Stalker Client working now!

[dafatmack]

Finally!!!! I manged to get Stalker client back working, Kodi addons require Serial Numbers now which is a good thing maybe it'll stop all the hi jacking.

What I did was the following

Serial number: any 13 digits

Device ID: any 4 or more digits/I did 4 digits

Device ID2: any 4 or more digits/I did 4 digits

Signature: any 4 or more digits/ I did 4 digits. I don't know if the signature has to be digits or can it be Alphabetical characters but I used 4 digits for my signature.

Disable then enable stalker client 0.8.3 I'd it fails then disable then enable again until it loads.

*Must have a fresh mac.
*Each mac you use must have it's own Serial numbers and device ID's

*Update*
I read that your device ID's can be alphabetical characters like a name or something so I'm assuming so can the signature.

[irish girl]

Thks worked for me but never changed mac number

[1desi]

its not working for me. I tried just like you said. no go

[irish girl]

Do exactly as posted

Don't know what no go
Meant

[1desi]

well it's mean it did not work. I tried as it is posted. Thanks for the help anyway

[irish girl]

You need to enable stalker client few times untill it loads

[dafatmack]

Try changing the last digit on your mac then try again because this method definitely works

[irish girl]

Changed last digit and that seems to have stopped buffering

Plus mac was updated successfully

[irish girl]

So am I right change last number on mac address and do same on mac donation so confused at this point

Had it running but experience buffering

[dafatmack]

Irish girl I wasn't talk'n to you I was talk'n to 1desi I'm sorry

[irish girl]

Oh you don't like girls then just trying to figure this out about changing last number or not

[dafatmack]

Lol, the guy said it wasn't working thats why I told him to try changing the last digit of his mac. If yours was working there was no need to change it

[nelsonlfs]

this works on 0.8.4?

[dafatmack]

@Nelsonlfs not sure cause I've always been on "0.8.3" you can try it and come back and let us know if you don't mind

[KayKay]

Finally!!!! I manged to get Stalker client back working, Kodi addons require Serial Numbers now which is a good thing maybe it'll stop all the hi jacking.

What I did was the following

Serial number: any 13 digits

Device ID: any 4 or more digits/I did 4 digits

Device ID2: any 4 or more digits/I did 4 digits

Signature: any 4 or more digits/ I did 4 digits. I don't know if the signature has to be digits or can it be Alphabetical characters but I used 4 digits for my signature.

Disable then enable stalker client 0.8.3 I'd it fails then disable then enable again until it loads.

*Must have a fresh mac.
*Each mac you use must have it's own Serial numbers and device ID's

*Update*
I read that your device ID's can be alphabetical characters like a name or something so I'm assuming so can the signature.

Do I have to enter these same settings on PVR Stalker Client and Custom Serial in IPTV Stalker App?? Or just enter in PVR Stalker Client and under IPTV Stalker App enable the Send Serial Number without custom serial number??

[hunter0506]

Many thanks sorted a problem my parents where having with there android box

[irish girl]

Just put settings into stalker client no need to have iptv stalker
As well

[bcmiguel]

Hi I just imputed info into serial number and device ID (made up a 13 character alpha numeric for serial), left others blank and it worked for me

[KayKay]

Just put settings into stalker client no need to have iptv stalker
As well

I tried with the settings in PVR Stalker Client alone with Stalker App Send Serial and Custom serial Disabled and I still get unable to load channels. When I have the Custom serial enabled I can freely watch the Channels as long as I select the channels through the Stalker App. But I cant load Channels through PVR Stalker Client. What am I doing wrong here?

[irish girl]

Enable live tv
Or

Enable disable pvr stalker client fewvtimes

[dara]

I tried with the settings in PVR Stalker Client alone with Stalker App Send Serial and Custom serial Disabled and I still get unable to load channels. When I have the Custom serial enabled I can freely watch the Channels as long as I select the channels through the Stalker App. But I cant load Channels through PVR Stalker Client. What am I doing wrong here?

You need to have the same settings in both IPTV Stalker and PVR Stalker ("Stalker Client") to have both work. In IPTV Stalker to reveal the fields, you need to have "Send Serial Number" and "Custom Serial" on, and use the identical settings in Serial Number, Device ID, Device ID2 and Signature, in Advanced in "Stalker Client". You probably will need a new MAC, or at least unlink and relink your MAC after you first configure those addons.

What irish girl is saying though is that you do not have to have IPTV Stalker, especially if you don't need it. I'll only recommend IPTV Stalker for those who need to run an external EPG addon, or can't update to Kodi 15.

[KayKay]

You need to have the same settings in both IPTV Stalker and PVR Stalker ("Stalker Client") to have both work. In IPTV Stalker to reveal the fields, you need to have "Send Serial Number" and "Custom Serial" on, and use the identical settings in Serial Number, Device ID, Device ID2 and Signature, in Advanced in "Stalker Client". You probably will need a new MAC, or at least unlink and relink your MAC after you first configure those addons.

What irish girl is saying though is that you do not have to have IPTV Stalker, especially if you don't need it. I'll only recommend IPTV Stalker for those who need to run an external EPG addon, or can't update to Kodi 15.

Yep I have the same settings in both IPTV Stalker and PVR Stalker("Stalker Client"). I've unlinked and linked MAC address and still unable to load channels. I've changed my MAC in the donation center and then did the same in Stalker Client and IPTV Stalker Addon, still unable to load channels. I have0.8.4 Stalker Client and 9.0.21 Stalker App. I can get the App to work fine when I configure my serial settings but Stalker Client is the only thing I'm having issues with.

[dara]

You may need to bump up the connection timeout. The max default is 15, so if that doesn't connect, you may need to make a change in the settings.xml for the client. It's not hard, but maybe daunting for some.

[KayKay]

You may need to bump up the connection timeout. The max default is 15, so if that doesn't connect, you may need to make a change in the settings.xml for the client. It's not hard, but maybe daunting for some.

Could you tell me where to find that? I will be able to grasp it as long as I can find it. Is it located within the android file structure or I access it within Kodi app itself?

[KayKay]

You may need to bump up the connection timeout. The max default is 15, so if that doesn't connect, you may need to make a change in the settings.xml for the client. It's not hard, but maybe daunting for some.

Found it the settings xml file. Changed the timeout to 60 seconds still same error. Then tried at 90 seconds and still same error. i noticed when I changed the timeout settings in the xml settings it would show zero in the Stalker Client App. I'm still able to watch channels fine through IPTV Stalker App just fine. I just cant get the dang Stalker Client to work. All my settings are the same in both Apps

[Puska]

I posted in another thread, what worked for me was uninstall and install PVR Stalker and also leaving blank link for EPG

[dara]

Found it the settings xml file. Changed the timeout to 60 seconds still same error. Then tried at 90 seconds and still same error. i noticed when I changed the timeout settings in the xml settings it would show zero in the Stalker Client App. I'm still able to watch channels fine through IPTV Stalker App just fine. I just cant get the dang Stalker Client to work. All my settings are the same in both Apps

The settings.xml will get reset to 0 as well if you view the settings and click "ok" Try again, but make sure you just close that screen if you are viewing it to check your settings. If that doesn't work, and all your settings are good, you may not have other options other than a Kodi refresh.