BuzzTV xpl2000

[Gordo80]

Can you record with this box?

[satman714]

The catch up works great as long as there is a programming guide. If there is no guide I can't get the catch up feature to work at all.
Is there a fix for this or am I doing something wrong. It works either way on a mag and lets me pause live tv which this won't.

[floder2]

Catch-Up tv from the EPG. Will only work with providers that offer catch-up.

[satman714]

Catch-Up tv from the EPG. Will only work with providers that offer catch-up.

I understand that but it won't work if there's no guide. If it says no information it won't work. It should work regardless of a guide.

[crazy carl]

I understand that but it won't work if there's no guide. If it says no information it won't work. It should work regardless of a guide.

I see what your saying..and I agree it's an odd bug but really if yiu think about it if there's no epg there's no way for it to know how far into the recording you want to go right..that's how it works for Kodi anyways it just fast forward to a point in the week long or day long recording

[satman714]

I see what your saying..and I agree it's an odd bug but really if yiu think about it if there's no epg there's no way for it to know how far into the recording you want to go right..that's how it works for Kodi anyways it just fast forward to a point in the week long or day long recording

Since it is primarily an IPTV box it should work. On a mag I can pause anytime while I'm watching live and go back whether there's a guide or not. Unfortunately with most services the guides are hit or miss sometimes.
Other than that it's one of my favorite boxes. If i get up at 8am on want to go back to 7am to watch the beginning of the news I have to hope the guide is working or I'm out of luck. I know it works on the mag, I have to check on the T1.

They have been great with updates and I'm sure they will address this. A little more tweaking and this box should be the top box out there.

[Barry The Barber]

I get a great EPG on my BuzzTv.
https://image.ibb.co/g20uek/epgbuzztv.jpg

[satman714]

I get a great EPG on my BuzzTv.
https://image.ibb.co/g20uek/epgbuzztv.jpg

The guide not showing up is the fault of the provider not Buzztv.
The problem is with no guide the catchup won't work.

[Maestro701]

The guide is really out of this world and makes mag guide look awful

[beadvised]

The guide is really out of this world and makes mag guide look awful


Where's the best place to purchase one of these? I ordered one from eBay MYGICA seller and was sent the wrong box. I have read this forum and seeing there are two different versions? Please advise!

[Maestro701]

Where's the best place to purchase one of these? I ordered one from eBay MYGICA seller and was sent the wrong box. I have read this forum and seeing there are two different versions? Please advise!
Did you contact them about a replacement unit?

[NBS]

Where's the best place to purchase one of these? I ordered one from eBay MYGICA seller and was sent the wrong box. I have read this forum and seeing there are two different versions? Please advise!


worldwidesatellites is a reputable place

[floder2]

so I ordered a buzz tv xpl2000 from ebay and was sent a atv 1900 pro instead. Mygica says they can load the buzztv firmware onto it. Should I send the ATV back or keep it?


Did you ever get a replacement from way back in May .........

[satman714]

The guide is really out of this world and makes mag guide look awful

The guide on the Buzztv is far superior to the mag, quicker and much better layout. If the guide is not working(fault of the provider) then catch up won't work.
It does still work on the mag regardless of whether the channel has a guide.

[beadvised]

Did you ever get a replacement from way back in May .........


No they wouldn't pay for return shipping so they let me keep the box. But I really want the Buzz TV. How does the EPG compare to the one on T1 Plus to those who have both boxes?

[NBS]

No they wouldn't pay for return shipping so they let me keep the box. But I really want the Buzz TV. How does the EPG compare to the one on T1 Plus to those who have both boxes?

buzz populates instantly t1 does not

[Maestro701]

No they wouldn't pay for return shipping so they let me keep the box. But I really want the Buzz TV. How does the EPG compare to the one on T1 Plus to those who have both boxes?

Then they should have sent new box instead...

[floder2]

No they wouldn't pay for return shipping so they let me keep the box. But I really want the Buzz TV. How does the EPG compare to the one on T1 Plus to those who have both boxes?


I have bought many times from that same e-bay seller (I believe he is part of the buzztv Co ) He has always been up front and accommodating ..........He once sent a wrong item....told me to keep it and quickly sent me the correct item..........no extra charge .........I'm surprised you have not gotten a Buzztv Box yet........You have been talking about it for months

[Maestro701]

Sounds strange to me because if you can prove you can the incorrect item like sending him pics, then I think it shouldn't be an issue. I have ordered one and I pray I get the latest version. Can't wait!

[beadvised]

Sounds strange to me because if you can prove you can the incorrect item like sending him pics, then I think it shouldn't be an issue. I have ordered one and I pray I get the latest version. Can't wait!


I want to buy one but afraid to buy one from Mygica Outlet. Maestro who did you order from?

[NBS]

I want to buy one but afraid to buy one from Mygica Outlet. Maestro who did you order from?

I posted a site already

[gregg1110]

Hey i just purchased a BuzzTV and i love the box however i am having some epg issues. As you can see in the pictures attached it is 7pm and "The Italian Job" is on. However in the single channel epg it shows that its playing at 12:30pm and on the full epg it says Casino is playing at 7pm on that same channel. How do i fix this?https://ibb.co/h2OrAQhttps://ibb.co/cvHwc5

[Jagstyles]

I'm liking the box so far but an air mouse seems to be a must have because apps like Netflix are just downright awful to work with given they are the Android OS version and not the one designed for TV.

Also, I'm currently with Voodoo IPTV server but many channels aren't working like Disney. Can anyone check to see if Disney is working on their server/provider? Just wondering if its a provider issue or just everyone is down.

Lastly, any recommendations on IPTV servers?

Thanks

[Maestro701]

I want to buy one but afraid to buy one from Mygica Outlet. Maestro who did you order from?

I purchased mine from the same seller, I believe that every transaction cannot go wrong and these things happen. It's how they are dealt with that matters to me.

You can Google buzz iptv and a few options will be there including patriot electronics and Amazon, no one merchant is the best in my opinion and all have varying prices.

[Maestro701]

I'm liking the box so far but an air mouse seems to be a must have because apps like Netflix are just downright awful to work with given they are the Android OS version and not the one designed for TV.

Also, I'm currently with Voodoo IPTV server but many channels aren't working like Disney. Can anyone check to see if Disney is working on their server/provider? Just wondering if its a provider issue or just everyone is down.

