How to integrate an EPG into PVR IPTV Simple Client using IPTV Stalker

[dataghost]

Does anyone else have a problem starting the m3u client and it saying - Server not started, try again in one minute

[node]

Dara, is this a typo, http://is.gd...org/ : http://ip...gd/. Also I was able to get the Simple Client to bring down the channels but no guide, on iSO DEVICE. I am running Kodi 14.2 and Stalker 1.18..

The is & ip?

[inferio07]

I cant seem to figure out what I should set the epg time to, I've been driving myself crazy for about an hour trying to set it properly but it's always incorrect, i stay in california, I'm 3 hours behind newyork, these channel's are eastern so I set it 3 hours ahead and it still isn't correct, can someone please help me?

[dataghost]

I can not get the stalker 1.18 client server to start, just keeps saying server not started. The guide drove me crazy from xmltvguide when it was originally running. I have just been using iVue since the guide is all correct etc

[psycon]

I cant seem to figure out what I should set the epg time to, I've been driving myself crazy for about an hour trying to set it properly but it's always incorrect, i stay in california, I'm 3 hours behind new york, these channel's are eastern so I set it 3 hours ahead and it still isn't correct, can someone please help me?

when using the is.gd links you need to set it to -7 in IPTV stalker (for Pacific time).. then purge your PVR and EPG Database from settings and restart kodi.
if using pvr.stalker, you do not have to set anything. - this is the reccomended client

[dara]

Dara, is this a typo, http://is.gd...org/ : http://ip...gd/. Also I was able to get the Simple Client to bring down the channels but no guide, on iSO DEVICE. I am running Kodi 14.2 and Stalker 1.18..

The is & ip?

Sorry, updated the tutorial.

[PrivatePilot]

Edit: Disregard post, it was a bad .xml file that was causing my never ending guide refresh issue. All good now. :)

[dara]

You might want to try the wizard for the iVue guide, which takes a more direct route to clean out the database. In the addon_data under userdata for script.tvguidetecbox, try deleting the the source5.db while Kodi is off.

[kizer8]

Hello All,

Not sure if this will make sense to all but wanted to ask. I am on Kodi Isengard 15 beta 1 and used this guide to integrate the is.gd/NFPSE EPG with the stalker 1.0.18 video addon and it's working good showing me a guide, etc...My Issue is: Whenever I watch any channel using this setup, I get audio to cut out on me every 1-3 min for a second or two and then stream continues... It's very frustrating since it's hard to watch anything when you miss what is being said. This happens constantly ever 1-3 min for a sec or 2...This does not happen when playing streams via Genesis, Phoenix, IceFilms, Pandora, Plex etc.., but only with this IPTV Simple client with stalker addon integration based on this guide. I am running a Matricom G-box Q android TV box. This also happens whether I route sound through tv speakers or a home theater via digital optical out. If this is not the correct forum/thread please let me know what I can post this for help. Anyone know why this is happening or how to fix?

[dara]

I would test IPTV Stalker first to see if you have any issues with that first. If you don't, try connecting it with the PVR simple client without the guide link to see if that's the issue. If there is no issue, the issue maybe with the remote access of the guide. As Kodi 15.0 is still a beta, it could be the built-in PVR is not working just right too.

I recommend testing the PVR Stalker 0.8 if using Kodi 15.0, which won't rely on as many moving targets as this integration. Since there are problems with the Kodi Android installed stalker not properly updating, you probably would have to use the bundled version of the Kodi with 0.8 in the pvr stalker thread or the EPG Grabber thread. I could understand why you may not want to start with a fresh Kodi, as its not easy to back up your installed add-ons/settings without diving into the file structure, but it may be worth the effort.

[rjpala]

Newbie question, but is this supposed to add playable channels or just the epg metadate etc? How do I add playable channels to it?

[dara]

Just the EPG.

[danlevin]

does someone else have problems since this morning in the epg??
until last night it worked great , but now the epg is loading very slowly and eventually not even showing

[kizer8]

does someone else have problems since this morning in the epg??
until last night it worked great , but now the epg is loading very slowly and eventually not even showing

Yes, I also am having issues since yesterday afternoon with guide not showing using the is.gd link with simple client integration..

[woodtearl]

Yes, I also am having issues since yesterday afternoon with guide not showing using the is.gd link with simple client integration..

I am also having same issues.

