Infomir BLOCKING portals

[tuppaacc]

How could this affect sellers in the future?

I'm surprised no one has mentioned this already on the forums but apparently this was officially announced on 12/20/18


https://www.infomir.eu/eng/press-center/news/201-infomir-protects-the-copyright/

* Post #33 will have the 'NoBlock' file versions.
The files can be found thru a file host site which is shown at the very bottom of that post #33

[dishuser]

How will this affect us?

I'm surprised no one has mentioned this already on the forums but apparently this was officially announced on 12/20/18


https://www.infomir.eu/eng/press-center/news/201-infomir-protects-the-copyright/are you currently watching tv?

[crazed 9.6]

This started with infomir sometime ago. I saw it coming and saw it started many months ago.
It was about the same time they dropped Stalker Middleware and replaced it with the new Ministra Middleware.
They also at the time, posted documentation on their website talking about this and asking the public to report any infringements.
It was also about the same time that they removed their software releases from wikipedia, or at least moved them.

Stalker became so very popular over time and I guess infomir decided they did not want to be a known party any longer,. And with the 'new' laws in place in Europe, it became clear what and why this was happening.
:eek:

[tuppaacc]

This started with infomir sometime ago

Thank you

Any ideas on a Linux based box that isn't Android or Chinese?
I just want a simple box that only has that function. I sell a lot of boxes to older ppl and they wouldn't need all of those Android festures.



are you currently watching tv?
Maybe get the opinion from other sellers and not a sarcastic answer.

[kens]

are you currently watching tv?

This may apply more to VOD items.

It may be a settings problem, but I have MAC account for testing(p2 NFPS), and currently using with stbemu pro.
Login and TV access is OK.
VOD selection returns "Server Unavailable".

*Note: By using local playlist from template, VOD access is OK.

Just FYI
/kens

[dishuser]

Youre right, I should rephrased my question:

As a reseller that thinks of his long term customers should I be worry about 50 of my customers wanting a refund because their mag suddenly stop working?

Maybe get the opinion from other sellers and not a sarcastic answer
maybe buy a box that doesn't cave in and scream the sky is falling
as a seller you have more to worry about than disgruntled customers

[dishuser]

This may apply more to VOD items.

It may be a settings problem, but I have MAC account for testing(p2 NFPS), and currently using with stbemu pro.
Login and TV access is OK.
VOD selection returns "Server Unavailable".

*Note: By using local playlist from template, VOD access is OK.

Just FYI
/kens
that makes sense
good thing I don't use stalker(stbemu) anymore
lots of services have been dropping vod for the past year now (I read on other sites..lol)

[crazed 9.6]

Thank you

Any ideas on a Linux based box that isn't Android or Chinese?
I just want a simple box that only has that function. I sell a lot of boxes to older ppl and they wouldn't need all of those Android festures.


Most, if not all, emulate the Stalker Middleware or carry the Stalker Middleware onboard (like I said, Stalker became very popular as a Middleware) :eek:
They may call it something else and the outer looks and functions may be different, but it is an emulation of Stalker.
DreamOnLine or MyTVOnline or Buzztv are some examples.
Most all carry the Android OS with a linux kernel.

[Bkman2020]

Most, if not all, emulate the Stalker Middleware or carry the Stalker Middleware onboard (like I said, Stalker became very popular as a Middleware) :eek:
They may call it something else and the outer looks and functions may be different, but it is an emulation of Stalker.
DreamOnLine or MyTVOnline or Buzztv are some examples.
Most all carry the Android OS with a linux kernel.

yes, new middleware is android based now so its easy to block portals, linux had security holes.

[dishuser]

yes, new middleware is android based now so its easy to block portals, linux had security holes.

but with linux developer could patch "said" holes
not so easy with android

[Bkman2020]

Yeah but Android is more open source than Linux there for faster updates and patches.

[Bkman2020]

but with linux developer could patch "said" holes
not so easy with android

Android TV is the future

[gordiez]

It would seem to me the only way they can block urls is through firmware updates. I might be wrong on this but as a precaution ive turned off auto update!

[suport]

c/p

Infomir, the manufacturer of the popular MAG range of set-top boxes, says it will block the portals of suspected copyright-infringing IPTV providers following complaints from copyright holders. While MAG devices are used to access plenty of legal services, the news will come as a blow to large numbers of customers who use the very capable devices to access unauthorized platforms.

Over the past couple of years, unauthorized IPTV services have been making their presence known in the ‘pirate’ TV space.

As recently reported, pirate IPTV services are accessed by 5.5% of US and Canadian households. The range of content is phenomenal, with few – if any – official entertainment companies in a position to compete.

Such services are typically accessed via set-top boxes, from ubiquitous Android-based platforms through to dedicated IPTV hardware. None of these devices are designed to be infringing but with the addition of third-party services, they can be transformed into piracy powerhouses.

For those looking for a premium IPTV experience, the MAG box range from Ukraine-based Infomir are the tools of choice. The compact devices are used by thousands of consumers to access legitimate content via a beautiful interface but like any such hardware, these boxes can also be used to access infringing streams.