Lastly, any recommendations on IPTV servers?

Thanks

The one right here that is old on this site for starters.

[crazed 9.6]

The one right here that is old on this site for starters.

good answer :)

[Jagstyles]

The one right here that is old on this site for starters.

I'm relatively new to this forum and to IPTV servers. If you cannot publicly state the name, can you PM me please? Any details you can provide would be appreciated.

Thanks

[crazed 9.6]

I'm relatively new to this forum and to IPTV servers. If you cannot publicly state the name, can you PM me please? Any details you can provide would be appreciated.

Thanks
iptv66
Rocket
nfps


soliciting other services besides what we support is not allowed, and was what Maestro was getting at, I am sure.

[gregg1110]

Piggybacking off my last post....is this a timeshifting issue?http://imgur.com/a/4zTMy

[ecky]

I just got one of these to check out. I am using ACE IPTV service and when I enter the details I get this "Loading... Handshake started" screen that doesn't go away and I cant access LiveTV because of it. I got promted to update as soon as I clicked on LiveTV so I did that. I have tried a full reset but the same thing is happening.

Anyone know what I should do next?

[ecky]

Also when I try to access the Google PlayStore it asks for my email when I enter the correct details it then asks for my last remembered password and security questions then tells me it cant verify the account is mine?

[gregg1110]

I too am using ACE but didn't run into any of those problems you suggested. I've heard of people resetting to factory default a few times to iron out some issues. What version of the BuzzTV app are you on?

[ecky]

I too am using ACE but didn't run into any of those problems you suggested. I've heard of people resetting to factory default a few times to iron out some issues. What version of the BuzzTV app are you on?

1.5 I have factory reset a few times now same thing happens every time just get stuck on this handshake started.

[ecky]

I too am using ACE but didn't run into any of those problems you suggested. I've heard of people resetting to factory default a few times to iron out some issues. What version of the BuzzTV app are you on?

Did you just put the portal url then enter your username and password under user credentials or did you enter the full m3u url with username and password included in it?

When I put the portal url ace-tv.xyz:25461/c then my user and pass in user credentials it tells me username or password is incorrect even though they are not and when I put the full m3u url in with username and pass included it just gets stuck on handshake started.

[ecky]

Nevermind got it working, I had entered the mac address wrong on the ACE site.

[ecky]

One question how do you remove something from the bottom dock?

[gregg1110]

How do i contact BuzzTV support.....my epg isn't matching what is actually on and its a bit annoying as the epg was the main reason i got this box.

[ecky]

How do i contact BuzzTV support.....my epg isn't matching what is actually on and its a bit annoying as the epg was the main reason i got this box.

staff had to delete this email link posted, sorry about that and thnx

[floder2]

How do i contact BuzzTV support.....my epg isn't matching what is actually on and its a bit annoying as the epg was the main reason i got this box.

Could be that your problem is the IPTV Service your using and not the box..............Try using NFPS---Rocket-iptv.....or 66IPTV services .............My Buzztv with those services don't have an EPG problem

[gregg1110]

Thanks floder....thats definitely the issue....i tried another iptv service and the epg is working fine.

[Maestro701]

iptv66
Rocket
nfps


soliciting other services besides what we support is not allowed, and was what Maestro was getting at, I am sure.

Sure right I was!

[Jagstyles]

iptv66 Rocket nfps soliciting other services besides what we support is not allowed, and was what Maestro was getting at, I am sure. Where can I learn the main differences between these IPTV providers? Also, I'm assuming we purchase it from someone on the site here?

[floder2]

Where can you get the Service?
http://iptvprivateserver.is/
http://iptvrocket.is/
http://iptv66.com/

Those are the three official sites, the first two sell our service by year and the last sells monthly too.

[Maestro701]

Which is the best player to use in the buzz app? There is default, secondary and internal? Also, how would one know which media player each of these three options uses?

[Maestro701]

I get a great EPG on my BuzzTv.
https://image.ibb.co/g20uek/epgbuzztv.jpg
Just a query I have with the guide and I hope someone can weigh in on it......When i pull up the EPG like the one above and certain programs begin at like 9:30 a.m. you cannot see what is on. I can only see what is coming up at the top of the hour, so the space between 9:00 - 9:30 is blank, the program coming up next is highlighted but when clicked it sets the reminder feature instead. Do you guys think it's a provider issue or the unit software, thanks.

[gregg1110]

I contacted service provider about my EPG issue and of course they denied it was their fault even though i've loaded other service providers and the EPG is fine. I guess i am just stuck right now since there doesn't seem to be any resolution in sight.

[floder2]

So if it works fine with other IPTV services.then its not the box...........must be the service your using

[Jagstyles]

Where can you get the Service?
http://iptvprivateserver.is/
http://iptvrocket.is/
http://iptv66.com/

Those are the three official sites, the first two sell our service by year and the last sells monthly too.

Does this mean what I think it means, "If our system detect that you are using your donation through a VPN, Proxy, Datacenter or in more than 1 device at the same time it will be automatically banned."

This is what is on the IPTV Rocket main page. So they do not allow users to use their VPN's when connecting to their servers?

[gregg1110]

Which iptv service would you guys recommend? im currently using 3 that aren't mentioned in this forum which work great but aren't hosted in the US so its causing these EPG issues. The iptv services that are hosted in the US don't have those epg issues.

[Ipguy]

The only services available here is NFPS ,rocket, iptv66 and we don't talk about other services on this forum.

[Maestro701]

Which iptv service would you guys recommend? im currently using 3 that aren't mentioned in this forum which work great but aren't hosted in the US so its causing these EPG issues. The iptv services that are hosted in the US don't have those epg issues.

There must be a solution to this, I would suggest tickering with some settings. Other than that let's hope it is fixed in the next software update. Hang in there bud

[gregg1110]

Well seeing as they pretty much denied it was their issue i think im going to return the box. A correct EPG is a big seller for me and was the only reason i got this box. However this is what they replied with in their email

"Usually this issue is from the service provider as we go by Universal Time CodeIf the provider is not using Universal Time Code, then the EPG time goes by the servers time."

[Maestro701]

You're going to return the box for something that has nothing to do with the manufacturer bro?? Have you tried different services? Let's wait until some others reply on here.

[Shoma]

Piggybacking off my last post....is this a timeshifting issue?http://imgur.com/a/4zTMy
I have the same issue. I think it is a bug.
And I am PDT. Maybe someone on Eastern time can confirm.

