For all those running Kodi and Stalker Client.

[Hank Venture]

OK all fixed. Issue is new serial numbers needed. Found a fix. Thanks dafatmack. For all those running Kodi and Stalker Client.

1. Get a new Mac Address from server.
2. Go into Kodi and turn off Live TV, and clear data. (I always clear two times to make sure.)

Go into system, addons, PVR clients, and disable Stalker Client.

Go in and configure Stalker Client, and make these changes.

1. Change Mac Address to new one.
2. Make up and enter Serial number: any 13 digits
3. Make up and enter Device ID: any 4 or more digits or letters - I used my device name
4. Make up and enter Device ID2: any 4 or more digits or letters- I used my 2nd devices name (phone)
5. Make up and enter Signature: any 4 or more digits or letters- I made up something special to me

Enable stalker client 0.8.3.

Go back and turn Live TV on. I needed to do this 2 times.

Now you are up to par with the new security. If you use your Mac address for more than one device all info must be entered the exact same. Remember to never use the two devices at the same time.

[theone]

Made as a sticky, thanks for all your help.

[nelsonlfs]

thanks, up and running flawless with a crappy internet :D btw i never changed mac, should i change it even if its working?

[Hank Venture]

No, if it isn't broke don't fix it. If it worked for you your Mac Address was updated with the new security. You should be ok.

[dafatmack]

Why wasn't mines sticky'd? just kidding glad I could help

[Standen1986]

Does this mean max 2 devices per MAC address? I use mine on Amazon Fire Stick, Laptop & Phone at the moment. Never using more than 1 at a time though.

[Desiguy1981]

can someone plz tell me how to turn off live tv and clear dada?

[Standen1986]

can someone plz tell me how to turn off live tv and clear dada?

System>Settings>TV then on the right hand side push the select button on 'Enable' so that there is no blue light then at the bottom of that same menu is the 'Clear Data option'

[SCLINE74]

Worked like a champ. Glad they are getting more secure. Maybe just me but it seems a lot faster loading and no freezing

[Backup]

OK all fixed. Issue is new serial numbers needed. Found a fix. Thanks dafatmack. For all those running Kodi and Stalker Client.

1. Get a new Mac Address from server.
2. Go into Kodi and turn off Live TV, and clear data. (I always clear two times to make sure.)

Go into system, addons, PVR clients, and disable Stalker Client.

Go in and configure Stalker Client, and make these changes.

1. Change Mac Address to new one.
2. Make up and enter Serial number: any 13 digits
3. Make up and enter Device ID: any 4 or more digits or letters - I used my device name
4. Make up and enter Device ID2: any 4 or more digits or letters- I used my 2nd devices name (phone)
5. Make up and enter Signature: any 4 or more digits or letters- I made up something special to me

Enable stalker client 0.8.3.

Go back and turn Live TV on. I needed to do this 2 times.

Now you are up to par with the new security. If you use your Mac address for more than one device all info must be entered the exact same. Remember to never use the two devices at the same time.

This Did not work for me......

[vicrattlehea]

tells me unable to load channels

[blove]

Hank, which kodi add on version and pvr version are you using?

[vicrattlehea]

stalker client 0.8.3 is what he is using
and more then likely Kodi 15

[trojanman]

Same issue

[irish girl]

In pvr stalker hit enable
Few times takes 3 times before loads

[SCLINE74]

Did you cycle the TV enable button twice. I had to do that on my windows machine

[vicrattlehea]

tried it many times still same thing unable to load channels

[SCLINE74]

Did you change your mac address using your donation number

[vicrattlehea]

yes i changed my mac and after it didn't work i changed it back to the first mac i had same thing

[vicrattlehea]

i see another post with the same thing the coincidence is the other person who posted is also canadian

[SCLINE74]

i see another post with the same thing the coincidence is the other person who posted is also canadian

Are you thinking your ISP is blocking. Would be hard to believe being it was working I assume before these changes.

[vicrattlehea]

no it was working fine i am following the other thread also seems i am not the only one

[kuthedude]

I too am having the same issue. Tried this multiple times.

[irish girl]

Working in to

[getochkn]

I installed the video stalker client first the 9.0.21 version that allows serials and then with another fresh mac connected and then I set 0.83 pvr client and all was fine. Did 4 kodi machines in my house from Canada.

MYbe installing the video plugin and connecting first deletes something I dunno but it seemed on the first two machines I was having trouble starting on the pvr. Once I went to the plugin first they were all smooth as butter.