Infomir has understandably distanced itself from this kind of illicit consumption but until now doesn’t appear to have interfered with the choices of its customers. Moving forward, however, it’s clear that will change.

“Infomir is an international company operating in over 150 countries globally. As a manufacturer of multimedia devices, we are subject to copyright and related rights legislation, which we respect and adhere to,” the company says.

“Upon receiving complaints from a copyright holder, Infomir is obliged to restrict access from its devices to any portal suspected of copyright infringement. The restriction will be maintained until the issue with the copyright holder is resolved.”

IPTV services (both legal and less so) often supply a URL which enables MAG and similar devices to access their ‘portal’. These are entered into the device’s setup page, with the box typically being authorized at the provider’s end by verifying its MAC address against a pre-registered one.

However, Infomir appears able to prevent certain portal URLs from being accessed via its set-top devices and there are some unconfirmed reports online which indicate this may be happening already.

TorrentFreak spoke with Infomir to find out more about this development. Will the company block portals following straightforward copyright complaints, for example, or is a court order required?

“The complaints need not be necessarily backed up by a court order. The form and contents of a copyright complaint must conform to the DMCA requirements,” Infomir Legal Counsel Vladislav Larionov informs TF.

“Our policy is to comply with the EU and US legislation on copyright and take into account best practices in the area of handling of copyright infringement reports. In particular, we only process the reports of copyright infringement that contain all the elements of notification envisaged by the DMCA.”

Some IPTV providers not only provide access to ‘pirate’ streams but also other content that has the potential to be non-infringing, depending on a users’ circumstances. For instance, there could be questions raised over legality when the holder of a UK TV license only accesses BBC One and similar channels via an IPTV service.

Speaking in more general terms, TF asked Infomir if over-blocking is a concern. The company told us that they require detailed complaints from rightsholders to block portals and they give services that are blocked the right to file a counter-complaint.

“We respect the rights of legitimate service providers, and we are concerned that such service providers might be reported by mistake or due to misidentification. That is why we request that copyright infringement reports submitted to us comply with the DMCA and contain a statement under penalty of perjury that the report is true and accurate,” Larionov explains.

“We also review each copyright infringement report to prevent false or abusive ones. Finally, we provide every service provider with a possibility to oppose a copyright infringement report. In case there is a dispute between a copyright holder and a service provider, we will request a court order to maintain access restriction to a portal.”

While copyright holders who file for blocking injunctions in court can be identified fairly easily, discovering who has filed a complaint with Infomir is less straightforward. The company told TF that it cannot provide information on who has requested a block other than to say it is mostly “big copyright holders, anti-piracy associations, and companies that provide copyright management and protection services.”

Finally, it’s not entirely clear how MAG devices are prevented from accessing portal URLs and Infomir informs TF that it won’t provide that information as it might “downgrade” its “access restriction system”. There is already some speculation on specialist forums that firmware updates may be responsible but no clear confirmation is currently available.

[Bkman2020]

I have a feeling all others will follow.

[dishuser]

Yeah but Android is more open source than Linux there for faster updates and patches.

how is it more open source?
open source is open source...lol
this reply sent using linux mint :cool:

[kens]

It would seem to me the only way they can block urls is through firmware updates. I might be wrong on this but as a precaution ive turned off auto update!

Infomir would receive an order to block services A, B & C, as they have been disseminating copyrighted material without permission.
A, B & C, use Infomir's Stalker based IPTV backends, that can be accessed by Infomir, for maintenance and updates.
Infomir would have a method to limit or restrict service to A, B & C, if, for example, if they did not pay the monthly or yearly subscription for the service.
Therefore, most likely, there are probably more intricate control methods available, that could, for example, turn off VOD services, etc.

Just my suspicion.
/kens

[stilled]

I would think time to get a new box brand, just my suspicion, lol,

[Ryu]

I would think time to get a new box brand, just my suspicion, lol,

I agree and forumer z7+ with 5G just came out🙂. Looks pretty good box.😎

[dishuser]

I agree and forumer z7+ with 5G just came out. Looks pretty good box.

so did buzz
over a year ago...lol

[Ryu]

I would think time to get a new box brand, just my suspicion, lol,

Btw, there's going be a raffle for formuler z7+ With 5G on this site very soon. Keep eye on it. You can win for free as well😎😎😎😎😎😎. Of course one lucky member already won 1 of them.

[stilled]

More of a shield guy, lol,

[Digitaldan]

My box works great. Very simple solution for us that have them. Just don't update anymore. That said I was looking at another Mag. If they shut down proven portals after a hearing that is one thing. To do it unilaterally on just a suspicion is another. I wonder if the sales will drop so much that they go under..... Everyone knows that there is more than 5% watching. Common sense in my humble opinion. Just have to wait and see I gues. Until then I am looking at other options besides Infomir. That is like going after the gun manufacturer since they can't take guns.

[kens]

You misunderstood me.
Infomir would, theoretically, disable VOD access on the site(s) in question, on the backend, not the individual users devices (if the Order was for VOD items).