[floder2]

I don't have that issue at all..........using ptv66 Rocket nfps Services ..............Must be the Service your using ...........Just showed you 3 services that does not have that problem with the Buzztv Box............

[gregg1110]

Shoma i am EST and am having that problem but i can definitely confirm that its not with ALL services....however the main 2 i use don't work properly with it.

[Maestro701]

I tried a different service and while the grid guide showed the correct time, the popup one using the "ok" button does not. But atleast the grid guide which I think is the main one and the one that matters is accurate

[gregg1110]

For me, the grid guide showed the correct time but showed the wrong program listed on the epg so its really useless.

[buzztest]

The EPG Time issue has been found and fixed by BuzzTeam.
Will be included in the next update.

The issue is that some providers use server time for EPG instead of UTC, but their EPG data is timed correctly.
Buzz app was only grabbing Server Time, but now it will grab Server Time and Epg Data time slots.

So EPG will show the correct time and information on next update for those of you that have had this issue.

[ecky]

Loving this box so far after sorting out initial issues but I keep getting a weird problem with the remote jumping to different icons when pressing ok and randomly just opening netflix. out of nowhere, anyone else encountering this?

[beadvised]

I just got my box today and I'm liking it. Only issue I see so far is on the controller I click the mouse button and nothing happens. Any feedback on this?

[Maestro701]

Loving this box so far after sorting out initial issues but I keep getting a weird problem with the remote jumping to different icons when pressing ok and randomly just opening netflix. out of nowhere, anyone else encountering this?

Nope, take your time and press buttons lol. Do a factory reset and start over again

[Jagstyles]

Loving this box so far after sorting out initial issues but I keep getting a weird problem with the remote jumping to different icons when pressing ok and randomly just opening netflix. out of nowhere, anyone else encountering this? I've been having the exact same issue... Hoepfully they fix it soon... I also want to get an air mouse as the Playstore version of Netflix is almost unusable without an air mouse. I couldn't get the stock Netflix app to work on this box.

[Maestro701]

I just got my box today and I'm liking it. Only issue I see so far is on the controller I click the mouse button and nothing happens. Any feedback on this?

When you click the mouse button, click on the left or right arrows and the cursor appears. It moves kinda slow so be mindful of that. Some say an air mouse works better, I never tried it though

[Maestro701]

The EPG Time issue has been found and fixed by BuzzTeam.
Will be included in the next update.

The issue is that some providers use server time for EPG instead of UTC, but their EPG data is timed correctly.
Buzz app was only grabbing Server Time, but now it will grab Server Time and Epg Data time slots.

So EPG will show the correct time and information on next update for those of you that have had this issue.

Good news, the sort button in the EPG only gives two options as well; to display channels in numerical or alphabetical order only. Can there be an option to move channels in the favorites list?

[gregg1110]

The EPG Time issue has been found and fixed by BuzzTeam.
Will be included in the next update.

The issue is that some providers use server time for EPG instead of UTC, but their EPG data is timed correctly.
Buzz app was only grabbing Server Time, but now it will grab Server Time and Epg Data time slots.

So EPG will show the correct time and information on next update for those of you that have had this issue.

Thats great news as i was about to return the box......is there any ETA on when that update will be pushed out?

[veronicas]

So if it works fine with other IPTV services.then its not the box...........must be the service your using

That's not actually accurate. The bug IS with the Buzz box. The stalker server software is standard - meaning all the boxes have to adhere to the same code and options/arguments. There isn't any options/arguments in the stalker server software that is used to support "specific" boxes (ex. dreamlink, Buzz, MAG).

It works fine on a MAG, so it will work fine on the Buzz, as long as they (buzz) have implemented it PROPERLY.

There is nothing that can be done "server side" in order to add support for the Buzz Box (or any box)... As I said before, the stalker server software doesn't know what brand of box is connecting to it - and there are no arguments you can add to the server to support specific boxes.

Its up to Buzz to use existing stalker server arguments in their BuzzTV app, to fix these issues.


Hope that clarifies it for some. There seems to be a lot of confusion regarding who is responsible for what.



EDIT: Just read the remainder of posts and see that Buzz has confirmed the bug (hopefully the same bug), and will hopefully push the fix in the next update. Hopefully that will happen soon - please keep us posted!

I might pick one up again soon. That new EPG looks amazing.

[floder2]

The EPG Time issue has been found and fixed by BuzzTeam.
Will be included in the next update.

The issue is that some providers use server time for EPG instead of UTC, but their EPG data is timed correctly.
Buzz app was only grabbing Server Time, but now it will grab Server Time and Epg Data time slots.




So EPG will show the correct time and information on next update for those of you that have had this issue.


When will that update be sent ...................................?

[Maestro701]

When will that update be sent ...................................?

I hope it fixes both guides, grid and the popup one (ok button)

[satman714]

I hope it fixes both guides, grid and the popup one (ok button)

I hope they fix the catch up feature so it works even if no guide is present. I want to ditch my mag once and for all. That's the only problem I have with the box.

[Maestro701]

What needs changing also is the info popup. When the info button is pressed, channel info and other stuff should be displayed at the bottom of the screen instead of the little square box in the top left hand corner.

[prl1999]

I have buzztv box . from last week i am having problem. when i go to system then server. there are no server or portal option. I try to reset to factory reset. it's not working. any one know how to fix this.
thank you

[floder2]

Just go to Buzztv App...........it will take you to the server settings.......wait for a minute..you may need the last update..

[Marley]

whos the box maker ? and epg is from server not box that i know of but how it is displayed is from them

[Maestro701]

I have buzztv box . from last week i am having problem. when i go to system then server. there are no server or portal option. I try to reset to factory reset. it's not working. any one know how to fix this.
thank you
You have to all your updates first brother

[buzztest]

Buzzteam told me update should be Tuesday or Wednesday.

Fixes the epg time issue and other things.

@satman - Not sure how you can share the server you are using that has catchup for channels without epg.

Maybe email [email protected]
Then this issue can be looked at.

[buzztest]

What needs changing also is the info popup. When the info button is pressed, channel info and other stuff should be displayed at the bottom of the screen instead of the little square box in the top left hand corner.

This is how their interface is designed for the channel info bar to be at the top.