[Hammerhead]

I've been working on mine for a couple hours still can't get it going but my kodi updated today and I'm running stalker client 0.8.4 could that be the problem

[DarkSide]

I've been working on mine for a couple hours still can't get it going but my kodi updated today and I'm running stalker client 0.8.4 could that be the problem

working here with that version... i was only able to make it work using a combo of numbers and letters for the device id's and the signature

[kuthedude]

I installed the video stalker client first the 9.0.21 version that allows serials and then with another fresh mac connected and then I set 0.83 pvr client and all was fine. Did 4 kodi machines in my house from Canada.

MYbe installing the video plugin and connecting first deletes something I dunno but it seemed on the first two machines I was having trouble starting on the pvr. Once I went to the plugin first they were all smooth as butter.

I tried this too. Still unable to load.

[Hammerhead]

working here with that version... i was only able to make it work using a combo of numbers and letters for the device id's and the signatureThank you went back and added letters and numbers and is now working

[Mikezmilano1]

Working just fine on 0.8.4 here. Followed directions to the letter, used my drivers license number for the 13 digit serial, then 2 four digit numbers, then for signature I just combined the 2 four digit sets so that I can remember everything without having to write it down :) thanks for your hard work!!

[apun]

OK all fixed. Issue is new serial numbers needed. Found a fix. Thanks dafatmack. For all those running Kodi and Stalker Client.

1. Get a new Mac Address from server.
2. Go into Kodi and turn off Live TV, and clear data. (I always clear two times to make sure.)

Go into system, addons, PVR clients, and disable Stalker Client.

Go in and configure Stalker Client, and make these changes.

1. Change Mac Address to new one.
2. Make up and enter Serial number: any 13 digits
3. Make up and enter Device ID: any 4 or more digits or letters - I used my device name
4. Make up and enter Device ID2: any 4 or more digits or letters- I used my 2nd devices name (phone)
5. Make up and enter Signature: any 4 or more digits or letters- I made up something special to me

Enable stalker client 0.8.3.

Go back and turn Live TV on. I needed to do this 2 times.

Now you are up to par with the new security. If you use your Mac address for more than one device all info must be entered the exact same. Remember to never use the two devices at the same time.

This finally worked for me, changing MAC is the key and Enabling/Disabling TV more than 2 times is also very important, first time you enable it it will say "unable to load channels" but second or third time it will finally load all channels :D thanks

[Backup]

This Did not work for me......

I got it by putting in what Hank said to do
serial#
device id
device id2
signature
all made up but my MAC
went to papy and changed mac by 1# then back to original MAC
but its working..
got me shaking my head.stalker client running real ruff though...

[dexquisite1]

Working just fine on 0.8.4 here. Followed directions to the letter, used my drivers license number for the 13 digit serial, then 2 four digit numbers, then for signature I just combined the 2 four digit sets so that I can remember everything without having to write it down :) thanks for your hard work!!

Nothing was working for me. I finally tried your method and it worked like a charm. Thank you!

[Aids10]

This finally worked for me, changing MAC is the key and Enabling/Disabling TV more than 2 times is also very important, first time you enable it it will say "unable to load channels" but second or third time it will finally load all channels :D thanks

Thanks M8 :D

To confirm;

-*Must use Both numbers & letters for Advanced Settings*-

Changed my MAC Address with Private Server

Disabled TV & PVR Client

L33T3D my Settings with Both Numbers & Letters, and updated MAC

Enabled PVR Client

Enabled TV- still get same channel load error

Disable/Enable once more and now All Working!!!

[PayPerView]

I have followed the instructions to a Tee and I keep getting "Authentication Failed". I have changed my MAC with private server several times; each time I get the successfully changed message in green and still get Authentication Failed. Entered both letters and numbers in the serial and ID's and still get Authentication Failed. I give up, they make it to difficult.

[Soundwav]

Kodi 15.2 this method does not work for me after hours of trying various methods!
ivue works to a point... (no VOD and no international) ,i get unable to load channels using this method

EDIT!!!!

finally got it working properly

turns out for me it was the server i had.......
http://66.iptv66.tv worked for me
i was using mw1.iptv66.tv that no longer works for me with all the new changes being made!

[irish girl]

Not need to load both iptv stalker and pvr client just use one
I prefer pvr client

[andre3030]

Thanks!

