Changed MAC and cleared Cache

[Toffeeman75]

Hi everyone, my 1st post. I have changed my mac and cleared cache numerous times. Authorization Failed all the time though? But some random channels work!

[high247]

You changed your linked mac on the website?

[Toffeeman75]

Yes twice now

[dara]

What add-on are you using? If you have some channels, you are connected.

[Toffeeman75]

Don't have any add-ons installed bar stalker. Random music channels work and that in the stalker add-on.

[eureka]

What sort of device are you using to connect?
What version of IPTV Stalker Video Addon is installed?
What version of Kodi is installed?

[Toffeeman75]

Android. Kodi 15 and stalker 1.0.18

[littlepr]

Systems were down. Everything back up.

[eureka]

Android. Kodi 15 and stalker 1.0.18
Try this:

- Uninstall Stalker 1.018

- For now disable Live TV in Settings -> TV

- Change your MAC address (remember to change it in your PVR Client settings also before you use it again.)

- Install v9.0.19 using the instructions from here: http://iptvtalk.net/showthread.php?7379-Modified-IPTV-Stalker-%289-0-19%29-iVue-compatible

- Test & make sure it loads channels

- Enable Live TV after you have updated your new MAC address in your PVR Client.

[eureka]

Sorry Toffeeman75,

I had two tabs open & another poster had the same problem as you but their live tv/pvr client was working, so ignore disabling live tv & updating your new MAC in PVR client, as you wouldn't have it enabled to begin with.

Just:

- Uninstall Stalker 1.018

- Change your MAC address

- Install v9.0.19 using the instructions from here: http://iptvtalk.net/showthread.php?7379-Modified-IPTV-Stalker-%289-0-19%29-iVue-compatible

- Test & make sure it loads channels

[Toffeeman75]

I've used all the mac addresses on the devices in my house and I am struggling to create a new one?

[eureka]

Go here:


http://www.miniwebtool.com/mac-address-generator/

In the 'MAC address prefix' field type 00:1A:78
In the 'MAC address format' field click the dropdown arrow & choose the second option (the one with the colons)
Click 'Generate MAC Address'
Use that as your MAC address when linking to your route/donation. If you get an error just change a digit or two until it's accepted.

[Toffeeman75]

Thanks for the help finally got the add-on working. Stuck on Stalker pvr client now. "Unable to load channels". Is server address 11.iptvprivateserver.tv? Thanks

[high247]

Thanks for the help finally got the add-on working. Stuck on Stalker pvr client now. "Unable to load channels". Is server address 11.iptvprivateserver.tv? Thanks

Yup thats it

[eureka]

Good, that's a start!

Yes it would be if you made your donation to NFPS. If not it would be one of these depending on where you made your donation:


Rocket - http://11.iptvrocket.tv
IPTV66 - http://66.iptv66.tv

are you using the instructions from this thread? http://iptvtalk.net/showthread.php?4483-How-to-set-up-pvr-stalker-with-NFPS-and-have-a-Full-EPG

[Toffeeman75]

Yes followed this. Tried with protocol and without and still get unable to load channels!!

[Blackbear199]

if you are using iptv stalker 1.0.18,ect you need to use
http://portal.iptvprivateserver.tv/
all the 11.iptvprivateserver.tv address are for pvr stalker version 0.8.3,ect

[Toffeeman75]

I'm using the latest version. Just getting unable to load channels

[eureka]

Just trying to figure out which PVR Stalker Client you're using: The built in Kodi PVR Stalker Client or the PVR Stalker Client NFPS that you would have downloaded?

[Toffeeman75]

Built in kodi 15

[Blackbear199]

are you entering anything for the timezone?
I recommend deleting it...leave it blank.

[eureka]

OK. In the configuration settings you should have:

General:
Active Portal: 1
Misc:
Connection timeout: 15

Portal 1:
MAC address: your MAC 00:1A:78:XX:XX:XX
Server Address: hxxp://11.iptvprivateserver.tv (replace xx with tt)
Auth credentials: Leave Blank
Password: Leave Blank
Guide:
Preference: XMLTV Only
XMLTV:
Scope: Remote URL
Remote URL: hxxp://nfpsf.********** (replace xx with tt)
Advanced:
Leave all fields blank

[Blackbear199]

for the epg address its better to use this format

http://**********/NFPSF.xml
the address eureka has redirects to the above and some people seem to have issues with that.
you can view all the epg url's here
http://**********

[Toffeeman75]

Yes all exactly the same. Really frustated now. Took me a long time to set up the add-on. Was going to have a go at the ivue next but my subscription will probably expire 😄

[Blackbear199]

if the everything is entered as above the only thing left is your mac,double check it with what u entered when you linked your mac.
check for the letter O where its suppost to be a zero,ect
mac address are letters A-F,numbers 0-9.
also where did you purchase your donation,it makes a difference as to which server address you use.
11.iptvprivateserver.tv is for papiao

[Toffeeman75]

Hahahaha what a nob. I had a 79 instead of a 78!!!! Tit...... So sorry for wasting your time and thanks

[eureka]

Hahahaha what a nob. I had a 79 instead of a 78!!!! Tit...... So sorry for wasting your time and thanks
It's an easy mistake to make.

Did the channels load?

[Toffeeman75]

Yes it's brill. Can you not select the programme from the epg though?

[Blackbear199]

when u select a program from the epg are you getting a popup box with options?
if you want it to tune to the channel when you select it...
system,tv,at the bottom change settings level to advanced or expert
under guide tab, change default select action to switch to channel.

[Toffeeman75]

Sorted cheers. Do you prefer this or the if He guide?

[Toffeeman75]

Ivue guide