So I don't think they will change it
I will pass it along though

[buzztest]

I have buzztv box . from last week i am having problem. when i go to system then server. there are no server or portal option. I try to reset to factory reset. it's not working. any one know how to fix this.
thank you

I sent you a PM

[Jagstyles]

Anyway of getting the stock Netflix app that comes with the box to work? I was hoping to get the TV experience Netflix app but the stock app won't open for me when launching, it gives me an error message - can't recall what that error is right now.

Otherwise, Netflix is pretty useless without an air mouse for this box.

[Barry The Barber]

Anyway of getting the stock Netflix app that comes with the box to work? I was hoping to get the TV experience Netflix app but the stock app won't open for me when launching, it gives me an error message - can't recall what that error is right now.

Otherwise, Netflix is pretty useless without an air mouse for this box.

Have you went into the market (Aptoide Tv) and see if there is a update for Netflix?

[prl1999]

Thank you ,it worked.

[satman714]

Buzzteam told me update should be Tuesday or Wednesday.

Fixes the epg time issue and other things.

@satman - Not sure how you can share the server you are using that has catchup for channels without epg.

Maybe email [email protected]
Then this issue can be looked at.

Epg's are not reliable with most iptv services. If you want it to be a real iptv box it has to be able to use the catch up features without a guide. The mag does it with no problem. It should be an easy fix. It should not be dependent on a guide, it should be able to go back by time also.
You should also be able to pause any channel that has catch up, the mag ca n do this, the buzz cannot at this time.
I want them to fix this because other than this problem and some other minor things, this is the best box out there by far.

[Jagstyles]

Have you went into the market (Aptoide Tv) and see if there is a update for Netflix?
Yes I've checked but seems the Netflix app in the Aptoide TV market is the same version that is available through google play store. In other words, it's not the TV version of the Netflix app.

[ecky]

I was getting an error with the stock netflix also, just do a factory reset, should fix it.

[Jagstyles]

I was getting an error with the stock netflix also, just do a factory reset, should fix it.
Did that when I first got the box but same problem persisted even after doing a factory reset. Are you saying that the stock Netflix app works on your box? What region do you live in? What if this is region dependent or something.

[floder2]

Did you try uninstalling the Stock Netflix app ....then reboot the box ....Netflix app will be reinstalled automatically ..........Maybe your Netflix app was corrupted.........My stock Netflix app works fine

[Jagstyles]

Did you try uninstalling the Stock Netflix app ....then reboot the box ....Netflix app will be reinstalled automatically ..........Maybe your Netflix app was corrupted.........My stock Netflix app works fine
When you say "reboot the box" after uninstalling the stock netflix app, do you mean do a factory reset?

[floder2]

When you say "reboot the box" after uninstalling the stock netflix app, do you mean do a factory reset?

No........reboot it like you would a computer............with the box just unplug it and plug it back in..........

[Jagstyles]

No........reboot it like you would a computer............with the box just unplug it and plug it back in..........
Tried this but it did not automatically re-install Netflix after I uninstalled it. I also recently did a factory reset and same thing, stock Netflix app doesn't work. how did you get it to reinstall Netflix automatically?

[Maestro701]

Tried this but it did not automatically re-install Netflix after I uninstalled it. I also recently did a factory reset and same thing, stock Netflix app doesn't work. how did you get it to reinstall Netflix automatically?

Before when you uninstalled apps and then reboot they automatically reinstalled themselves during boot. Haven't noticed it happening now though.

[floder2]

yea I uninstalled KODI 16.1 that comes preloaded with the box....after rebooting it......I saw that Kodi was reinstalled via an update..........What I did was uninstalled Kodi 16.1 again and then in google play downloaded Kodi 17.3.....rebooted the box and no more kodi 16.1............17.3 replaced it...............should work with Netflix............My stock preinstalled netflix though works just fine............

[Jagstyles]

yea I uninstalled KODI 16.1 that comes preloaded with the box....after rebooting it......I saw that Kodi was reinstalled via an update..........What I did was uninstalled Kodi 16.1 again and then in google play downloaded Kodi 17.3.....rebooted the box and no more kodi 16.1............17.3 replaced it...............should work with Netflix............My stock preinstalled netflix though works just fine............
But doesn't Kodi just load the Netflix app we already have installed on the box itself? At least that's what happens with me - it loads apps installed on the box from within Kodi. So it ends up launching the Android Google Play Store version of Netflix, not the Android TV version - unless I've missed something. I'm currently running Kodi 17.3 as well. Thanks

[Munstah]

I have buzztv box . from last week i am having problem. when i go to system then server. there are no server or portal option. I try to reset to factory reset. it's not working. any one know how to fix this.
thank you

Try holding green button on remote. Some versions of the software require you to do that in order to see the portal and url input fields.

[Maestro701]

As before and after the last update I find that when the iptv service (whichever you use) freezes or maybe not, when you press the ok button to bring up the mag-styled EPG, the stream resumes, not from where it stuck but at its live point.

I think this is a glitch within the app and not with the server iptv.

[floder2]

But doesn't Kodi just load the Netflix app we already have installed on the box itself? At least that's what happens with me - it loads apps installed on the box from within Kodi. So it ends up launching the Android Google Play Store version of Netflix, not the Android TV version - unless I've missed something. I'm currently running Kodi 17.3 as well. Thanks

Kodi is completely separate and has nothing to do with stand alone apps.................

[Jagstyles]

As before and after the last update I find that when the iptv service (whichever you use) freezes or maybe not, when you press the ok button to bring up the mag-styled EPG, the stream resumes, not from where it stuck but at its live point.

I think this is a glitch within the app and not with the server iptv.
I've been having this very issue and it comes and goes... It was happening again today so I unplugged my box, plugged it back in, seemed to fix it for a while and then it started happening again. It's not my connection as I've tested it and the router, getting 60Mpbs on a wired connection.

[Jason9040]

Hey guys.. I'm really interested in the box but can someone comment on if you can record current or future shows (via EPG) into an USB flashstick or hard drive?

I already have Dreamlink T1+...I'd only interested in buying another box that has working RECORDING feature.

Thanks.

[buzztest]

Hey guys.. I'm really interested in the box but can someone comment on if you can record current or future shows (via EPG) into an USB flashstick or hard drive?

I already have Dreamlink T1+...I'd only interested in buying another box that has working RECORDING feature.

Thanks.

PVR for Buzztv is currently being worked on

There is a demo that is currently being tested.

