mode not supported

[sta_minghia]

hi all have a big problem rebooted my mag254 when powered bag mode not supported and cannot get any were PLEASE some help
thank you all giovanni

[Marley]

think it has rca port use that to get back where you where at

[Marley]

i would be small whole to plug into

[Marley]

i dont think it has aspect button on the remote but check if it has click on it few time

[sta_minghia]

thank you i will try when i get home

[Digitaldan]

Check this out...... This should get you some control back.
http://iptvtalk.net/showthread.php?530-how-to-reset-your-box

[sta_minghia]

i would be small whole to plug into

it worked ok but the picture is terreble wen i plug in the hdmi cable back to mode not supported

[Marley]

yea you need change setting when you get picture

[Marley]

thats why hdmi wont plat need do it when you get picture

[Digitaldan]

Just reset the box. Unplug box. Press and hold menu button on remote and continue to do so as you plug box in. That will take you to the BIOS. Change what you need to there and save. Reboot box and should be good to go. I have done that a few times to solve the same problem when I was first learning this game in the beginning. Make sure while in the BIOS that box is set to "Boot from NAND".

[Marley]

like he said he got a picture all he need to do was change the video setting and reboot and plug in hdmi he had it

[Digitaldan]

I know that. All the settings can be access through the bios weather you reset the box or not. In the bios the video is in a default mode and you can see it no matter what video mode the thing got into. Then just tell it whatever mode for video you want and exit the bios. Takes two minutes max. No hassle. Done. I saw all these posts and simply wanted to share a short cut. Have a great day!

[brayden13]

Simple if u got picture with the RC just go to Video. In Video change the output mode to "auto" then under it change the resolution to 1280x720 hit save reboot the box and connect your hdmi again