Got it working with the Stalker Client (0.8.3).
Coming from Stalker Client NFPS and earlier IPTV Stalker video add-on.

Now my favorites don't work with this client, not a huge problem but this will be the third time I need to add them.
If I enable another client can my favorites work or will it crash?

[Alucard]

Thanks!

Got it working with the Stalker Client (0.8.3).
Coming from Stalker Client NFPS and earlier IPTV Stalker video add-on.

Now my favorites don't work with this client, not a huge problem but this will be the third time I need to add them.
If I enable another client can my favorites work or will it crash?

Use groups not favorites. just make sure you disable the group sync with back end under the Live TV Settings. You can use this app here to help you manage all your channels and groups by using a template. http://iptvtalk.net/showthread.php?8634-Kodi-PVR-Channel-Template-Loader

[andre3030]

Use groups not favorites. just make sure you disable the group sync with back end under the Live TV Settings. You can use this app here to help you manage all your channels and groups by using a template. http://iptvtalk.net/showthread.php?8634-Kodi-PVR-Channel-Template-Loader

Great tips.
But it seems like Windows only.
Anything similar I can do from my mac?

My setup with the Stalker Client is OSMC OS on Raspberry Pi2.

[Standen1986]

Does it matter what server address you use?

[dara]

Does it matter what server address you use?

See the tutorials on what server address you use for IPTV Stalker or PVR Stalker. It does matter. In the future for Kodi 16, there will be a change in the server address.

[Onechop]

Have done every thing by the book and can see channels load ect but cant see the app to click on it am using wookie retro build.

[dara]

Have done every thing by the book and can see channels load ect but cant see the app to click on it am using wookie retro build.


I don't know what that build will have as the default PVR client, but look in the PVR Clients in My add-ons, in the Add-on settings in System.

[Onechop]

Its the 0.8.3 build mate and all looks like its working just can't find anything to click on the main screen, iptv,live tv ,tv and can't find it anywhere

[dara]

Onechop, what skin does Wookie use? All my recommendations are based on the default Confluence. If you aren't seeing the TV icon/button on the main screen, your skin appearance settings may be set that way

[Onechop]

Am using the retro skin will try another one see if I have any luck,thanks for your help anyway.

[kdawg64]

Thanks Hank Venture, worked flawless, I kept my Mac the same thou.

[dh8389]

From what I have encountered you may have to change mac. Just swap a couple digits around and try. I also made a video (Cheers Dara)


https://www.youtube.com/watch?v=AWCys8V_E9c

[skyhawk10]

I have a couple of questions/

1. Currently using IPTV Stalker but would prefer to use Stalker Client. Therefore should my first step be to disable or uninstall IPTV Stalker?

2. The first step in the instructions "1. Get a new Mac Address from server.", where is that referred server?

[Alucard]

You don't have to disable IPTV Stalker. Just make sure all your fields match in the PVR Client before you enable it. If it is enabled, disable it, make your changes and then enable. Then toggle/enable Live TV.

Now if you only have the send serial enabled without a custom mac then you will need to reset your MAC and set a custom MAC.

[eureka]

I have a couple of questions/

1. Currently using IPTV Stalker but would prefer to use Stalker Client. Therefore should my first step be to disable or uninstall IPTV Stalker?

2. The first step in the instructions "1. Get a new Mac Address from server.", where is that referred server?

1. There would be no need to disable it if you have configured it with the new credentials & it is working, although disabling or uninstalling it would do no harm & possibly rule out any possible confliction errors in the event that you're trying to troubleshoot down the line. It's just one less thing to worry about, but not totally necessary. The chances are that you'd have no need for it anyway if you intend to use the built in live tv feature in conjunction with the PVR client.

2. One of the following (depending on your donation):


NFPS: https://papiao.is/main/search_nfps
Rocket: https://papiao.is/main/search_rocket/
IPTV66: https://iks66.tv/main/search


Enter your route/donation number (your route number is at the bottom of your email under Username & Password), complete captcha challenge & search. Then change MAC (use format 00:1A:78:XX:XX:XX) You can replace the X's with the last six digits of your android box or you can generate a new MAC by going here:

http://www.miniwebtool.com/mac-address-generator/
In the 'MAC address prefix' field type 00:1A:78
In the 'MAC address format' field click the dropdown arrow & choose the second option (the one with the colons)
Click 'Generate MAC Address'

Use that as your MAC address when linking to your route/donation. If you get an error just change a digit or two until it's accepted.