[Jagstyles]

PVR for Buzztv is currently being worked on

There is a demo that is currently being tested.
I'm excited to hear this... I'm just about to buy another box and was debating on going with another device for PVR functionality - so are you saying this is definitely coming? Just need to confirm before I make my purchase.

[buzztest]

I'm excited to hear this... I'm just about to buy another box and was debating on going with another device for PVR functionality - so are you saying this is definitely coming? Just need to confirm before I make my purchase.

It is for sure coming
Just not sure how the release is going to work

[NBS]

anyone get netflix working?

[NBS]

anyone get netflix working?

never mind ,deleted and reinstalled ,working now

[MauiMang0]

Anyone else have an issue with the app crashing when scrolling through VODS?

[Munstah]

nope.. have not encountered that issue

[floder2]

Buzztv..company says the Netflix App that comes with the box is Netflix-HD and is not working until they can fix it,,,,,,,,,,,,,,,,,,

[Jagstyles]

Still getting screen glitches from time to time... resulting in having to exit the Live TV app and restarting it. Parts of the screen start going black as I scroll through the channels etc...

[floder2]

Try scrolling a little bit slower.............in Live-tv and VOD

[NBS]

recall button now opens netflix

[NBS]

Buzztv..company says the Netflix App that comes with the box is Netflix-HD and is not working until they can fix it,,,,,,,,,,,,,,,,,,

netflix works fine

[Jagstyles]

The stock Netflix app that comes with the box most certainly doesn't work. I had to install the updated one from the Apitoide store.

[NBS]

The stock Netflix app that comes with the box most certainly doesn't work. I had to install the updated one from the Apitoide store.

agreed as i stated in my earlier post

[floder2]

agreed as i stated in my earlier post

So your only using the Apptoid or google play Netflix app (requires a mouse) ..The one that came preinstalled with the box did not need a mouse to use...........

[NBS]

never mind ,deleted and reinstalled ,working now
Installed from market

[NBS]

search in vod pulls up movie but you cant select it to play

[floder2]

Email from Buzztv

Hello, Netflix HD is a modified version but it goes down because Netflix is preventing modified versions to work . In this case until we fix the only way to get Netflix working is using Aptoide or Google playstore version

[MauiMang0]

For the live tv button....if you have multiple servers and you hit the button which server does it bring up? The first one?

[Maestro701]

For the live tv button....if you have multiple servers and you hit the button which server does it bring up? The first one?

It brings up the last one that was in use

[Maestro701]

search in vod pulls up movie but you cant select it to play

Actually this feature works but on certain services. Working for me...

[NBS]

Actually this feature works but on certain services. Working for me...

As I posted on the other forum it wasn't working but is now

[Maestro701]

As I posted on the other forum it wasn't working but is now

OK will check....

[Cowboy1968]

Hi,

I am having an odd issue with my BuzztTV app I am hoping someone can shed some light on. For clarification I did all the updates and rebooted the XPL 2000 before configuring the IPTV Server and my providers EPG is solid, not to mention another customer of the provider has the same box and has not had the same issue. Also I have it hard wired via gigabit ethernet and 50 Mbps Download from my Internet Provider

What is happening is the grid style EPG is not working properly. A Majority of the channels are blank, some are stuck on the LOADING message, and the odd channel that has epg data is always 2-3 hours forward. For example if it is 9PM, the few channels that have info, the info is for whats on at 11 PM. If I scroll forward on this channel past the 11 PM mark, then Bamn ALL the channels epg info are now populated, but I am unable to scroll back to the correct time as I assume you cannot scroll back or forward if there is no EPG data. The weird thing is that on these few channels that have the epg data, its always 2 hours ahead of the correct time (the epg info is correct for what is on at that time though). So, if I look at the epg at 9pm lets say. The three to four channels with actual info will be populated at 11PM on along with all the other channels. If I turn off the box and try again at say 11PM, the epg data on those same channels are blank until 1 AM and when I scroll pass the 1AM mark, again Bamn all the channels now have EPG info.

Hopefully this makes some kind of sense as I tend to ramble. Any help would be very much appreciated
Thanks

To me this sounds like a bug and I remember reading a Reddit post mentioning this bug, but it is wierd that another customer who has the same box does not have this issue.

[Maestro701]

Funny thing is that the last update fixed all this, and everyone here can agree to that. So I'm thinking this particular update hasn't been pushed to your buzz as yet.

By the way, hit the three-lined button on your remote and tell us what version it is saying. Look right down at the bottom of that side panel.

[buzztest]

Hi,

I am having an odd issue with my BuzztTV app I am hoping someone can shed some light on. For clarification I did all the updates and rebooted the XPL 2000 before configuring the IPTV Server and my providers EPG is solid, not to mention another customer of the provider has the same box and has not had the same issue. Also I have it hard wired via gigabit ethernet and 50 Mbps Download from my Internet Provider

What is happening is the grid style EPG is not working properly. A Majority of the channels are blank, some are stuck on the LOADING message, and the odd channel that has epg data is always 2-3 hours forward. For example if it is 9PM, the few channels that have info, the info is for whats on at 11 PM. If I scroll forward on this channel past the 11 PM mark, then Bamn ALL the channels epg info are now populated, but I am unable to scroll back to the correct time as I assume you cannot scroll back or forward if there is no EPG data. The weird thing is that on these few channels that have the epg data, its always 2 hours ahead of the correct time (the epg info is correct for what is on at that time though). So, if I look at the epg at 9pm lets say. The three to four channels with actual info will be populated at 11PM on along with all the other channels. If I turn off the box and try again at say 11PM, the epg data on those same channels are blank until 1 AM and when I scroll pass the 1AM mark, again Bamn all the channels now have EPG info.

Hopefully this makes some kind of sense as I tend to ramble. Any help would be very much appreciated
Thanks

To me this sounds like a bug and I remember reading a Reddit post mentioning this bug, but it is wierd that another customer who has the same box does not have this issue.
This sounds like a time zone issue on your box

When you setup the box, did you change the date and time zone to match your location?

The box is defaulted to -5:00 for time zone, and it does not auto detect your location based on ip. You have to manually set it up.

You can find the date and time settings on the home screen then go to settings. You will find it on this page.



Try it out and see if this helps

[MauiMang0]

Three questions about the Buzz app...