/kens

[BliNDF123]

One of the members over on Reddit's IPTV sub figured out how to get around the block:
Explanation in post and he will possibly be sharing patched firmware for boxes that blocks the blacklist.
Edit: It's probably a little more advanced for the average user:

But as he mentions in the OP he will try to get the firmware's patched and shared by the weekend.


https://www.reddit.com/r/IPTV/comments/aesulq/defeating_the_infomirmag_portal_blocking/

https://www.reddit.com/r/IPTV/comments/aesulq/defeating_the_infomirmag_portal_blocking/edsaen1/

[crazed 9.6]

thnx for sharing BliNDF123 :)

[mr.crane]

So you are saying, not safe to buy a Mag box. I have a Mag 250 that is still working on iptv.

[ssathi]

Mags are fine . Blame the provider .

[NBS]

Mags are fine . Blame the provider .

that makes 0 sense

[crazed 9.6]

So you are saying, not safe to buy a Mag box. I have a Mag 250 that is still working on iptv.

you are okay.
It is not about being save or not... maybe about loosing connection.

But you are save bro.... keep informed on further progress and or news :)

[Gabacho]

Crazed it's safe not save.

[Dodgeit1]

Crazed it's safe not save.If he didn't save him he wouldn't be safe lol.

[crazed 9.6]

here it is guys.
Use at own Risk !!!

Thr0wawayicus is a software developer by day :)

C/P from Thr0wawayicus

"It definitely only came in the most recent firmware builds they released late last year - the browser app is definitely phoning home.
Older firmwares are fine - but newer MAGs that don't have an older working version will need a patch, until I find a URL that triggers the block I can't test properly, so I can't be 100% certain that I can make a working patch.
It would be very nice to defeat their brand new anti-piracy campaign within a month of them launching it."

"I got a couple of portals sent to me this morning - and I've started testing. It's 100% only in the firmware they released for all their boxes in the second half of last year and uses a combination of phoning home + a local list in case it can't reach the authorization server."

"Breaking the connection to Infomir shouldn't be too bad, but I'll need to find a good spot to insert a command to purge the local list during bootup + package it into a firmware for each model that affected users can flash (and test to make sure I don't break anything else in the process.)"


The basic instructions for building your own firmware are on the Infomir Wiki

https://wiki.infomir.eu/eng/set-top-box/for-developers/stb-linux-webkit/stb-software-image-making/operators-utilities-and-instructions-for-building-stb-software-image

To edit the hosts file (/etc/hosts) add the following line: 127.0.0.1 mag324.dcbs.infomir.com (replace mag324 with the correct model for you)
ideally designed to be done as part of the process of compiling a custom firmware. If you want to do it directly on the box then you can access it using an SSH client (such as PuTTY)

You connect to the IP of your box using your SSH client with the following details:
Login: root
Password: 930920

Infomir's factory images disable SSH, so if you can't connect then you'll need to flash your box with a firmware from:

http://soft.infomir.com
Browse to the page for your specific model of box, and download the file named "imageupdate"


Formatted Storage Drive (USB Stick) as FAT32.
MAG254 and earlier can be picky about which sticks they recognize, you may need to try a few - don't use USB3.0 sticks.
Or use the wifi USB port if having USB recognition issues, if that port is available on your Mag model.

Place that file on a USB stick in a folder named after your box model (eg mag256) and then reboot your box while holding down the menu key on the remote.
This will take you into the setup menu

Select Upgrade Tools
Select Upgrade from USB
Yes

That should flash your box with a firmware that allows console access.

Once you get in via SSH, run the following commands to do a quick and dirty patch:

echo 127.0.0.1 mag256.dcbs.infomir.com >> /etc/hosts
rm /mnt/Userfs/data/dls.backup
reboot && exit

Obviously as in the instructions above, replace mag256 with whatever model of mag you have. This isn't (in my opinion) as good of an option as a custom firmware since it won't auto-purge the cache if it somehow comes back, or block automatic updates (so make sure you disable automatic updates yourself BEFORE you take the box online after flashing it)


UPDATED
Custom firmware is ready to download and use :)
Will preserve portal settings, but disables the block and prevents any remote updates from Infomir's servers.
None of this actually breaks any license agreement, and is all done with tools/files they've released specifically for end users to use.


https://anonfile.com/w39c38qdba/NoBlock_zip

thnx monty49 for the file link :)

If having trouble with the above link, then try the mediafire link

http://www.mediafire.com/file/hqa0b0461iskblf/NoBlock.zip/file

[crazed 9.6]

Have been 'testing' this today.
Even thou the mag is not blocked, I did not like the idea that informir could at any time, so I loaded this NOBLOCK custom image file... and the 'phone home' thing is never a good thing to have anyway :eek:

Loading is easy enough.
From the anonfile.com/w39c38qdba/NoBlock_zip file, grab the file folder which coincides with your mag box (mag254 or mag322 or etc). Transfer it to your FAT32 (or xFat) USB stick. It should be in a folder labeled as mag254 or whatever your box designation is. Inside that folder is a bootstrap file and an image file.
Leave them both in that folder and with that folder on your USB storage drive insert into the Mag, pull the power cord,disconnect.
Then while pressing and holding the menu button on your remote control, reattach power and let it boot into the setup menu.
-Select Upgrade Tools
-Select Upgrade from USB (bootstrap)
-Yes

It will take just a few minutes to fully load. This does not erase your server setups.
Onscreen prompts will tell you progress.
Once it is loaded you can check in the Settings menu and in Device info.
It will show NOBLOCK_254 as part of the image description.

