new URL for iptvprivateserver

[John]

I put new URL( http://p1.iptvprivateserver.tv/c/index.html ) in place of ( http://portal2.iptvprivateserver.tv/stalker_portal/c/index.html ) but still get stalker failed do I have to change something else No tv

[boomer020]

I'm having the same problem. I've also tried changing my mac, doing a itv reset, changing portal, and removing the /c/index.html with no success. It would be nice if someone could post a step by step on how to get this thing working again.

[rdb0118]

Try setting the timeout to 120, clearing the cache, and restarting kodi. That's what I did and started right up and working fine.

[82harley]

I put new URL( http://p1.iptvprivateserver.tv/c/index.html ) in place of ( http://portal2.iptvprivateserver.tv/stalker_portal/c/index.html ) but still get stalker failed do I have to change something else No tv

Not sure cause I already changed my portal and it went to portal4, but if your portal is 2 your new portal should be http://p1.iptvprivateserver.tv/c/index.html

[rdb0118]

I was on portal 3 and set it to p1 with no issue. Maybe try p2 since you were originally set to portal 2. In papio it still shows me on portal 3.

[ilan]

No, on the two previous posts. Currently, there is only one, new active portal for NFPS. The previous NFPS portals 1 and 2 BOTH redirect to (or should be directed to)



http://p1.iptvprivateserver.tv/c/index.html

[floder2]

I have Potato-TV set up with p1.iptvprivateserver.tv .....not using the http:// or /c/index.html .......Im also using the Mac linked to the donation........working fine except VOD does not play the videos

[zeno]

Portal 3 has officially been redirected to P1 now.

[floder2]

So in the potato tv configuration ..........when selecting stalker portal .........there are 3 choices ....I chose p1.iptvprivateserver.tv .................................................. now is it really http://p1.iptvprivateserver.tv/c/index.html ....but the choice does not show the whole URL ..???

[dara]

I haven't looked at his code, but he figured out how to send the portal URL in the right format, and the add-on should do that for you. The Custom is meant for the special situations.

[ilan]

So in the potato tv configuration ..........when selecting stalker portal .........there are 3 choices ....I chose p1.iptvprivateserver.tv .................................................. now is it really http://p1.iptvprivateserver.tv/c/index.html ....but the choice does not show the whole URL ..???

If nothing is specified after the /c/, the server "understands" it should serve what is considered the "homepage" or index[.]html

[dotsadie]

I put the new URL in my g-box and it started to work except for the picture not centered,auto way out off picture, a lot of channels did not work and now it comes up saying (stalker failed retrying). What the H is going on with this? Using ITPV NFPS on a matricom android.
Thanks Dotsadie

[pod77]

I put the new URL in my g-box and it started to work except for the picture not centered,auto way out off picture, a lot of channels did not work and now it comes up saying (stalker failed retrying). What the H is going on with this? Using ITPV NFPS on a matricom android.
Thanks Dotsadie

There is a post I have been looking for on the board that was just posted in the past couple of days that had a similar issue and they changed a couple of settings and it fixed the issue. I have been searching and haven't found it yet. If I can find it I will link it to this thread for you! I believe that they changed the acceraration settings and it fixed the issue. Let me see if I can find it for you I know it's someplace ;)

[Jeeja Gee]

sorry folks,
looks stupid Question, but whats new url for
Mag254
Avov
DreamlinkT1

[pod77]

I put the new URL in my g-box and it started to work except for the picture not centered,auto way out off picture, a lot of channels did not work and now it comes up saying (stalker failed retrying). What the H is going on with this? Using ITPV NFPS on a matricom android.
Thanks Dotsadie
Hi again you could try this to see if it helps, unfortunately I use the STB emu on my gbox but here is a post I found that might be worth a shot to trouble shoot what's going on with your box:
Posted by Autoroam;;
"Im on the PVR Stalker Client in Kodi 16.1 on a Minix box. Im still have my MAC from months ago.
My channels wouldn't load after I upgraded my Kodi from 15.2. All I did was change the server
address to the new one, and disable the 3 acceleration settings under system/video/acceleration
and it is all working.

The EPG from yahyabell acts up sometimes…it may load or not depending on your luck. And some channels
go off then come back on. That's about it.
something here"

And to be honest I can't wait to get rid of my matricom box.. It's 3 years old and slow as death compared to some newer boxes. Have you thought about getting a new box anytime soon? What model do you have??

[dotsadie]

Thanks pod77 it worked and my machine is about 3 years old and i do have two other newer machine. Thanks again Dotsadie

[jsrefrig]

I was 3. I changed it to p1 and now it says ---page loading error?