[kizer8]

I am also having same issues.

Strange, but using the stalker PVR client 0.80 in Isengard instead of simple PVR client integration with stalker video addon loads the guide just fine from the is.gd link

[psycon]

hmmm. i think the changes to the dummy channels may have broken something I'll revert the change for now.

update. reversion solved the issue. you should see guide data again now.

[Blackbear199]

just tried and got guide working with stalker client and simple client.was using stalker but when I switched to simple no guide.purged database few times and same.exited kodi and deleted epg and tv files from database in appdata and it loaded.no channel icons though.switching back to stalker.i pull the epg myself with ur latest files(dummy ones incl) but shudnt matter.

[PrivatePilot]

OK everyone, another few questions. The guide has been working GREAT for me, huge thanks to the authors.

1/ Is it possible to add additional channels? I have a few additional local Canadian channels I'd like to add to the guide but it's not evident how. I like everything that's there, I just want to add to it, not totally re-do it.

2/ Some channels present multiple source options the first time you select them, however on subsequent selections it seems to automatically go with whatever your choice was the first time you selected the channel. Is it possible to un-do this selection to select the alternate source? Reason being - at least one of my channels has gone dead on the one source, but the other is still working...but iVue automatically selects the dead stream everytime I select this channel now.

Keep up the good work, thanks again!

[psycon]

ivue uses its own data source. different than the one dara and I maintain.. You cant add to the iview one, but your welcome to download my grabber and modify it as you willl..

your going to want to learn how to use mc2xml and take a look through the bat file i created.. if you fix the canadian grab by all means share it, but no support will be given for people wanting to modify it, you need to figure it out on your own.

[dara]

PrivatePilot, you must be asking about the iVue guide, and this thread isn't about that. Anyway, you can't easily add channels to that guide. If you want to make a change to which source is selected by that guide, highlight the channel, and either hit 'c' on your keyboard, right click with a mouse, long press on the channel if using a tablet or use the menu button on your remote to bring up the context menu, and you'll see 'Remove Stream'. Click on that, and then do that again to 'Select Stream'.

[PrivatePilot]

Thanks for the reply. Sure wish there was a way to manage/add channels within the guide software itself, is that something that could be considered for future versions or is there a techincal reason behind why none of the Kodi guide options seem to implement such a feature? It looks like the mc2xml route is beyond my confort/technicality level unfortunately.


Sorry for the iVue specific questions...seemed like (based on some of the thread read) there was some iVue technical questions being asked and it had leaned that way at a few points. Is there a better thread you could point me to? ;)

Thx again

[sneakk]

getting very slow load times for EPG since yesterday, i tried resetting pvr data base and resetting EPG database, i even changed it to only load NFPSE, any reccomendations?

[webguy0822]

Same thing... EPG not loading, did both resets...ideas??

[Roach46]

Mines loading the epg, but it takes 20 miniutes

[sneakk]

thats about the same for me Roach46

[nonpublished]

Is there anyway to Disable and Enable this after each reboot? I found a shortcut that is working, but I know with the developers here that must be an automated approach.

I was having to go in and find the PVR client after each reboot, then Disable and ReEnable the Client to get the TV channels to load.

I installed Super Favorites "https://github.com/spoyser/spoyser-repo/raw/master/zips/repository.spoyser/repository.spoyser-1.0.6.zip"
This allowed me to Right Click on the IPTV Simple Client and Save to Super Favorites, Then I went to Super Favorites Folder, then Saved that to KODI favorites.

This allowed me to have one click access from the main Kodi Menu, directly to the PVR folder, where I can disable, and enable the IPVT Simple PVR Client

Anyone else have any better solutions to Disable and Enable this client after each reboot?

Some code in the Settings, to auto Disable and Enable upon Kodi Start would be a quick fix?

Thanks
I am new to Kodi and may be overlooking a method to make this process simpler to get the Live TV to work automatically on each reboot.

[sneakk]

Nonpublished go to system select live TV and make sure it is enabled.
System
Addons
Enabled or disabled addons which ever applies
Pvr clients
Simple pvr
And enable or disable whichever you're looking to do

[sneakk]

Mines loading the epg, but it takes 20 miniutes

i take that back, mines appears as if it is loading for about 20 minutes, when i open either channels or EPG i have no other information than the channel

[danlevin]

i take that back, mines appears as if it is loading for about 20 minutes, when i open either channels or EPG i have no other information than the channel

mine too, it worked 2 days ago and again not working

[littlepr]

Guys, psycon was out for the weekend. The epg had not been updated on his epg grabbed git page. He said he will get it up and running with updated .xml. Patience is a virtue...lol.