[skyhawk10]

wow...you guys are the best!

Thanks to your help and guidance I finally got the Stalker Client working.

In the video I noticed that there is information displayed for the current TV program on each channel. How can I get that same info working on Stalker Client?


I found how to display the EPG info...in the configuration of Stalker Client I changed the Guide Preference to Prefer XMLTV.

[andre3030]

wow...you guys are the best!

Thanks to your help and guidance I finally got the Stalker Client working.

In the video I noticed that there is information displayed for the current TV program on each channel. How can I get that same info working on Stalker Client?


I found how to display the EPG info...in the configuration of Stalker Client I changed the Guide Preference to Prefer XMLTV.

Yes ,it's working and it's just great!
One thing I've noticed with the Stalker client I'm using is that I can't fast-forward on PPV channels.
Just a detail, not that important.

[Duggy2.0]

Its not working.

[Alucard]

Its not working.

Well you know it might help if you explain what the issue is and what you are trying to use.

[Stavman]

Well I got mine to work with the info provided but it still freezes, even more now then before, but it's working! Thank you all for the info. Is there anything we can do for the buffering/freezing?

[duhhud]

this worked like a charm.thank you

[Hustler]

OK all fixed. Issue is new serial numbers needed. Found a fix. Thanks dafatmack. For all those running Kodi and Stalker Client.

1. Get a new Mac Address from server.
2. Go into Kodi and turn off Live TV, and clear data. (I always clear two times to make sure.)

Go into system, addons, PVR clients, and disable Stalker Client.

Go in and configure Stalker Client, and make these changes.

1. Change Mac Address to new one.
2. Make up and enter Serial number: any 13 digits
3. Make up and enter Device ID: any 4 or more digits or letters - I used my device name
4. Make up and enter Device ID2: any 4 or more digits or letters- I used my 2nd devices name (phone)
5. Make up and enter Signature: any 4 or more digits or letters- I made up something special to me

Enable stalker client 0.8.3.

Go back and turn Live TV on. I needed to do this 2 times.

Now you are up to par with the new security. If you use your Mac address for more than one device all info must be entered the exact same. Remember to never use the two devices at the same time.

I have tried this a number of times but keep getting "Failed to load channels". Anyone have any ideas? Have been trying to sort this out for over a week now.

Here's my Kodi log:


17:44:40 T:1869633416 ERROR: PVR - PVR_ERROR PVR::CPVRClient::GetChannels(PVR::CPVRChannelGroup&, bool) - addon 'Stalker Middleware:http://11.iptvrocket.tv/' returned an error: server error
17:44:40 T:1869633416 ERROR: PVR - PVR_ERROR PVR::CPVRClients::GetChannels(PVR::CPVRChannelGrou pInternal*) - cannot get channels from client '1801': server error
17:44:40 T:1869633416 ERROR: PVRChannelGroup - virtual bool PVR::CPVRChannelGroup::Load() - failed to update channels
17:44:40 T:1869633416 ERROR: PVRChannelGroupInternal - virtual bool PVR::CPVRChannelGroupInternal::Load() - failed to load channels
17:44:40 T:1869633416 ERROR: PVR - bool PVR::CPVRChannelGroups::Load() - failed to load channels
17:44:40 T:1869633416 ERROR: PVRManager - virtual void PVR::CPVRManager::Process() - failed to load PVR data, retrying


Using the default Stalker Client that comes preinstalled with Kodi (v. 0.8.3)

Any help would be appreciated.

Thanks

[lopeztiti]

good thank u

[SuperKing]

I have tried this a number of times but keep getting "Failed to load channels". Anyone have any ideas? Have been trying to sort this out for over a week now.

Here's my Kodi log:



Using the default Stalker Client that comes preinstalled with Kodi (v. 0.8.3)

Any help would be appreciated.

Thanks

Same here. Except I'm running 0.8.4

[mpvguy]

Same here. Except I'm running 0.8.4

I am having the same error after following the steps changing mac, inputting serial, device and signature. I even change the mac to one that I just generated and it is still getting
"unable to load channels". I am running Stalker Client 8.2 , i guess it will not help even if I upgrade to 8.3. Appreciate if you can help, thanks.