1) Is there any way to not have to put in the password to access the adult channels? Or is this a function of the provider?
2) I've selected a few channels that I want as favorites. They have the yellow arrow next to them. But now what? When I press the yellow button on the remote nothing happens. How do I bring up my favorites?
3) When I click on settings, then scroll down to player, there are three choices, which one should I be using?

Thanks.

[NBS]

Dont know about the porn You only have to enter it once so i dont think its a big issue myself
your favourites will be in a group on the left when you hit the ok button

[Jimke]

I'm having a problem running the installed apps. Sometimes when I click Kodi, Netflix starts up, hit Buzztv and Kodi runs. I have reset and reinstalled but same problem. Anyone else with this?

[NBS]

I'm having a problem running the installed apps. Sometimes when I click Kodi, Netflix starts up, hit Buzztv and Kodi runs. I have reset and reinstalled but same problem. Anyone else with this?

are you talking clicking ok on the osd or keyboard shortcuts?

[Maestro701]

Three questions about the Buzz app...

1) Is there any way to not have to put in the password to access the adult channels? Or is this a function of the provider?
2) I've selected a few channels that I want as favorites. They have the yellow arrow next to them. But now what? When I press the yellow button on the remote nothing happens. How do I bring up my favorites?
3) When I click on settings, then scroll down to player, there are three choices, which one should I be using?

Thanks.
There's no other way to access the porn without the password. You may not have the worry of kids playing around with the TV but many others do. So it's a function of the providers.

I find the secondary plays best, channel change is much quicker

[Maestro701]

I'm having a problem running the installed apps. Sometimes when I click Kodi, Netflix starts up, hit Buzztv and Kodi runs. I have reset and reinstalled but same problem. Anyone else with this?

I believe it was said in this same thread that an update is coming that will fix this.

If you want to click on a particular app, it jumps to the app next to it or any other random app. It's a glitch.

[Deadwood]

I would like to see the specs on this box. If you go to "about box" in the settings, it should provide you with some of the specs. More ram ? Type DDR3 or DDR4 and does it have 3gbs or 4gbs ? It has android 5.1 so its an easy box to root but it will have some downsides but without the specs its going to be a guess at best.

[NBS]

Android 5.0 Lollipop, Quad-core 64-bit ARM Cortex-A53 up to 2GHz, Penta-core ARM Mali-450
4K(60fps),2K,1080p(60fps),1080i,720p,720i,576p,576 i,486p,486i, MPEG 1/2/4,H.265,H.264,VC-1,WMV,AVI,MKV,MOV
2 GB DDR3 RAM, 8 GB eMMC embedded MultiMediaCard, 1 x HDMI 2.0 (HDCP 2.2), Mini RCA Composite Video & Stereo Audio
802.11ac 5.0 GHz, Dual Band / 802.11b/g/n 2.4GHz RJ45 100/1000 Megabits, 2 x USB 2.0 Ports Max, USB HDD Support is 2TB 1 Slot Max 128GB

[Maestro701]

I would like to see the specs on this box. If you go to "about box" in the settings, it should provide you with some of the specs. More ram ? Type DDR3 or DDR4 and does it have 3gbs or 4gbs ? It has android 5.1 so its an easy box to root but it will have some downsides but without the specs its going to be a guess at best.

Did you try Google or look on ebay to view product details?

[Jason9040]

Has the recording feature been added yet?

[Maestro701]

Has the recording feature been added yet?

Nope, not as yet

[MauiMang0]

To switch between providers.........menu, settings, choose server, correct?

Am I missing another way?

[floder2]

Has the recording feature been added yet?

From what I have heard the xpl 2000 won't get PVR function,.......but the XPL 3000 will have it.............

[Maestro701]

Sounds good to me, waiting patiently

[Munstah]

I've heard the same.. I will be getting my hand on some xpl3000 stock tomorrow. Curious as to how it will perform compared to the current model.

[floder2]

I've heard the same.. I will be getting my hand on some xpl3000 stock tomorrow. Curious as to how it will perform compared to the current model.

As of today i heard that they will push through an update in 10 days for the xpl 3000 to give it the enhanced functions ...? Until then it will be about the same as the xpl 2000

[crazy carl]

I've heard the same.. I will be getting my hand on some xpl3000 stock tomorrow. Curious as to how it will perform compared to the current model.

BuzzTV XPL3000

2GB RAM
8GB Internal Memory
Enhanced PVR
Supports ATSC digital Tuner
HDR (High Dynamic Range)
ARM Cortex A53 2 GHz Processor
Android 6.0
6+ Middleware Solutions
4+ DRM Solutions
4K Ultra HD 60Fps Max resolution
HDMI 2.0
Bluetooth 4.0 (standard feature)
AC Dual Band Wi-Fi (best in class reception)
1 Year Warranty
Google Playstore and Aptoide Store = 1 Million + APPS
Open environment with side loading capabilities

How does one obtain said stick for ATSC and how do they plan to integrate it

[Maestro701]

ATSC, PVR, Upgraded OS and processor are the only differences?? Wonder what the interface will look like, hope nice

[floder2]

BuzzTV XPL3000

2GB RAM
8GB Internal Memory
Enhanced PVR
Supports ATSC digital Tuner
HDR (High Dynamic Range)
ARM Cortex A53 2 GHz Processor
Android 6.0
6+ Middleware Solutions
4+ DRM Solutions
4K Ultra HD 60Fps Max resolution
HDMI 2.0
Bluetooth 4.0 (standard feature)
AC Dual Band Wi-Fi (best in class reception)
1 Year Warranty
Google Playstore and Aptoide Store = 1 Million + APPS
Open environment with side loading capabilities

How does one obtain said stick for ATSC and how do they plan to integrate it


https://www.amazon.com/MyGica-A681-ATSC-Tuner-Antenna/dp/B0084363Z6/ref=sr_1_2?m=A1KSH3B1XCEZ3O&s=merchant-items&ie=UTF8&qid=1506433915&sr=1-2

[crazy carl]

https://www.amazon.com/MyGica-A681-ATSC-Tuner-Antenna/dp/B0084363Z6/ref=sr_1_2?m=A1KSH3B1XCEZ3O&s=merchant-items&ie=UTF8&qid=1506433915&sr=1-2

How will this work within the interface will it be done through the BuzzTV app or a separate interface

[crazy carl]

I've heard the same.. I will be getting my hand on some xpl3000 stock tomorrow. Curious as to how it will perform compared to the current model.