[olsts]

Newbee for EPG using Stalker. have an Android MX III box, using XBMC. Did the setup as per first thread from Dara. EPG is loaded, channels list there, however no video or audio on any channels in Live TV. Tried other channels cannot see video or audio.
When using stalker in Video Mode channels are working.
Confused about Mac address, what do I use, Box MAC address, dara first six digits, or none

[kizer8]

Anyone having issues loading stalker channels today via 1.iptvprivateserver.tv? I get unable to load channels popup error on Kodi 15.0 with stalker 0.8.

[kizer8]

Anyone having issues loading stalker channels today via 1.iptvprivateserver.tv? I get unable to load channels popup error on Kodi 15.0 with stalker 0.8.

Everything working OK today.

[fire captain]

HOWTO-Integrate-EPG-into-PVR-IPTV-Simple-Client-using-IPTV-Stalker Video
https://youtu.be/5d8sk_dipHY

I did that and is great i get the channels showing in my live tv but when i click on a channel it says working but the channel never comes up any help would be graetly appreciated i know im close been working on this for 2 days,,

[olsts]

Same problem has FIRE CAPTIAN Has per my Last POST June 8TH. Anyone going to give some answers(psycon)maybe Using IPTV Stalker and Simple Client PVR. have an Android MX III box, using XBMC. Did the setup as per first thread from Dara. EPG is loaded, channels list there, however no video or audio on any channels in Live TV. Tried other channels cannot see video or audio.
When using IPTV stalker in Video Mode channels are working.
Confused about Mac address, what do I use, Box MAC address, dara first six digits, or none

[dara]

For those who are using IPTV Stalker as the server for the simple client, make sure that you can get channels from that first. If you can't, and have checked your settings (Correct server url, and MAC, using 00:1A:79:xx:xx:xx, where x is a hex-digit (0-9, A-F), and the server is on), clear the cache by going into the context menu where you see NFPS (menu button, "c", or right click).

If you are not on Kodi (14.0 and greater), the IPTV Stalker shouldn't work. Also, if you are still having trouble with channels, always try resetting the PVR and guide/EPG, and disabling/enabling Live TV. Also, remember that this server is in test mode. That means that its common that your favorite channel may not be up when you want it the most (i.e. right now). If you are seeing other channels, that just means that current channel may not be up. If its global, do a little reading to see if others are having issues, especially those who have yellow or blue letters for their usernames.

Those who can, upgrade to Kodi 15.0 beta, and see if PVR.Stalker (0.8) is better for you. Upgrading to 15.0 may not be the right thing if you aren't secure in your Kodi skills and can't bear that a favorite add-on no longer works.

[Cu Nguyen]

When the test mode is over.Is the iptv stalker still working?If not I believe we need to buy the donation?If it's still working.Will it have more working channels than now?

[DarkSide]

When the test mode is over.Is the iptv stalker still working?If not I believe we need to buy the donation?If it's still working.Will it have more working channels than now?

you still need an active donation when the test mode ends

[olsts]

dara, what do we use for the last 6 Mac numbers, random hex, numbers or last six of our box MAC.
What is the correct server URL to use

[DarkSide]

dara, what do we use for the last 6 Mac numbers, random hex, numbers or last six of our box MAC.
What is the correct server URL to use

i would use the last 6 of your device but random also works

[dataghost]

Is anyone else having issues with stalker connecting in simple iptv pvr, it only seems to connect once, disable pvr and reset settings and re-enable, than after that if i were to close kodi and restart I need to go through the process again. Any fix for this?

[dara]

Is anyone else having issues with stalker connecting in simple iptv pvr, it only seems to connect once, disable pvr and reset settings and re-enable, than after that if i were to close kodi and restart I need to go through the process again. Any fix for this?

No, its doubtful there will be a fix for this, as the different components in the chain of events don't always occur in right order. IPTV Stalker is only relaying the connections between the NFPS middleware and the PVR client in Kodi. If you can upgrade to Kodi 15.0 beta, the PVR Stalker eliminates the "middleman' and even though the connect may not always work right away, you don't have to do as much to do to get it going.