Working like a champ !

credit to
Thr0wawayicus

Models include:
mag250
mag254
mag256
mag322
mag324
* some mag models will not have the Bootstrap included as a separate 'file' in that folder.
That is okay, just ensure you transfer the correct folder onto USB device.

[iptv]

Great, Thank you

[Rinny]

wow Great work Crazed!!!!!

[Digitaldan]

I hit link and go to a page that says download. I hit download and get sent to a shopping page.............. What am I missing???



EDIT: Just got it started. For some reason I had to click several times getting a "Shopping" page each time. Finally, it gave me a download window. Don't know if it was me or not, but I did play with "Privacy Badger". An ad blocker and anti tracker program. After changing some of those settings, got the download window. Don't know if it was the anti tracking program or the fact I went to the ad page so many times. Just letting people know what I went through. Have a great one!

[meijvogel]

Thanks for the files.
Question: in the 256/322/324 dirs. is no bootstrap file. Is that correct ?

[Rinny]

Thanks for the files.
Question: in the 256/322/324 dirs. is no bootstrap file. Is that correct ?

Wondering the Same..

[monty49]

Thanks for the files.
Question: in the 256/322/324 dirs. is no bootstrap file. Is that correct ?

I think the Bootstrap is integrated into the imageupdate file of the 256,322 and 324 as the imageupdate file is alot bigger.

[crazed 9.6]

I think the Bootstrap is integrated into the imageupdate file of the 256,322 and 324 as the imageupdate file is alot bigger.

this could be true monty, thnx.

And also....

From what I can tell, those models do not use a separate bootstrap file when loading an image file.
You can try without.
Or you can use the infomir wiki site and open the file release for those models (r23 release). Check if a bootstrap file is included in that release for those models.
Remember thou, that each release version would also have it's own dedicated bootstrap... in otherwords you can not use a bootstrap file that comes with the mag254 r19 release with the mag254 r23 release.

C/P from infomir...
Bootstrap - is startup file that is used to load image into RAM.
Used for updating from bootloader to STB models MAG250/254/270.
It is also used for system recovery of STB models MAG-256/322/324/349/351 and higher.

[Rinny]

Am able to load the Mag 322 File and Working fine :)

The Mag 254 Unable to load this update file.. Box on the r23 file now

any ideas

[crazed 9.6]

The quote suport brought to the thread earlier and is shown below came from TF
Coded link below is today's 'breaking news' from TF

https://torrentfreak.com/set-top-box-anti-piracy-code-neutralized-by-hack-190115/



c/p

Infomir, the manufacturer of the popular MAG range of set-top boxes, says it will block the portals of suspected copyright-infringing IPTV providers following complaints from copyright holders. While MAG devices are used to access plenty of legal services, the news will come as a blow to large numbers of customers who use the very capable devices to access unauthorized platforms.

Over the past couple of years, unauthorized IPTV services have been making their presence known in the ‘pirate’ TV space.

As recently reported, pirate IPTV services are accessed by 5.5% of US and Canadian households. The range of content is phenomenal, with few – if any – official entertainment companies in a position to compete.

Such services are typically accessed via set-top boxes, from ubiquitous Android-based platforms through to dedicated IPTV hardware. None of these devices are designed to be infringing but with the addition of third-party services, they can be transformed into piracy powerhouses.

For those looking for a premium IPTV experience, the MAG box range from Ukraine-based Infomir are the tools of choice. The compact devices are used by thousands of consumers to access legitimate content via a beautiful interface but like any such hardware, these boxes can also be used to access infringing streams.

Infomir has understandably distanced itself from this kind of illicit consumption but until now doesn’t appear to have interfered with the choices of its customers. Moving forward, however, it’s clear that will change.

“Infomir is an international company operating in over 150 countries globally. As a manufacturer of multimedia devices, we are subject to copyright and related rights legislation, which we respect and adhere to,” the company says.

“Upon receiving complaints from a copyright holder, Infomir is obliged to restrict access from its devices to any portal suspected of copyright infringement. The restriction will be maintained until the issue with the copyright holder is resolved.”

IPTV services (both legal and less so) often supply a URL which enables MAG and similar devices to access their ‘portal’. These are entered into the device’s setup page, with the box typically being authorized at the provider’s end by verifying its MAC address against a pre-registered one.

However, Infomir appears able to prevent certain portal URLs from being accessed via its set-top devices and there are some unconfirmed reports online which indicate this may be happening already.

TorrentFreak spoke with Infomir to find out more about this development. Will the company block portals following straightforward copyright complaints, for example, or is a court order required?