[ilan]

I haven't checked yet, but this was reported in another server area, so there was likely an issue at the server at that the time you tried to access the channels.

[billy g.]

mag 275 working now after new url change using 2.iptprivateserver on portal 2

[Linclon]

Where u get the addon for iptv stalker plus from i cant find the url.

[dara]

Where u get the addon for iptv stalker plus from i cant find the url.

Did you look in the IPTV Stalker forum? Anyway, IPTV Stalker and direct variants will soon be non-working, there are other options that will get you IPTV and VOD that don't require MAC authentication, including Potato TV, Xtream-Codes IPTV, Playlist Loader and other non-Kodi apps.

[greatg]

Any update as to weather the other servers (ie 4) have been updated? I tried the new url and kept getting server error. I'm using Kodi 17.

[John]

Got it to work had to change and reset MAC address loaded fine new Ural

[John]

not working again getting Authentication failed unknown error

[John]

I give up been here long time will take the loss and move on

[John]

I give up been here long time will take the loss and move on

Ok were do I go to make my donation work again have read and tried most everything but spinning my wheels p1.iptvprivateserver.tv/c/index.html

[expatter]

I need some help please. My portal is 4 but it stopped working last week. I've tried on android and windows, kodi 16 and 17 and no dice. Have reset countless times already. Did a portable install of kodi to test with and no dice on virgin install. I also tried the playlist and that worked for 1 day last week but now it doesn't work at all.

What should I use as a url for portal 4 since p1 clearly does not work for me? Any help is appreciated.

['chasing...]

i think we're all using the same portal since the upgrade.. the p1 was working at 3:30 in the morning, but hasn't worked except for the VOD since i got up @ 10am...

[ilan]

NFPS is back up now... Expatter, give it another try. It may have been down when you were trying.

[expatter]

NFPS is back up now... Expatter, give it another try. It may have been down when you were trying.

Hi Ilan~Nope, still not working for me. I changed the portal to 3 on papiao and also reset. No dice. Tried using the playlist again and vlc cannot open the files. I had saved the playlist that worked in perfect player last week, so I can see all of the links. It seems that even though the website shows my donation is active and current, there is something that is stopping these files for actually playing.

Kodi log shows that there is no handshake for pvr. If I try potato it throws a strange error about attribute and some others that I couldn't troubleshoot. Actually, when I look further into potato I see where it makes 2 directories: 1 for IPTV channels and another for VOD. IPtv is empty but VOD shows all of the movies. So it would appear that something is amiss with my donation. Suddenly my donation appears to be dead...

When kodi starts up, the pvr is loading channels and it looks like it is going to work but loading message stays on screen for several minutes and then authentication error appears x 2. Today is day 6 with no NFPS pour moi.

I also tried changing my mac which has always worked with my birthday for 2 1/2 years.

I tried with:

hxxp:/p1.iptvprivateserver.tv
hxxp:/p1.iptvprivateserver.tv/c/
hxxp:/p1.iptvprivateserver.tv/c/index.html

All no workie

What's it all about, Alfie? :confused:

[dells]

Hi Ilan~Nope, still not working for me. I changed the portal to 3 on papiao and also reset. No dice. Tried using the playlist again and vlc cannot open the files. I had saved the playlist that worked in perfect player last week, so I can see all of the links. It seems that even though the website shows my donation is active and current, there is something that is stopping these files for actually playing.

Kodi log shows that there is no handshake for pvr. If I try potato it throws a strange error about attribute and some others that I couldn't troubleshoot. Actually, when I look further into potato I see where it makes 2 directories: 1 for IPTV channels and another for VOD. IPtv is empty but VOD shows all of the movies. So it would appear that something is amiss with my donation.

When kodi starts up, the pvr is loading channels and it looks like it is going to work but loading message stays on screen for several minutes and then authentication error appears x 2. Today is day 6 with no NFPS por moi.

I also tried changing my mac which has always worked with my birthday for 2 1/2 years.

I tried with:

hxxp:/p1.iptvprivateserver.tv
hxxp:/p1.iptvprivateserver.tv/c/
hxxp:/p1.iptvprivateserver.tv/c/index.html

All no workie

What's it all about, Alfie? :confused:

your url is missing the double forward slash // after http, I only see one forward slash in the url's you posted that you tried, should be hxxp://p1.iptvprivateserver.tv/c/index.html, not sure if your aware of this but worth mentioning as that error will stop you from connecting

[expatter]

your url is missing the double forward slash // after http, I only see one forward slash in the url's you posted that you tried, should be hxxp://p1.iptvprivateserver.tv/c/index.html, not sure if your aware of this but worth mentioning as that error will stop you from connecting

My bad for omitting them in the post (I'm a bit cross-eyed at this point). I do have double slash marks in my setup tho.