[snuffy47]

I am getting an msg IPTV Stalker Http Error 404 not found when Kodi searches for channels or when I try to run the IPTV Stalker profile in video addons

Update: Using AFTV and Kodi Helix

Installed the emulator apk and added the profile in the amazon home section. It seems to pull channels there just when I am trying to configure in Kodi it donnt want to work ;(

-----------Update----------

Well gave up on AFTV and went to my AFTV stick

I downloaded file in Method #3

http://forum.xda-developers.com/fire-tv/general/configure-iptv-fire-tv-watch-live-tv-t3025765

Then proceeded to follow the How To in Post #1

Things seemed to work but I did not change the URL in portal 1 added Mac and Enabled send serail.. There was a default but was different the 1.iptvprivateserver.tv. It was http://xxxxxx.iptvprivateserver.tv

Is this correct? If so I will proceed to complete on AFTV box :)

[wliat]

Hi,

My setup:-

1. Android Box - Himedia Q5
2. Kodi 14.2 Helix
3. Iptv stalker version 1.0.18
4. PVR IPTV simple client version 1.9.12

I cant get the m3u server to start. When i click on start i get an error msg "server not started. Try again in a moment"

I have follow your guide on my PC windows 8.1, My android phone, and my android tablet all of them work except on my android box (above) which is connected to my TV.

Any help is very much appreciated.

[xbmcbg]

In your case you need stalker 0.8. not 1.0.18

[wliat]

Means I need to download kodi isengard beta.

Just i dunno why my iptv stalker add-on m3u server unable to start. Sigh.

[OVNI67]

Hi everyone:
Does the configuration in the first post work for a MAC computer running OSX10 Yosemite?
I have performed this configuration in many Windows computers, but in this MAC has been impossible to me. The error that I receive is : URL Timeout .... after configure the IPTV Stalker, when I launch it, I get the different categories, but when I click ALL, I receive that error several seconds after. I'm not as expert using MAC as I'm working with windows. Including, I added a folder with many logos of the channels, but in windows.
Please, has someone had this problem before? Any idea?
IMAC mid 2008, running OS X 10.10 Yosemite
Running Kodi 15 RC1 (I started using Helix 14.4, later Insegard Beta2, and I had the same problem)
I'm using Video plugin Stalker v1.0.18, and PVR IPTV simple client
I have another computer with windows here working perfect. Please again, I'll appreciate any idea. Best regards

Rudy

[OVNI67]

I'm sorry, I apologize, the error that I receive is : "Url open error timed out".

Thanks

[dara]

In IPTV Stalker settings, try resetting to Default, with no MAC. If it doesn't work there, enter a valid MAC and try it again. It could be that Kodi isn't resolving the url also, make sure your other add-ons are up-to-date.

[contentryder]

Instead of NPFS, what is the URL remote path needed for Rocket setup?

[big dady]

Instead of NPFS, what is the URL remote path needed for Rocket setup?

1.iptvrocket.tv

[dopeysd619]

is this not working anymore? i did a fresh install on my system and set everything up again and now cant read the files on pvr simple client am i doing someting wrong or did it stop working in this way as of the 15th? thats when mine stopped working with pvr simple client

[rdb0118]

First, did you pay for a donation? Do you have the timeout in settings to 75 for the timeout? Also are you using pvr stalker or simple client?

[rdb0118]

Also, what version of Kodi did you install?

[dara]

c/p from neat-
http://iptvtalk.net/showthread.php?5783-IPTV-STALKER-ADDON-(-not-client)&p=46415&viewfull=1#post46415

It's accurate:




Need to start with live tv disabled.
Download stalker master zip file, or source it from a repository (you can search this one on google or this forum for locations to get the addon), either way, get stalker video addon installed.

Now there are two addons ONLY that need to be configured. IPTV stalker (video addon), and PVR IPTV simple client (PVR client).

The PVR IPTV Simple client has absolutely nothing to do with your rocket or MAC address and is already inKodi 15.0. It is a pointer to your local host port 8899 and portal 1 and it gets you your EPG from is.gd.