“The complaints need not be necessarily backed up by a court order. The form and contents of a copyright complaint must conform to the DMCA requirements,” Infomir Legal Counsel Vladislav Larionov informs TF.

“Our policy is to comply with the EU and US legislation on copyright and take into account best practices in the area of handling of copyright infringement reports. In particular, we only process the reports of copyright infringement that contain all the elements of notification envisaged by the DMCA.”

Some IPTV providers not only provide access to ‘pirate’ streams but also other content that has the potential to be non-infringing, depending on a users’ circumstances. For instance, there could be questions raised over legality when the holder of a UK TV license only accesses BBC One and similar channels via an IPTV service.

Speaking in more general terms, TF asked Infomir if over-blocking is a concern. The company told us that they require detailed complaints from rightsholders to block portals and they give services that are blocked the right to file a counter-complaint.

“We respect the rights of legitimate service providers, and we are concerned that such service providers might be reported by mistake or due to misidentification. That is why we request that copyright infringement reports submitted to us comply with the DMCA and contain a statement under penalty of perjury that the report is true and accurate,” Larionov explains.

“We also review each copyright infringement report to prevent false or abusive ones. Finally, we provide every service provider with a possibility to oppose a copyright infringement report. In case there is a dispute between a copyright holder and a service provider, we will request a court order to maintain access restriction to a portal.”

While copyright holders who file for blocking injunctions in court can be identified fairly easily, discovering who has filed a complaint with Infomir is less straightforward. The company told TF that it cannot provide information on who has requested a block other than to say it is mostly “big copyright holders, anti-piracy associations, and companies that provide copyright management and protection services.”

Finally, it’s not entirely clear how MAG devices are prevented from accessing portal URLs and Infomir informs TF that it won’t provide that information as it might “downgrade” its “access restriction system”. There is already some speculation on specialist forums that firmware updates may be responsible but no clear confirmation is currently available.

[crazed 9.6]

Am able to load the Mag 322 File and Working fine :)

The Mag 254 Unable to load this update file.. Box on the r23 file now

any ideas

can you be more specific on why it will not load ?

Are you getting into the setup bios menu ?
Is the USB content recognised ?
Does the load start?

[Rinny]

254 Mag
Bois loaded
Bootstrap and imageupdate file in the folder

Press to load saying imageupdate file not located

[crazed 9.6]

254 Mag
Bois loaded
Bootstrap and imageupdate file in the folder

Press to load saying imageupdate file not located

mag254 and mag250 especially (as compared to other Mag models) are very 'picky' about their USB storage devices attached.
Try another USB storage device (formatted FAT32)
Or reformat that device that you have and try again.

[Rinny]

Got Her Buddy Thank You For Your Help!!

Unplug the wifi antenna from the back and use the rear USB (254Mag)

All Good...Both Boxes running Mint..

[iptv]

I downloaded it twice on two different computers, used two different USB sticks but get the message `Wrong Signature`on my MAG254 when it tries to load the firmware, any suggestions?

[monty49]

I downloaded it twice on two different computers, used two different USB sticks but get the message `Wrong Signature`on my MAG254 when it tries to load the firmware, any suggestions? I had the same problem so I went to the infomir site and downloaded multicast.When using multicast for the mag254 you have to change the ip address port on stream1 to 224.50.0.100:9000 and on stream2 to 224.50.0.101:9001.Input Bootstrap file in stream1 and imageupdate file in stream2. Takes about 20 minutes to complete then the box will reboot.

[meijvogel]

Did the trick on 254 and 322, worked out fine. But …..
the wired connection goes perfect but for the wireless connection it gives an unusable MAC nr., not a 00:1A:79
Can this be changed somewhere ?

[crazed 9.6]

use the MAC from the box, not from wireless MAC

[meijvogel]

Thank you Crazed, but that does not work. The unusable MAC nr. also appears in the modem/router as attached device so it will also appear as so in the server. (I suppose)

[dishuser]

Thank you Crazed, but that does not work. The unusable MAC nr. also appears in the modem/router as attached device so it will also appear as so in the server. (I suppose)

the mac you see in router is wireless mac

[meijvogel]

the mac you see in router is wireless mac

thus it is denied access to the server because it is not a: 00:1A:79

[dishuser]

thus it is denied access to the server because it is not a: 00:1A:79

the server picks up the box mac

[iptv]

I had the same problem so I went to the infomir site and downloaded multicast.When using multicast for the mag254 you have to change the ip address port on stream1 to 224.50.0.100:9000 and on stream2 to 224.50.0.101:9001.Input Bootstrap file in stream1 and imageupdate file in stream2. Takes about 20 minutes to complete then the box will reboot.

Thanks monty49, I will try it and see if it works

[4me2c]

thus it is denied access to the server because it is not a: 00:1A:79

Try Rebooting the Router...!

[meijvogel]

Thank you Dishuser and 4me2c. It is working perfectly on both providers now. :)

[redskins]

when trying to download the no block file, it says my flash player needs to be updated. when I try to update the flash player with the download file, my anti virus (Norton) says it's not safe and delete the file. What so I do now?