You pick these up yet

[Maestro701]

They are on ebay

[Munstah]

Literally just picked up stock and about to fire one up now. Apparently interface is the same but update next week will have some new features and what not

[Munstah]

on first boot.. I noticed the following:

- UI is the same for the time being
- Box is also a bit larger than the xpl2000.
- Kodi 17.4 preloaded
- I also notice a marginal imrovement in wifi performance
- Buzz TV2 is the name of the app on this box. version is 1.5 (77) and has a pvr option in the buzz tv menu where I can select internal or usb storage, however, I don't see the option to record anything at this point
- Everything else is the same look and feel at this point

Will do some testing from within kodi later on tonight

[Maestro701]

Can the wifi adapter detach from the unit?

[Munstah]

does not appear so

[Munstah]

I did do some testing tonight in Kodi, ran an integrated iptv services and what not. Performance in kodi is noticeably more responsive than the 2000 (I'm assuming this has to do with processor)

[buzztest]

How will this work within the interface will it be done through the BuzzTV app or a separate interface


Currently you must use the MyGica 681 USB ATSC tuner on the box and then DTV Player app which gets installed from the current Firmware update to use it
It also works with DVB-T/T2 (Using a different MyGica DVB-T/T2 Tuner) for those of you not in North America/South Korea who use ATSC signal.


Their will be an app update later that will allow you to view the channels from ATSC inside the Buzz app, it is currently being worked on along with many other features and upgrades etc.

[crazy carl]

Interesting, any pics of the GUI making use of the antenna?

[floder2]

I took the current firmware update ( 09-27-2017 ) for Buzztv 3000 but do not see the DTV Player app ,,,,not in the App Folder

[MauiMang0]

does not appear so

Dumb move on their part.

[Maestro701]

Dumb move on their part.

If you were smart enough and read what's in store for the buzz you wouldn't make such a comment and you would show patience.....

[Jagstyles]

I'm having a weird issue with a few iptv providers where when scrolling through the EPG in the Buzz TV app, it properly populates the guide for the first page or two but then subsequent pages in the EPG show "Loading Information" and shortly thereafter, if I try changing the channel, none of the streams work. I then exit the app and for a 30-40 seconds I'm unable to reconnect to the iptv server.

This issue only happens when using the EPG guide. If I scroll through the channels in the buzz tv app without using EPG, it works just fine. Given it has happened with more than one iptv provider, is there an EPG bug in the app that's causing this issue?

[Maestro701]

I'm having a weird issue with a few iptv providers where when scrolling through the EPG in the Buzz TV app, it properly populates the guide for the first page or two but then subsequent pages in the EPG show "Loading Information" and shortly thereafter, if I try changing the channel, none of the streams work. I then exit the app and for a 30-40 seconds I'm unable to reconnect to the iptv server.

This issue only happens when using the EPG guide. If I scroll through the channels in the buzz tv app without using EPG, it works just fine. Given it has happened with more than one iptv provider, is there an EPG bug in the app that's causing this issue?

Mine works fine in the EPG but it might be a provider issue. For me, as I scroll page to page it populates beautifully

[veronicas]

I'm having a weird issue with a few iptv providers where when scrolling through the EPG in the Buzz TV app, it properly populates the guide for the first page or two but then subsequent pages in the EPG show "Loading Information" and shortly thereafter, if I try changing the channel, none of the streams work. I then exit the app and for a 30-40 seconds I'm unable to reconnect to the iptv server.

This issue only happens when using the EPG guide. If I scroll through the channels in the buzz tv app without using EPG, it works just fine. Given it has happened with more than one iptv provider, is there an EPG bug in the app that's causing this issue?



If you have another box handy (mag, dreamlink), you should try one of those to rule out the box or server.

It very well could be the box but I am not sure. When I had mine, there were plenty of bugs/issues that affected the Buzz but not the Dreamlink or MAG. However, that was some time ago now.

So if you can, try the same server on another box and see if it is affected as well. If it is affected - server issue. If it isn't affected - box issue.

The servers don't run special code to accommodate the Buzz, its just the same old middleware running on all the boxes. Different "features" have to be configured by the box makers to work WITH THE SERVER, and not the other way around. I feel a lot of people forget this, and it allows issues to persist for some time because not all servers show the same symptom/issue. So some users experience 0 problems and are understandably under the impression the issue is server related. Some server seem to work 100%.

I suspect lots of these issues are related to the specific servers stalker version being a newer one, which the Buzz may not fully support yet. Although this is just a guess and shouldn't be taken as fact.

[jayfamis9]

I'm having a weird issue with a few iptv providers where when scrolling through the EPG in the Buzz TV app, it properly populates the guide for the first page or two but then subsequent pages in the EPG show "Loading Information" and shortly thereafter, if I try changing the channel, none of the streams work. I then exit the app and for a 30-40 seconds I'm unable to reconnect to the iptv server.

This issue only happens when using the EPG guide. If I scroll through the channels in the buzz tv app without using EPG, it works just fine. Given it has happened with more than one iptv provider, is there an EPG bug in the app that's causing this issue?

I'm having the same issue here and it's real annoying. Trying to find out what the cause is, do you mind telling me what isp you're watching on? I'm on Rogers and everytime I reset my modem things tend to work again so I'm trying to figure out if it's a buzz problem or isp problem.

[NBS]

I'm having the same issue here and it's real annoying. Trying to find out what the cause is, do you mind telling me what isp you're watching on? I'm on Rogers and everytime I reset my modem things tend to work again so I'm trying to figure out if it's a buzz problem or isp problem.

have no such issues with bell

[Jagstyles]

I'm having the same issue here and it's real annoying. Trying to find out what the cause is, do you mind telling me what isp you're watching on? I'm on Rogers and everytime I reset my modem things tend to work again so I'm trying to figure out if it's a buzz problem or isp problem.

My ISP is Cogeco. So seems like it's not ISP related. It's annoying as hell though. I spoke with one other use who has the buzz 3000 box an apparently the latest update on that box resolves the issue but the buzz 2000 hasn't received that update?

[Jagstyles]

I'm having the same issue here and it's real annoying. Trying to find out what the cause is, do you mind telling me what isp you're watching on? I'm on Rogers and everytime I reset my modem things tend to work again so I'm trying to figure out if it's a buzz problem or isp problem.
Curious, which IPTV server you using?