[anilkuj]

I Tried all the instructions to the word no luck :( , i took the same serial , Device Ids and Signature and used in in IPTV Stalker video addon everything works fine

just can't seem to get it working with the PVS stalker client both with 0.8.4 and 0.8.4 also tried 0.9.7 froom Github same issue

i am at my wits end , any help appreciated

[Autoroam]

I am having the same error after following the steps changing mac, inputting serial, device and signature. I even change the mac to one that I just generated and it is still getting
"unable to load channels". I am running Stalker Client 8.2 , i guess it will not help even if I upgrade to 8.3. Appreciate if you can help, thanks.

Back out from the tv settings page to the home page of Kodi and use that power button on the bottom left corner to exit…..I did that and when I re-entered kodi….the guides and channels loaded up.

No harm trying.

[zdcyclops]

I have tried this on top set up Stalker Client Kodi 15.0 - 16.0 as out lined by Hank Venture "1. Get a new Mac Address from server.
2. Go into Kodi and turn off Live TV, and clear data. (I always clear two times to make sure.)

Go into system, addons, PVR clients, and disable Stalker Client.

Go in and configure Stalker Client, and make these changes.

1. Change Mac Address to new one.
2. Make up and enter Serial number: any 13 digits
3. Make up and enter Device ID: any 4 or more digits or letters - I used my device name
4. Make up and enter Device ID2: any 4 or more digits or letters- I used my 2nd devices name (phone)
5. Make up and enter Signature: any 4 or more digits or letters- I made up something special to me

Enable stalker client 0.8.3." all returned Unable to load channels except Jasper it says couldn't connect to server.
The IPTV Stalker addon works fine but NOT the Stalker Client. I don't know why this fails for me I have tried it on fresh installs of Kodi no go I have reset Stalker to defaults no go I have deleted stalker settings.xml no go. I have tried different versions of Stalker Client DL'd from git hub NO GO.... I'm beginning to think I have offended the TV Gods I really think it would be in the best interests that run the servers to insure that the between 2-3 million people that use Kodi have the ability to connect to their servers via a client that provides an EPG. It is
not a pleasant viewing experience to have a boat load of channels and not know what is on. If anyone can point me to a solution that would great. If I can't have a guide I see no reason to continue with a subscription to the service. Thanks

[Alucard]

If your running the 8.0.3 version, you need to go manually in to the settings.xml and change your timeout. There is an issue with this version in setting the timeout from the interface.

Close Kodi
Go to C:\Users\<LOGIN>\AppData\Roaming\Kodi\userdata\add on_data\pvr.stalker on Windows or
/sdcard/Android/data/org.xbmc.kodi/files/.kodi/userdata/addon_data/pvr.stalker on Android and open the settings.xml and
insure the connection_timeout value is at 60 and then save the changes.

Restart Kodi and try again.

[Autoroam]

If your running the 8.0.3 version, you need to go manually in to the settings.xml and change your timeout. There is an issue with this version in setting the timeout from the interface.

Close Kodi
Go to C:\Users\<LOGIN>\AppData\Roaming\Kodi\userdata\add on_data\pvr.stalker on Windows or
/sdcard/Android/data/org.xbmc.kodi/files/.kodi/userdata/addon_data/pvr.stalker on Android and open the settings.xml and
insure the connection_timeout value is at 60 and then save the changes.

Restart Kodi and try again.


Im not on 0.8.3 but 0.8.4 but i checked out what you said….somehow on 0.8.4 the max timeout you can set (on config page as well as in advanced settings xml file) is 15 sec.

[Pdesroch]

Im using Kodi 15 on PC ive done the steps many times and continue to get authentication failures and also a device id conflict error, ive reset my mac multiple times. The errors happen when i try to load live tv or launch stalker client NFPS. Everything runs fine if i simply load IPTV Stalker as a video addon, i would love get the guide and EPG back with PVR stalker nfps, thanks.

[Bkman2020]

So far what works is the video addon

[DarkSide]

Im using Kodi 15 on PC ive done the steps many times and continue to get authentication failures and also a device id conflict error, ive reset my mac multiple times. The errors happen when i try to load live tv or launch stalker client NFPS. Everything runs fine if i simply load IPTV Stalker as a video addon, i would love get the guide and EPG back with PVR stalker nfps, thanks.

use the version that comes with kodi 15.2.. version 0.8.4 is working

[Alucard]

If your having trouble. Choose ether the Stalker Video Client or The PVR Client and not both and start from scratch. Which ever one you don't use, disable that add on. If your using an android device, clear the cache for kodi.

[sjordash]

When you say "The PVR Client" do you mean PVR IPTV Simple Client?