So the URL in there should be http://localhost:8899/channels.html?portal=1. Note, portal = 1, stalker provides a few to be defined, just configure portal 1, leave they others alone. The next item to configure in the PVR IPTV Simple Client is the EPG. URL is http://is.gd/NFPSE. Set your time shift and save it and close the window. That's it for that. Don't touch it again afterwards...just make sure it's enabled....lol

Now, configure your IPTV Stalker video addon. This one your gonna use either portal.iptvrocket.tv (if your using a rocket), or portal.iptvprivateserver.tv (if your using NFPS) as your URL....not the 11.version. Or the 1.version.......it's portal.

Add your specific MAC address... It must begin with 00:1A:79...then add three more pair from you machines actuall MAC address (00:1A:79:xx:xx:xx). This MAC address MUST match exactly what you added to your donation. Caps don't really matter, but do it anyway. ..... That's it for that.... Your done here too. Save it and close the window....make sure it's enabled.

Now, make sure they are both "Enabled"......
Lastly, go to the "Live TV" general settings and "enable" it. You should see downloading of the EPG in the top right and in the lower right you should see something like "IPTV PVR Client loaded 722 channels" notification. The TV category should appear.

If you don't..... Then try disabling and re-enabling live TV...or, closing and re opening Kodi.... And if needbe, dig into it by clicking video....video addons... IPTV Stalker....NFPS...entertainment and try a channel... If it works your good. Close Kodi again and reopen... It should load up.

Sometimes, it will hang while loading and the TV category will not appear. You'll see this if in the top right, loading EPG it's taking forever and not progressing and/or if you don't see a notification that the PVR client loaded channels in the lower right. If this happens, you'll have to force Kodi to close. Open it and race (before the EPG begins to load in the top right) to disable live tv through the general settings tab. Then reenable it and it should load.

Hope this helps a few folks get up and running and doesn't confuse anyone... I tried to put it straight and simple...

Don't mess with anything else until you get your rig working though. These two addons are they only setting that need to be altered from a fresh install to get your tv working.

[Hustler]

Guys,

I'm having issues with the EPG timing using NFPSF. The EPG guide seems to be 1 hour off. I've changed the Time Shift on IPTV Simple Client to -1 hours however that hasn't made any difference at all. Also tried changing to -2 hrs, +2 hrs, + 1hr etc along with clearing the cache but the timing still remains unchanged - i.e. changing it in the settings has no effect.

I have also tried the Daylight savings link (NFPSFD) but still the time remains exactly the same.

I'm not sure if the Time Shift setting in IPTV Simple Client is working and would appreciate it if anyone can tell me how I can shift the EPG time to -1 hour.

I live in the UK.

Thank you!

[dara]

The time shift should be +1. It could be that the data itself is off, but the grabber is coded to pull for UTC, so I don't think it's the grabber itself. Try clearing the cache at the TV settings page then the guide page as well.

[Hustler]

The time shift should be +1. It could be that the data itself is off, but the grabber is coded to pull for UTC, so I don't think it's the grabber itself. Try clearing the cache at the TV settings page then the guide page as well.

Thank you so much Dara, I set the time shift to +1 and it worked. I've tried +1 many times before but it has never worked. For some reason, with your magic blessing it's worked! Now I can finally see the correct EPG information shown instead of being an hour behind :) Thanks once again ;)

[dara]

Make sure your Settings level is at Advanced or Expert. On the TV-Settings page, go to Guide tab and clear data/cache there as well.

Kodi 14.2 clears data differently than Kodi 15.0

[Teachme]

When trying this out my channel numbers aren't. In the right order and my guide isn't loading. Any ideas

[Reda]

I have iptv66, is it the same settings for PVR client like : http://is.gd/NFPSE ..... or di I need to change anything ??

[mephasor]

the link you posted does work right now. Well it works, but many channels missing. They are working on it. But for now you can use the file from this thread (http://iptvtalk.net/showthread.php?6243-Kodi-NFPSE-xml).

[apun]

I am using Stalker on Kodi 15, bot for some reason only is.gd/nfpsf works for me, Tecbox and ninja links all do not load epg at all, which one is the most complete one for nfps ?

Also I do not have EPG for the new South Asian channels 612-693 using is.gd link, do the other 2 lists have that or anyone working on them?

[dara]

id.gd is retired. nfpsf.********** works, but you may have to clear data, and also put http:// in front. That version is our most complete version, it doesn't have the dummy to fill in the rest of the channels yet.

