Integrating Rocket with Simple PVR Client ...

[bruuce]

Hi..

I have a valid subscription on Rocket. I am using it on my Amazon Fire TV. I am integrating the PVR simple client with the IPTV stalker add on. My kodi is 15.1.1 and the IPTV stalker add on version is 1.2.0

I have two main questions..

1- when i start the PVR simple client, sometimes when i close a channel and switch to another one, it does not load. In such case, I have to close Kodi and re-open it again.
All channels work like charm only on the add on itself while on the PVR, first few channels and after some switching, they just do not load

2- I am tired with the EPG.. I read the tread here from page 1 to the last one and followed all steps... sometimes they show up, others they don't, sometimes partial EPG for some channels only.. I am using the NINJA one.. Also cannot get the time working correctly at all...My time is CET

Any help really would be appreciated

[built2last]

just use the stalker client not the simple iptv client.... you dont need iptv stalker addon installed you will see it will work way smoother.....when you use the simple iptv client you need the stalker addon it uses a m3u server sometimes the m3u server will crash and cause the channels not to load/work

[high247]

Its freezing because the firestick doesn't have either enough ram or the dual-core processor is maxed out. Epg is under construction.

[high247]

just use the stalker client not the simple iptv client.... you dont need iptv stalker addon installed you will see it will work way smoother

All pvr clients struggle on firesticks. Just say... Need more power. 😁

[bruuce]

When I disabled the simple client and enabled the Stalker client, it gives the message unable to load channels... Does it require username and password ? what's user name ?

[bruuce]

I have an Armada Mach 8 Pure Linus.. will that will do ?

[built2last]

in the simple client all you need is your valid mac the server address u can use 66.iptv66.tv set the epg to the ninja epg then go in and reset the pvr and epg databases a few times then it should load up

[garciarubz]

Im using a fire stick with stalker client and i have no problems other then a few bad channels here and there.

[bruuce]

Im using a fire stick with stalker client and i have no problems other then a few bad channels here and there.

Excuse my ignorance.. Stalker client does not work and gives error in loading channels... Is there anything in specific you should do there?

[Marley]

same here firestick run ok will never say great on dual

[bruuce]

in the simple client all you need is your valid mac the server address u can use 66.iptv66.tv set the epg to the ninja epg then go in and reset the pvr and epg databases a few times then it should load up

I don't need the IPTV Stalker add on ?

[high247]

I don't need the IPTV Stalker add on ?

Not if you just use stalker pvr client you don't.

[built2last]

try to re-install a fresh copy of kodi and see what happens

[high247]

Im guessing he clicked send serial and needs to change his donated mac. Seen this over and over on here now.

No one ever said click send serial except people trying to steal service. Sigh.......

[high247]

Upgrade iptv stalker to 9.0.19

[bruuce]

Upgrade iptv stalker to 9.0.19

Can I get a working link please ..

[tuxen]

yeah firestick will run pvr just as good as the rest of the kodi experience, and that's not a bad one.

[tuxen]

bruce.. nono just use the pvr stalker that comes with kodi for a start nothing else.
there are two addons a video addon 9.0.19 you have to download. and there is a pvr stalker 8.0.3 that comes with kodi.

like built2last wrote..

maybe install a fresh version of kodi?
turn of tv function and clear data
go to addons/my addons/pvr addons/ and locate pvr stalker and enable it
configure it with server 66.iptv66.tv
enter the mac you linked on iks66 link
turn on tv function and the channels should load.

if it works look at epg tutorials and tutorials in general
if it does not work change your mac a digit on iks66 and pvr stalker and it should work again, you might have made 2 connections at the same time playing around with different addons.

[bruuce]

Now...


Here's my experience so far....

I upgraded to Stalker 9.0.19
Made a fresh start for Kodi (Clear data, clear cache)
Uploaded Staker Client NFPS from here
Could not load channels at all using any of the two stalker clients (the one already in Kodi or the one downloaded from here)
I switched to PVR simple client
Used the Ninja epg .. This is the only link loading correctly (**********/NFPSF.xml)
I am CET.. I made the EPG +2 hours... and finally it loads correctly with right EPG

The only pain is the simple client.. still after few change of channels , it load quickly the next channels and it does not open...In such case that happens a lot, i have to go the stalker add on, I click stop in the setup menu, and re-start the client again.. I go back to the PVR simple client.. it work... and again after some switches between channels, the process have to be repeated again..

[sbdhulk]

Just a quick question .. if i am using rocket what server do i use for stalker client .