[Digitaldan]

Shut off the antivirus before updating and try again.

[Dragon54]

Hi Crazed,
Which version is the no block one for Mag 254 ?

[4me2c]

Hi Crazed,
Which version is the no block one for Mag 254 ?

Look at Post #'s 1)33, 2)34 and 3)49...! and Give Thanks to the Posters Please...!

[crazed 9.6]

yes, the download is shown at the bottom of post #33
The separate versions will be in separate folders and labeled as such

[Dragon54]

I know which to use in the Rar file I mean what version/revision was edited.

[crazed 9.6]

I know which to use in the Rar file I mean what version/revision was edited.

It was the last one released by infomir
0.2.18-r23
'
But to check that, after the modified file has been installed it will show the version in the 'Settings menu > Device info' and with 'NOBLOCK_254' as part of the image description.

[geevee]

Thankyou Crazed !!!!!
I'm a newbie and even I got it to work!!
Great website guys.. thks for the help.

[geevee]

Posted in error seems to be working

[crazed 9.6]

Posted in error seems to be working

I saw what you had posted earlier and since deleted.
One thing about the 322 model but with the 324 showing in the firmware loaded, that you had mentioned....
With these mags, their firmware is basically the same between some of the models, except the boot up process (or accessibility there-of) maybe only difference really.
It should not be surprising to see the firmware show as a different model. The 254 model even at times will show the 250 firmware designation.
Long as you choose correct designated firmware when loading.

[suport]

c/p
infomir Anti Piracy Statement
this is in infomir webpage

Infomir learned about the fact of illegal interactive TV services.

The MAG Set-Top Boxes appear to be involved in using content without the rightholder’s consent. Governed by the current legislation, Infomir warns the OTT service providers that illegal content distribution and usage is prosecuted under copyright law.

All service, support and sales related requests for those companies, their distributors and customers will be denied.

We strongly recommend our partners, clients and distributors to abstain from business contacts with the above mentioned services or from any other pirate resources in order not to violate the law.

[Dragon54]

Thanks Crazed Works Great!!

[xpsolutions]

Just tried on a mag322 thats stb blocked but after the flashing and rebooting, it still asking for password. cant access system settings

[crazed 9.6]

accessing system settings should have nothing to do with iptv blocking.
What password is being asked for ?

[xpsolutions]

Mag 322, after booting and loading for a few seconds, an 'Unlock' pop up comes up asking for a password.
One is rendered unable to access Menu or system settings' or go any further. I presume MAC address is blocked by infomir.
Tried the 'NO Block' file which did its process and on reboot nothing changed I still get that same Unlock pop up.
First time I'm seeing it

[NBS]

have you tried 5555?

[xpsolutions]

Yes. Actually Youre able to key in the password field but clicking the OK on remote doesnt do anything not even a msg to say wrong password.

[crazed 9.6]

try re-installing that NoBlock file.
I was reading and it says that Auto Purging may still happen, if that does happen, then a re-install may fix it

[crazed 9.6]

the NoBlock can be looked at as a 'patch' file
The actual fix would have to be complied into a firmware 'complieation' :)
The creater said that, sort of :)

That 'Auto Purge' could not be fixed correctly with a 'patch' file

[crazed 9.6]

Auto Purge basically means that the box can be set into mode to looking for new firmware update.
Un-benounced to you !

[crazed 9.6]

gotta give it to them.. that was a 3 setup defensive they did there. They already had 2 that failed.
Kudos to them (in the realm of things) :)

[Bkman2020]

They are bricking boxes that phone home from what I heard, they saving there asses.i think others will follow as well if they play catch up.

[xpsolutions]

try re-installing that NoBlock file.
I was reading and it says that Auto Purging may still happen, if that does happen, then a re-install may fix it

Reinstalled it thrice but its still locked.

[crazed 9.6]

January 16th, 2019, the District Court in Bremen, Germany granted preliminary injunctions against two distributors selling certain set-top boxes in Germany.
The contested devices (set-top boxes), among other things, emulated the MAC addresses of Infomir’s MAG set-top boxes. The Court prohibited the distributors from selling these and other devices that emulated Infomir’s MAG set-top boxes.

And then at a technology exhibition in March.....
CABSAT 2019: Shenzhen GYS Technology Co., Ltd. booth shutdown.
Published on 15/03/2019
The administration of CABSAT exhibition, which was held in Dubai, UAE from 12 to 14 of March, terminated contract, shut down the booth and restricted access to the event for Shenzhen GYS Technology Co., Ltd., a Chinese manufacturer of IPTV devices.
The reason for this was a violation of the event’s policies and encroachment on the products of the Infomir group of Companies.
Shenzhen GYS Technology products emulated Infomir’s MAG set-top boxes, which allowed them to utilize Infomir’s Middleware, the software for managing IPTV/OTT projects.