Currently there is no on-going work on the new India channels guide, we'll do it if there is a demand, (and of course, there is), but it may be a while because there isn't a good mc2xml source for them. Make a request in the xmltv development thread, it may take a lot of work though.

[apun]

id.gd is retired. nfpsf.********** works, but you may have to clear data, and also put http:// in front. That version is our most complete version, it doesn't have the dummy to fill in the rest of the channels yet.

Currently there is no on-going work on the new India channels guide, we'll do it if there is a demand, (and of course, there is), but it may be a while because there isn't a good mc2xml source for them. Make a request in the xmltv development thread, it may take a lot of work though.

Thanks Dara , after several kodi restarts, epg loaded.

[fakemail]

Hi everyone,
I'm getting problem with PVR Simple Client integration with IPTV Stalker (1.0.18). I set up Simple Client, it loads channels and EPG but the channels are working only for some time, when I start a channel it plays, I can watch different channels. But after a while channels won't start, there is loading icon for a while but it just doesn't play, no errors showing up. I have to close Kodi and run it again or restart M3U server to get it working but again for some time. It's verry annoying. I tried to restart M3U server, clean cache, nothing works. IPTV Stalker works perfectly fine.

[me2downhere]

ok ive tried the h**p://nfpsf.********** and the importing guide from clients is still at top just says golden is there someting im missing maybe a /after ninja will that make it work or load

[dara]

It's not instantaneous. You may have to wait a minute or two before it loads. If the epg still doesn't load, disable TV, and clear data, and enable TV.

[me2downhere]

k thanx it just came up but the time is wrong hopefully i can figure it out

Sorry I got it figured out time zone on the firestick LOL thanx for the quick reply

[earldev1]

Hi guys thanks for all the help. My problem is channele are loading but no info on the english channels the other channels have info.

[dara]

English epg pull is currently showing no program data, so the issue isn't on our side... its at the source.

[HJGYUIO]

Anyone know a compatible url for showing channel logos?

[OverrRyde]

Hi guys, great guide!

Followed it and was able to set it up, it finds 877 channels loaded. However, it gets stuck on loading bar with "CBS New York" displayed, then nothing happens and the bar goes away. When i go into TV in Kodi, i see all the channels but no EPG.

If i restart Kodi, all i see is "Loading channels from clients" but nothing happens either.

Any help?
Thanks!

[HJGYUIO]

Hi guys, great guide!

Followed it and was able to set it up, it finds 877 channels loaded. However, it gets stuck on loading bar with "CBS New York" displayed, then nothing happens and the bar goes away. When i go into TV in Kodi, i see all the channels but no EPG.

If i restart Kodi, all i see is "Loading channels from clients" but nothing happens either.

Any help?
Thanks!

What epg url are you using?

[OverrRyde]

What epg url are you using?

I tried http://nfpse.********** and http://nfpsf.**********

I did manage to get them loaded actually and it did work, but still not getting the actual EPG (guide), i only get the channels with the program but i cannot get an actual tv guide

[HJGYUIO]

I tried http://nfpse.********** and http://nfpsf.**********

I did manage to get them loaded actually and it did work, but still not getting the actual EPG (guide), i only get the channels with the program but i cannot get an actual tv guide

I recommend using this:


http://**********/NFPSE.xml

Also I switched from iptv simple client to pvr simple client. All the logos and stuff are included.

[OverrRyde]

I recommend using this:


http://**********/NFPSE.xml

Also I switched from iptv simple client to pvr simple client. All the logos and stuff are included.

Will try that tonight.

I haven't used PVR Stalker because i am on Kodi 14 on OpenElec, there is not a stable release for Kodi 15 on OE yet. I know it works on 15 because it tried it on my windows laptop and i do get full EPG guide with PVR.Stalker, it's just Simple Client under 14 that does not provide a full EPG.

[OverrRyde]

I recommend using this:


http://**********/NFPSE.xml

Also I switched from iptv simple client to pvr simple client. All the logos and stuff are included.

Hi there, i tried the new EPG link but still no luck. The channels load but no EPG.

If it matters, i am using, IPTV Stalker and not PVR.Stalker as i am on OpenElec and there is not PVR Stalker for openelec.

Any other ideas?

Thank!

[HJGYUIO]

Hi there, i tried the new EPG link but still no luck. The channels load but no EPG.

If it matters, i am using, IPTV Stalker and not PVR.Stalker as i am on OpenElec and there is not PVR Stalker for openelec.