Tks

[ilan]

I haven't played with the playlists. I just replaced my old URL with the new URL in PVR Stalker client, did an IPTV Reset and was off and running.

If your account shows active in the Donation Checker, it should be good to go.

Some folks added only the MAC and donation number (as username and password) in PVR Stalker and it worked.

You realize to get and use the playlist you have to eliminate your MAC address at the Donation Checker, correct?

[expatter]

I haven't played with the playlists. I just replaced my old URL with the new URL in PVR Stalker client, did an IPTV Reset and was off and running.

If your account shows active in the Donation Checker, it should be good to go.

Some folks added only the MAC and donation number (as username and password) in PVR Stalker and it worked.

You realize to get and use the playlist you have to eliminate your MAC address at the Donation Checker, correct?

Yes, I realize with playlist there is no MAC. I tried the playlist out last week and it worked for 1 day.

So no more SN or ID, ID!, Sig?

[ilan]

Yes, I realize with playlist there is no MAC. I tried the playlist out last week and it worked for 1 day.

So no more SN or ID, ID!, Sig?

I have them, and things are working fine, as I mentioned previously. A few people reported their set-up was working without them. It might be worth trying it without them if things aren't working otherwise.

[ashyman]

I don't know where I put the server address I have MINIX box' IPTV stalker plus pllllllz need help if u can give me some pictures

[ashyman]

IPTV stalker plus not working for week now plz some1 help me

[dara]

IPTV stalker plus not working for week now plz some1 help me

http://iptvtalk.net/showthread.php?17839-MOD-EPG-with-Genre-Color-(10-3-4)&p=137258&viewfull=1#post137258

[ashyman]

http://iptvtalk.net/showthread.php?17839-MOD-EPG-with-Genre-Color-(10-3-4)&p=137258&viewfull=1#post137258

I'm using MINIX box, this method works in MINIX ?????

[pod77]

I'm using MINIX box, this method works in MINIX ?????

Did you read the thread??? Iptv stalker plus no longer works... Look at the thread

[dara]

Did you read the thread??? Iptv stalker plus no longer works... Look at the thread

Maybe I should make the red text blink! (nah... can't do that).

[expatter]

Ok were do I go to make my donation work again have read and tried most everything but spinning my wheels p1.iptvprivateserver.tv/c/index.html

Did you get this working yet? I messed about with urls with and without /c/ and index.html and a couple dozen resets and nothing worked. I FINALLY got it going today after talking with Crazed 2.0 and here's what worked for me:

I had set static IP addresses in my router (Apparently the server had an issue with that). When I changed to new IP addresses for my equipment...
I was finally able to connect.

Maybe this'll help someone else who's having authentication errors. Hopefully someone else won't have to jump through all the hoops and try everything short of sacrificing a goat to get onto the server!

[ilan]

...then where did my goat go??

[expatter]

...then where did my goat go??

I dunno. Is this him?


https://www.youtube.com/watch?v=nlYlNF30bVg

[BIGMANNYC]

im still having the same problem on a 8 core android box with kodi 17.1 staler client 2.8.3 (authorization failed retrying) , but on 2 other android boxes with kodi jarvis its loading fine same setting same url... could it be some conflict in kodi 17.1?

[expatter]

im still having the same problem on a 8 core android box with kodi 17.1 staler client 2.8.3 (authorization failed retrying) , but on 2 other android boxes with kodi jarvis its loading fine same setting same url... could it be some conflict in kodi 17.1?

Is the issue with the pvr only or also with Potato TV? Have you tried both pvrs (Simple Client)? Seems like many people with 17 use it. Maybe roll back one version in 17 and check?

[BIGMANNYC]

have not tried simple client or potato , tried kodi 17 & 17.1 they both have same version of stalker client 2.8.3 since other boxes having kodi 16.1 are working it could be isolated to kodi 17 , i emailed papiao they said to try p2 portal since the donation from this 8 core that had kodi 17 came with portal 2 , i went back to kodi 16 to get it working in the mean time and it only worked with the portal2 not with portal 1) so i will try kodi 17.1 again with all same settings but portal 2, and do a iptv reset before trying then if it gets the authencation issue its gotta be a kodi 17 or stalker clinet 2.8.3 issue.... , maybe its like when kodi 15.2 was working with nfps and kodi 16 needed the yahyabel url due to kodi 16 not doing url forwarding then it worked , so maybe if it still wont work someone may find out a different setting or url lets see.....ill try kodi 17.1 and simple client and post new findings soon.

