.iptvprivateserver.tv then you would use hxxp://portal1.iptvprivateserver.tv/stalker_portal/c/index.html
If the server is 5.iptvprivateserver.tv then you would use hxxp://portal5.iptvprivateserver.tv/stalker_portal/c/index.html
etc.
-Enter your Login & Password
(Login & Password both require your donation#)
-Enter a random Serial Number - should be a minimum 13 digit number (I use 6 numbers/1 Letter/ 6 numbers)
-Enter a random Device ID - Should be a minimum 12 digit number (I use numbers only)
*(Token/Device ID2/Signature should be blank (at this time they are redundant fields))
EPG info:
-Set to Prefer XMLTV
Remote URL:
URL Address :
hxxp://nfps.**********
Save your settings by clicking OK, then Enable Stalker by clicking “Enable”.
* You Must now go to Papiao Site and "Associate" your MAC# you entered above, with your Donation#.
Once you have done that...
Go back to Settings/TV - General Tab
-There are 3 settings regarding using Channel Numbers and Groups and Sync from the Back End. Enable all 3.
-Then Select "Enable".
Kodi should now attempt to connect. A message window in the top right corner of the screen will appear.
It will say "Loading Channels from Clients (if successful, Kodi will Include a "TV" Icon on the Menu Bar)
It will then Attempt to load the Guide. Let the system load everything before you attempt to watch TV.
If there is a problem, (Error Message at bottom right of Screen), Shut down and Restart KODI.
If you still have problems, post your results.
FYI - IPTV Reset is used to clear Device ID Information stored in the server ONLY.
You can only do this twice in a 24hr. period, so dont over use this function to try to correct a problem unrelated to your Dev ID1 Information.
(Next time you connect, it records the Device id you have entered in your configuration settings).
Good Luck and Happy Viewing
/kens