Any other ideas?

Thank!

What portal url are you using in IPTV Stalker? Did you add your MAC donation info?? It should start with:


00:1A:78

Once you enter all your settings, go into SYSTEM....then SETTINGS ....then TV....reset the PVR and EPG database. Exit and restart Kodi.

After restarting it may ask you to turn on IPTV Stalker. Go into settings and enable IPTV.


Just FYI, before switching to PVR Simple Client, IPTV Stalker was giving me problems with the TV guide loading too.

[OverrRyde]

What portal url are you using in IPTV Stalker? Did you add your MAC donation info?? It should start with:


00:1A:78

Once you enter all your settings, go into SYSTEM....then SETTINGS ....then TV....reset the PVR and EPG database. Exit and restart Kodi.

After restarting it may ask you to turn on IPTV Stalker. Go into settings and enable IPTV.


Just FYI, before switching to PVR Simple Client, IPTV Stalker was giving me problems with the TV guide loading too.

Thanks for your help HJGYUIO.

Im actually not having any issues with IPTV Stalker, all settings are correct fort portal IKS66 with correct mac setting and route/donation. I am able to load channels in stalker no problem. Channels also load when i go into TV in Kodi and i see what program is playing, its only when i select Guide in TV that i dont see the EPG. If i do select a channel and then do the fuide within the show i am watching, then i can see the EPG for other channels.

Im not sure if that all makes sense, but i hope it does lol

Thanks!

[HJGYUIO]

Thanks for your help HJGYUIO.

Im actually not having any issues with IPTV Stalker, all settings are correct fort portal IKS66 with correct mac setting and route/donation. I am able to load channels in stalker no problem. Channels also load when i go into TV in Kodi and i see what program is playing, its only when i select Guide in TV that i dont see the EPG. If i do select a channel and then do the fuide within the show i am watching, then i can see the EPG for other channels.

Im not sure if that all makes sense, but i hope it does lol

Thanks!

Ok...just checking but when I was using IPTV Stalker....the TV guide was not working for me either. Or if it did work, it was for half a day then disappeared. Very unstable.

[debug337]

Has anyone figured this out yet ? I'm not too sure where to start.

[meluvalli]

I assume EPG is down again? I tried all the links provided on first page and all are blank.... (with the exception of the first link, I get a 404 Error)... Is this a known issue? Or maybe it's down during certain hours for updating?

[georgec]

Nothing on EPG here either. Anyone know if it's down?

[HJGYUIO]

I think they are working on the EPG list because there have been channels added. There are now 910 channels in total so I can only assume that the EPG list needs to be updated.

[zeit]

I have been trying to use hxxp://**********/NFPSFD.xml EPG, but for some reason it does not load.
Any tips?
I have been trying it with IPTV Simple Client, it does load the channels but not the EPG, i have also tried clearing the cache an restartin Kodi-
Thanks in advance

[rambopn]

it seems to working fine on this end.

[Lohocla]

Im only getting 1 channel loaded with a 404 error. Info on first page still good? Im using stalker o.8.3
I.have a :79 mac with 11. server and see it says portal. is the one to use. Im going nuts for figuring this out.
Stalker Client is awesome but the 5 hours ahead thing is killing me. Been trying to integrate all day

[azeoeko]

Does anybody have an updated epg guide for pvr simple client or ivue gudie or renegades for the latest IPTV stalker line up?

From top to bottom......India to Greece and everything in between so we dont have to sit there and manually choose streams or get these half guides?

Also to include all the logos?


By doing this:
http://localhost:8899/channels.html?portal=1

and this
http://nfpsf.**********/NFPSF.xml
or
http://**********/NFPSE.xml (English only, for a quicker load)

Non-daylight-savings:
http://**********/NFPSFD.xml
or
http://**********/NFPSED.xml

Dont have full guides.

Im looking for a working epg for ALL category within iptv stalker.

I have spent days and Im about to break my kodi box.

Please assist.

Thanks

Im using:

plugin.video.stalker 9.0.21 - NFPS.zip

Im getting all the channels through iptv stalker but guides are not full.

[cmndodhruv]

azeoeko, This (http://iptvtalk.net/showthread.php?4483-How-to-set-up-pvr-stalker-with-NFPS-and-have-a-Full-EPG&p=77900&viewfull=1#post77900) worked for me.