[expatter]

have not tried simple client or potato , tried kodi 17 & 17.1 they both have same version of stalker client 2.8.3 since other boxes having kodi 16.1 are working it could be isolated to kodi 17 , i emailed papiao they said to try p2 portal since the donation from this 8 core that had kodi 17 came with portal 2 , i went back to kodi 16 to get it working in the mean time and it only worked with the portal2 not with portal 1) so i will try kodi 17.1 again with all same settings but portal 2, and do a iptv reset before trying then if it gets the authencation issue its gotta be a kodi 17 or stalker clinet 2.8.3 issue.... , maybe its like when kodi 15.2 was working with nfps and kodi 16 needed the yahyabel url due to kodi 16 not doing url forwarding then it worked , so maybe if it still wont work someone may find out a different setting or url lets see.....ill try kodi 17.1 and simple client and post new findings soon.

I do like Kodi 17 for its speed but I have not been able to get an epg to load so far. I'm still troubleshooting that issue. At least it wouldn't load in Stalker Client pvr. Now that I have the m3u I'll try and see if that's the sweet spot with Simple Client. It's working a treat on Kodi 16 with my own edited m3u and custom epg.

EDIT: After doing a clear data (TV/Guide) the EPG loaded up just fine in Kodi 17 Simple Client pvr.
Happy Camper Now!

[floder2]

so the NEW URL's for NFPS are ........ p1.iptvprivateserver.tv ..........p2.iptvprivateserver.tv......p3.iptvpriv ateserver.tv...........p4.iptvprivateserver.tv ...p5.iptvprivateserver.tv .....p6.iptvprivateserver.tv and all are working?

[rerun11]

so the NEW URL's for NFPS are ........ p1.iptvprivateserver.tv ..........p2.iptvprivateserver.tv......p3.iptvpriv ateserver.tv...........p4.iptvprivateserver.tv ...p5.iptvprivateserver.tv .....p6.iptvprivateserver.tv and all are working?

I'm using kodi 17.1 works great with stalker client 2.8.3 also epg is just fine for me and never a problem .The way I configured it was p1.iptvprivateserver.tv/c/index.html remote url http://yahyabell.com gave myself a serial number and id reset mac and was good from there

[dara]

so the NEW URL's for NFPS are ........ p1.iptvprivateserver.tv ..........p2.iptvprivateserver.tv......p3.iptvpriv ateserver.tv...........p4.iptvprivateserver.tv ...p5.iptvprivateserver.tv .....p6.iptvprivateserver.tv and all are working?

From the other site, the only two servers are p1 and p2. All but those who were on 5 were migrated to p1. However, you can pick either in the donation checker.

[expatter]

im still having the same problem on a 8 core android box with kodi 17.1 staler client 2.8.3 (authorization failed retrying) , but on 2 other android boxes with kodi jarvis its loading fine same setting same url... could it be some conflict in kodi 17.1?

I was just rereading this thread and wanted to ask what might be a stupid question, but on your android box with 17.1 - the android version is Lollipop? I read that is a requirement. That's why my Minix Neo Plus still has to have 16.1 as there's no plan for them upgrading android 5.

I loaded the new spmc 16.6 on that box and quickly realized the folly of my ways and rolled back to the previous version. It didn't work at all correctly.

Just thought I would mention it...

[BIGMANNYC]

good to know you have it working rerun11 what type of box are you using? ,the funny thing i had tried the the p1 and the p2 yesterday with the usual yahyabell remote url that works on kodi 16 , but kept getting the dreaded 'aurhorization failed retrying" until i gave up and went back to kodi 16.1 , and then it worked with p2 , that was the portal that was sent with donation , i will know try it once more with kodi 17.1 , on stalker client 2.8.3 (8 core android box with android 6.0) 3gb ram 32gb rom ,64bit) and if still no go then ill try simple client...

[BIGMANNYC]

hey i tried it again with kodi 17.1 stalker client 2.8.3 it fails to load channels same authentication failed , is there a tutorial for simple client has anyone got it working with simple client? thx

[rerun11]

Hi Media H8, works great I followed how to. Put in P1 server info thats in my post and the rest login info pw and the rest reset mac cleared cache cleared channels in pvr settings

[citydude]

I went to Papiao donation checker looked at the IPTV Portal changed it to what portal it said I was on in the stalker client and everything worked good! You may need to do a reset but I never.