[dara]

When you say "The PVR Client" do you mean PVR IPTV Simple Client?

He means the "Stalker Client" or pvr.stalker

[Pdesroch]

Working great now thanks very much.

[zdcyclops]

Hi all I had the PVR Stalker Client working on Isengard 15.2 I followed Alucards post and after many tries achieved EPG Nirvahana LOL, but i must have offended the TV gods because it returned to "Unable to load channels" with no changes on my end. Since then I have tried resetting my MAC several times first checking with the MAC checker to verify that the MAC was open. I have not been able to get the PVR Stalker Client to work. For trouble shooting I have uninstalled Kodi and reset my MAC reinstalled Kodi setup the Stalker Client from a .txt file with addresses CP from setup of the MAC on the server, serial,ID's and signature from a random alphanumeric generator CP to the txt file to and server and epg addy's from posts to eliminate typo errors. Still UTLC. Switched to Kodi Jasper 16 beta 3 and used procedure from above to setup Stalker Client get Failed to connect to server. I used the same info as was entered into the Stalker Client to setup IPVTV Stalker 9.0.21 and the server accepts data from that source. I also noticed that Kodi 15.2 is unstable on my Windows 10 box, when trying to setup Stalker Client 15.2 would shut my PC, Jasper does not exhibit this behavior.

[BTG_Tiger]

Use either PVR stalker client or IPTV stalker.... using both creates nothing but freaking headaches.

[zdcyclops]

Using only Stalker Client I used IPTV Stalker to verify that the MAC I had linked worked then disabled IPTV Stalker and switched to the Stalker Client which I finally got to work. I am using the latest version of Kodi and the 9.0.7 of the stalker doesn't handle the server address right. I found an address that does work on a thread by dara hxxp://portal.iptvprivateserver.tv/stalker_portal/c/index.html people with problems might give this address a try.

[BOSCO]

I could use some help because I had this running at one time until I tried to run it on my Nook with a Chrome cast Now neither my computer or the Nook (well it never worked) are working
Unable to load channels is the error message I get
I tried to uninstall and I did everything like this post suggest except I am runniing 8.4 Stalker on my pc So I don't get the password s/n or anything like that. 11iptvrocket with my mac and its been linked Some confusion again on weather it should be 79 or 78 in the Mac address But Ive tried booth without success...

[K00lKatT]

no confusion, it's clearly stated to use 78...

[Cableguy25]

Where do I get the mac from. On rocket server it shows all zeros for my mac address

[psycon]

here you get your mac from here http://www.hellion.org.uk/cgi-bin/randmac.pl?scope=global&oui=00%3A1A%3A78&type=multicast

[bodasefus]

I did a fresh install downloaded the latest version of Kodi and installed... This gave me stalker client 0.8.4... I could not get a load on channel list and no guide... Had to revert back to 15.0 and now all works fine...

[Cableguy25]

I keep getting this error Mac Address Could not be Updated when I try to upload my generated mac address on the web site, and do you have to use numbers like 25:25 with colons for your serial and product ID numbers?

[big dady]

The colons are for your mac address only.. For mac are you using 00:1A:78:XX:XX:XX format?

[Cableguy25]

yes that's my format but it will not upload

[Mrjoeyloke]

Ok guys I'm completely lost here! I purchased through iptv rocket, got a order email, checked the order on their website. It says the donation has been assigned, I'm trying to get this running on kodi isengard. What the heck is my mac address as is not clearly stated!?! Is there any place for cut clear instructions? You'd think after you'd pay you'd at least get that! Lol

[eureka]

Ok guys I'm completely lost here! I purchased through iptv rocket, got a order email, checked the order on their website. It says the donation has been assigned, I'm trying to get this running on kodi isengard. What the heck is my mac address as is not clearly stated!?! Is there any place for cut clear instructions? You'd think after you'd pay you'd at least get that! Lol
Read this: http://iptvtalk.net/iptv-how-to-setup.pdf

On Kodi homepage under System choose System, System Info, then scroll down to Network. Your MAC address is there. Use the last six digits & add them to 00:1A:78 Use that as your MAC & link it to your donation. You don't have to use those last six digits, you can generate one using the link in post #81 above. The important thing is to have your MAC in hexadecimal format 00:1A:78:XX:XX:XX

Then read this: http://iptvtalk.net/showthread.php?10406-FAQ-Which-Kodi-Add-ons-do-I-need-for-NFPS-Rocket-and-66-IPTV&p=83694#post83694