Infomir / Mag 254 reset

[rhrt]

I have done a cold reboot which I have done with previous success. I am getting no signal output from the HDMI and when changed to RCA/SD cable provided with the unit the video indicates " Output mode mismatch. Change to SD mode or use HDMI output". I have tried a cold reboot holding the menu button as directed in the reset instructions on this site, this method has no affect on the unit and pressing F1 didn't switch to PAL mode.

When booting up, the Infomir logo and video are present then screen goes blank indicating no signal. Is there a way to change the video settings under these circumstances?

[soldertech24]

Reboot box rapidly hit menu on remote as its rebooting your in bios mode change resolution from there.

[Marley]

just click a few times on Mag250 & Mag254 IPTV Box will bring you to sticky's next time lots great info

[isbar]

just click a few times on Mag250 & Mag254 IPTV Box will bring you to sticky's next time lots great info

Could you give me further information about your suggestion?. Thanks