[harpdog]

well I got image no block loaded but still no love.
I unplugged dongle in back
put fat 32 usb in back usb port
plugged in box while pushing button above volume with 3 dots
chose upgrade tools
usb bootstrap press ok
image loaded
shows no block image
on start up I have a different look instead of black I have informir logo with hdmi etc
after few minutes sometimes I get that portal loading but most of the time no. I have 2 different iptv providers that I am a r****ler of so I kno mac is loaded in both
properly but I still get black screen. I think this may be an expensive door stop but I ran out of doors because my dreamboxes, SV, Ariza, 3100 Buzz all are on my doors have stops in and out
I am not a quiter. I have all day and after this weekend the rest of my free time to beat informir at their game.

ON AN EDITORIAL NOTE; I find it funny that informir took this way for avoiding copyright illegalities when this is why they but the boxes and developed the software to do this and having a call home first written into the coding was why we are in this mess so instead of rewriting the files and "leaking" a fix, they chose to brick and disable all the devices that had complained server and were complained about. This almost a boycot time for them. I bought a dreamlink T2 but my 4gig android box may not ever get bricked from the company that made it. Most likely scenario is cheap stuff will break fast than good stuff. Next on my shopping list is a firestick
NO MORE INFORMIR

NO MORE INFORMIR making a sign right now haha happy face every one

[ericw9]

As posted in the MAG322 forum...is anyone here able to compile newer versions of the Custom No-Block firmware? Not sure about the other models, but the MAG322 has had a new official firmware release July 1st and it'd be really cool to have that made into CFW.

[Gattsu]

Have been 'testing' this today.
Even thou the mag is not blocked, I did not like the idea that informir could at any time, so I loaded this NOBLOCK custom image file... and the 'phone home' thing is never a good thing to have anyway :eek:

Loading is easy enough.
From the anonfile.com/w39c38qdba/NoBlock_zip file, grab the file folder which coincides with your mag box (mag254 or mag322 or etc). Transfer it to your FAT32 (or xFat) USB stick. It should be in a folder labeled as mag254 or whatever your box designation is. Inside that folder is a bootstrap file and an image file.
Leave them both in that folder and with that folder on your USB storage drive insert into the Mag, pull the power cord,disconnect.
Then while pressing and holding the menu button on your remote control, reattach power and let it boot into the setup menu.
-Select Upgrade Tools
-Select Upgrade from USB (bootstrap)
-Yes

It will take just a few minutes to fully load. This does not erase your server setups.
Onscreen prompts will tell you progress.
Once it is loaded you can check in the Settings menu and in Device info.
It will show NOBLOCK_254 as part of the image description.

Working like a champ !

credit to
Thr0wawayicus

Models include:
mag250
mag254
mag256
mag322
mag324
* some mag models will not have the Bootstrap included as a separate 'file' in that folder.
That is okay, just ensure you transfer the correct folder onto USB device.

Hi Crazed,

Could you please provide any assistance with this? http://iptvtalk.net/showthread.php?41071-Mag-322-2-20-09-No-Block-CFW&p=258082&viewfull=1#post258082

Also, based on your experience. Should I change to another box cheaper and as reliable as the mag322? Which one?

Thanks in advance

[crazed 9.6]

I don't know what to say about them Mag boxes any more.
I have heard recently that the new firmware is no longer blocking portals, but is just what I heard and may not be true at all.
Their Minstral middleware is now being used extensively and the newest firmware released may be addressing that, but again, I do not now for certain.

Listed below in no particular order re the boxes I'd recommend for IPTV service.
Some are more pricey then others but they all are decent boxes for IPTV service.

Dreamlink T2
Dreamlink Prime
Dreamlink T3

EZ Media Player

Buzztv xpl3000 Basic
Buzztv xpl3000
Buzztv xr & xrs

Formuler Z7+ 5G
Formuler Z8

[Gattsu]

I don't know what to say about them Mag boxes any more.
I have heard recently that the new firmware is no longer blocking portals, but is just what I heard and may not be true at all.
Their Minstral middleware is now being used extensively and the newest firmware released may be addressing that, but again, I do not now for certain.

Listed below in no particular order re the boxes I'd recommend for IPTV service.
Some are more pricey then others but they all are decent boxes for IPTV service.

Dreamlink T2
Dreamlink Prime
Dreamlink T3

EZ Media Player

Buzztv xpl3000 Basic
Buzztv xpl3000
Buzztv xr & xrs

Formuler Z7+ 5G
Formuler Z8

Thanks a lot buddy!

I just know that before I ran the Noblock patch, I updated the firmware with the latest version from infomir. I did not enter the portal url...just in case. As soon as that update is done a privacy and policy agreement popsup telling you that a looootttt of information from the user is going to be collected. Including portals, trafic, apps...and I did not see that with my MAG254. Lets just wait a see.
I will definitely check on some of the boxes you recommend.

[300turboz]

Has anyone gotten these boxes to work

[Rinny]

working fine
MAG 254 322 324 no problems

[Dmaster_PR]

Still have stn blocked even after no block file. Internet provider is Liberty Puerto Rico.

Any updates on PR getting thos to work?

[dtvhu86]

Just loaded on mag254, still getting page loading error.

