New r19 firmware update - discussion thread

[Go Vegan]

The new r19 firmware update seems to be working good!
Hopefully this will solve the issues with american and uk channels going down after 4:00pm PST.

[382130]

they were still going down yesterday even after updating to R19

[satmam61]

Where did you guys find the r19 update? I went to the infomir site and couldn't find it

[crazed 9.6]

'Go to Inner Portal' option.
Then into the next Settings tab you will see there.
Then in there ensue it shows...
Autoupdate : With Confirmation
Update beta versions = On

Then use the green button on remote (update Manually).
Then with New Version slot highlighted, use the bottom left hand button on your remote (as pictured on that New Version slot). That function will bring up any and all versions available.

If not, then exit back to where the menu screen shows the 'Select a portal for loading'

It gives you chooses of Embedded Portal and your server URL portal and the System settings Portal
Go into Settings.
Then scroll the next screen down till you see the Software Update option.
Open that and it should show ..
Update Method : HTTP

URL : http://mag.infmir.com.ua/254/r2/imageupdate
New URL : http://update.infomir.com/mag/254/imageupdate

Then OK to verify....
Then Exit back out and into Embedded Portal and into Settings and back into Software autoupdate and the green button again.

[382130]

don't understand why it works fine in the morning but not at night. Other boxes (different makes) working fine.

[1969z]

What improvements if any????

[382130]

Just tried still no chance other boxes working fine

[crazed 9.6]

Changes in release 0.2.18-r19-254:

Kernel:
Added support for GPT partitions.

Player:
Added CEC support.
Fixed teletext rendering.
Fixed non-synchronous teletext subtitles.
Fixed long start of HLS stream without audio track.
Fixed TimeshiftPlayer plugin.
Fixed scan of "WPA/TKIP" WiFi networks.
Fixed SAMBA if network is connected after STB start.

Browser:
Fixed crash while trying to open link to m2ts file in internet browser.
Improved WiFi manager.

Embedded portal:
Updated Dolby logotypes.
Removed some audio settings.
Added MAGis Cast to main menu.


http://soft.infomir.com.ua/

[scorpion19]

with this update i now have two channels not fitting the screen it looks like they are zoomed in on the left half of the screen the channels are 209 msnbc hd and 434 NESn HD all other channels are fine can soeone give me an idea if its me or not i checked all settings and they seemed to be right can someone please help

[crazed 9.6]

I think the issue is coming from the server end of things Scorpion.
Some have reported same results with the Dreamlink receiver as well.

Should only be temporary

[buddy2017]

Watching Movie stops and starts back 4or 5 frames at times continuously. MAG 254 R19

[buddy2017]

It is obvious that the R19 is having issues ,one can always go back to R14 seems to work much better .Remember one does not have to enable software update .

[jjjackson]

What is CEC?

What will TimeshiftPlayer plugin do for us?

[chad1976]

They need cc

[Bkman2020]

r19 has magic cast, and now you can add your m3u channel list as well with out going to inner portal

[Turducken]

After trying r19 I went back to r14, Way more stability, Have tested this way for over a week

[Rinny]

turducken
What did you find on running the r19 file please..
Am running it no real problems here?

[Waylotul]

I'm running r19 on a new mag just to get a feel for it and it seems fast channel changing and doesn't crash out anything. I get reliable streams on most channels. Cant say I tested them all but I past a 72 hour burn in and so far stable.

[suncomkid]

How do you go back to r14? I saw it here somewhere but cant find it now that I need it......

[voodoo]

Hi everyone i updated my mag 254 to R19 firmwear and now id like to go back to R14 but it dose not give me that option any more u use to be able to in the past any help would be appreciated thanks

[Turducken]

On your Home Page scroll over to Settings Press Ok
-Scroll down to Go to inner Portal
-Press ok on Settings
-Press ok on Software Atuoupdate
-Now Disable the Atuoupdate using the right arrow Key on the remote
-turn off the Beta

-Now press F2 the Green button, you'll see the file in yellow read 0.218-r18-254 scroll to the right with the arrow key to
0.218-r14-254 then press F1 in Red on the Remote to update..

I used the above method to change back a few weeks ago, Thanks to Rinny

I decided to try R19 again and channel changing takes a long time to change so trying to change back to R14 but using above method but when I press F2 I get R19 update with no option of others,

Any ideas?? Thanks

[voodoo]

Have the same problem Turducken even went to infomir web site the only file they have is R19

[Turducken]

Is strange cause we cant be the only ones not liking R19, I went back weeks ago when seeing that programing was generally smoother and reports are ppl like R19 I thought I would try again.

[chad1976]

Changes in release 0.2.18-r19-254:

Kernel:
Added support for GPT partitions.

Player:
Added CEC support.
Fixed teletext rendering.
Fixed non-synchronous teletext subtitles.
Fixed long start of HLS stream without audio track.
Fixed TimeshiftPlayer plugin.
Fixed scan of "WPA/TKIP" WiFi networks.
Fixed SAMBA if network is connected after STB start.

Browser:
Fixed crash while trying to open link to m2ts file in internet browser.
Improved WiFi manager.

Embedded portal:
Updated Dolby logotypes.
Removed some audio settings.
Added MAGis Cast to main menu.


http://soft.infomir.com.ua/

Look good. But CC would be the also great some time. thx

[0431]

r19 has not thelped me out at all, everything still freezing and stopping and starting on both auduo and video.
Not good at all...any suggestions is good.