[Biglo]

I tried to load this file for the mag254 and I keep getting an error message. "file mag254/image update not present"

I've already used like 4 different usb drive and I formatted them all to fat32 and even tried exfat. I made sure to copy the entire folder with the "mag254" name and I also safely ejected the devices all the time andddd I tried both usb slots on the device and I'm still getting the error.

I don't know what else to try.

Edit: Was able to finally get this to work after trying 3 more USB drives lol.

[crazed 9.6]

try downloading the file from the mediafire link shown below, and see if that makes a difference


http://www.mediafire.com/file/hqa0b0461iskblf/NoBlock.zip/file

[oquetuque]

Hello guys,

With rootFS version: 2.20.10r2-322 I can no longer downgrade to the NoBlock firmware. It says "Unsupported Architecture".
Is it possible to create a new noblock with the latest firmware? Or can I compile it myself what files are changed?

[crazed 9.6]

Hello guys,

With rootFS version: 2.20.10r2-322 I can no longer downgrade to the NoBlock firmware. It says "Unsupported Architecture".
Is it possible to create a new noblock with the latest firmware? Or can I compile it myself what files are changed?

did you use the correct 'No_Block' file for the 322 ?

I think shown in post #33 or #34, it shows how the guy compiled these No_Block files.

[oquetuque]

did you use the correct 'No_Block' file for the 322 ?

I think shown in post #33 or #34, it shows how the guy compiled these No_Block files.

Yes I used the No Block for the Mag 322 and it is not working, tried flashing over the "bios" as well.
I saw comment #33 but that solution isn't working as well, I connected to the mag box over SSH and added the IP/URL to the hosts file, the file he mentions to delete doesn't exist on my mag, I rebooted but it is still blocking the service URL / Portal

[crazed 9.6]

try the method outlined in the post linked shown below
http://iptvtalk.net/showthread.php?26924-How-to-use-the-supported-Playlist-on-Mag-STB

It discusses the Rocket server but nfps and iptv6 servers will be the same , except for their own websites.

And the link next link is a more in-depth look at how to get a Playlist copy or Playlist URL from service website.
http://iptvtalk.net/showthread.php?27179-How-to-get-a-Rocket-Playlist

I do not know if this will work, but may be worth a try

[oquetuque]

try the method outlined in the post linked shown below
http://iptvtalk.net/showthread.php?26924-How-to-use-the-supported-Playlist-on-Mag-STB

It discusses the Rocket server but nfps and iptv6 servers will be the same , except for their own websites.

And the link next link is a more in-depth look at how to get a Playlist copy or Playlist URL from service website.
http://iptvtalk.net/showthread.php?27179-How-to-get-a-Rocket-Playlist

I do not know if this will work, but may be worth a try

Hey sorry if I'm missing something, but that information has nothing to do with firmware?

[crazed 9.6]

Hey sorry if I'm missing something, but that information has nothing to do with firmware?

correct. It is nothing to do with firmware.
It's simply another method to connect to server thru the mag box options.
I doubt that will work thou, if other does not.

Is it worth a try ?
Sure :)

if anything, it may give insight to other things :)

[oquetuque]

correct. It is nothing to do with firmware.
It's simply another method to connect to server thru the mag box options.
I doubt that will work thou, if other does not.

Is it worth a try ?
Sure :)

if anything, it may give insight to other things :)

Thanks for your help, but it seems the newer Firmwares are blocking the downgrades, I didn't wanted to risk getting another mag box and I generally been having a lot of hardware problems with Mag, so I ordered an Amazon Fire Stick TV and going with STBEMU Pro for it.

[Billsage]

Hi guys I know this is an old thread but here goes I have been sent by mistake four MG Pro pure linux boxes and I got a trial m3u for one of them and it allows me to access VOD and series but it updates live Tv but won't let me access it. Any Ideas please.

[crazed 9.6]

Hi guys I know this is an old thread but here goes I have been sent by mistake four MG Pro pure linux boxes and I got a trial m3u for one of them and it allows me to access VOD and series but it updates live Tv but won't let me access it. Any Ideas please.

probably all depends on what the server is allowing. Hard to say thou.
Its an unknown server, so its an issue we can't help with :eek:

[Billsage]

[QUOTE=crazed 8.4;275799]probably all depends on what the server is allowing. Hard to say thou.
Its an unknown server, so its an issue we can't help with :eek:[/QUOTE
Thank you for the reply I used the same suppliers trial on an android box and it worked fine.I suspect the software is out of date but I can't find any update for it.
oranthservice.site:85/mg_pro/upgrade/3 is current software.Any ideas guys.

[Shooty]

Hi guys I know this is an old thread but here goes I have been sent by mistake four MG Pro pure linux boxes and I got a trial m3u for one of them and it allows me to access VOD and series but it updates live Tv but won't let me access it. Any Ideas please.
If sent by mistake, send them back and get Android units.
As for this Thread, Infomir can only block portals if you are accessing Servers using MAC Authentication client/server protocol.
M3u playlists use another access method,
/Shooty