[NBS]

i wish they would fix the recall button if netflix is installed

[Munstah]

i wish they would fix the recall button if netflix is installed

they did on the 3000 so I'm assuming 2000 will get in the next update

[floder2]

i wish they would fix the recall button if netflix is installed

Netflix app that came with the Buzztv Box. 2000 and 3000 was the HD version...but its not working...........they said they may have to replace it with the SD version.......in the meantime you can use Netflix from the play store or Apptoid market...but you will have to use an air mouse................

[jayfamis9]

Yeah, not isp related after some tests. The glitch is easily replicated everytime I scroll through the EPG quickly. Really annoying, hope the fix comes soon.

[NBS]

Yeah, not isp related after some tests. The glitch is easily replicated everytime I scroll through the EPG quickly. Really annoying, hope the fix comes soon.

it is happening to me too

[jayfamis9]

I was just wondering, whoever has the xpl 3000 can they use APK extractor to get the buzztv APK so we can install it on our xpl 2000's? Its a longshot but anything to fix this stupid EPG bug on Vader's will be great!

[Maestro701]

Yeah, not isp related after some tests. The glitch is easily replicated everytime I scroll through the EPG quickly. Really annoying, hope the fix comes soon.

Happened to me last night but overall it's only the second time I've had this glitch.

[floder2]

I was just wondering, whoever has the xpl 3000 can they use APK extractor to get the buzztv APK so we can install it on our xpl 2000's? Its a longshot but anything to fix this stupid EPG bug on Vader's will be great!

This is the (Buzztv2 apk) ..............

NOT WORKING...............Sorry

[Jagstyles]

This is the (Buzztv2 apk) ..............


https://www.mediafire.com/file/0gm38mllblpa9g6/Buzztv2.apk

Didn't work. Buzz gives a parsing error on this file.

[Jagstyles]

Also, has anyone gotten the rewind 1 day to work? I've tried multiple different IPTV servers where in the EPG the << icon is there for some of the channels indicating you should be able to go back in time to play something you've missed but when I'm viewing the EPG, I can't seem to go back, no matter what button I try to press. It allows me to go forward a day, but not backward.

[carlrem]

hi im very new to this but am having trouble install iptv66 into my buzz box any help would be appreciated.

[Jagstyles]

Oh, and the last question I have is whether there's any way to hide the status bar at the top of the screen where the notifications go? I've noticed that in the Netflix and Plex apps, the status bar stays there during video playback and it actual cuts off the very top portion of the video being played. This was never a problem in Plex before but the recent update to the Plex App from the Aptoide store now keeps the status bar at the very top.

There's an update for Aptoide available but it doesn't install on my box as it says it's unsafe to install as it's requesting access to track everything I do. Should I ignore the warning and install anyways?

[NBS]

hi im very new to this but am having trouble install iptv66 into my buzz box any help would be appreciated.
Start a new thread

[jayfamis9]

Also, has anyone gotten the rewind 1 day to work? I've tried multiple different IPTV servers where in the EPG the << icon is there for some of the channels indicating you should be able to go back in time to play something you've missed but when I'm viewing the EPG, I can't seem to go back, no matter what button I try to press. It allows me to go forward a day, but not backward.

The only server with the catchup function that works with the buzztv is ** * * * *. I've tried multiple servers and none of them work with catch up except for that one. Also for Aptoide, I used the mouse to ignore the warning. Doesn't really matter to me as I use a throw away Gmail account.

[NBS]

I was just wondering, whoever has the xpl 3000 can they use APK extractor to get the buzztv APK so we can install it on our xpl 2000's? Its a longshot but anything to fix this stupid EPG bug on Vader's will be great!

bug is fixed on mine with update

[jayfamis9]

Bug seems like it got worst on my box :/ Now when I scroll through the EPG too fast it just kicks me out of the app. On top of that I'm also getting glitches when I scroll too fast on the other EPG where it lists by channel names. Catch up is still not working on multiple providers. On top of that I'm a bit annoyed with there being a record button now that doesn't do anything. Thinking about reverting back to the previous build if I can find it somewhere. For those of you who want to test out the new update I had to factory reset the box to receive the update. Otherwise it just wouldn't download.

[NBS]

Bug seems like it got worst on my box :/ Now when I scroll through the EPG too fast it just kicks me out of the app. On top of that I'm also getting glitches when I scroll too fast on the other EPG where it lists by channel names. Catch up is still not working on multiple providers. On top of that I'm a bit annoyed with there being a record button now that doesn't do anything. Thinking about reverting back to the previous build if I can find it somewhere. For those of you who want to test out the new update I had to factory reset the box to receive the update. Otherwise it just wouldn't download.

youre right ,i didnt scroll fast Will pass it on

[jayfamis9]

youre right ,i didnt scroll fast Will pass it on

Any chance you can ask them to supply the previous buzztv apk (1.5(72) I believe)? This update is a bit too buggy for me.

I emailed buzztv about the catchup problem but they just blamed it on the provider. This update made it seemed like it would work. Before the name would not show up under the date when in the catchup screen but now it does, it just doesn't play when I click it.

[Munstah]

Bug seems like it got worst on my box :/ Now when I scroll through the EPG too fast it just kicks me out of the app. On top of that I'm also getting glitches when I scroll too fast on the other EPG where it lists by channel names. Catch up is still not working on multiple providers. On top of that I'm a bit annoyed with there being a record button now that doesn't do anything. Thinking about reverting back to the previous build if I can find it somewhere. For those of you who want to test out the new update I had to factory reset the box to receive the update. Otherwise it just wouldn't download.

that's odd.. I literally held the button down to scroll through epg for a good 30 seconds on mine without issue.

[legsdiamo]

What is the latest update version, unable to connect to buzztv server, getting connection fail message?

[jayfamis9]

What is the latest update version, unable to connect to buzztv server, getting connection fail message?

I think it's 1.6 (86)

[NBS]

that's odd.. I literally held the button down to scroll through epg for a good 30 seconds on mine without issue.
I was unable to get it to kick me out today either Yesterday was a different story
The issue had been reported

[jayfamis9]

I was unable to get it to kick me out today either Yesterday was a different story
The issue had been reported

Same, haven't been kicked out either but that first day of the update was ridiculous.

Anybody having issues with the EPG? I find it's loading much much slower than before.

[Maestro701]

No issues with EPG, would have liked the channel names to be colored in the grid EPG

[NBS]

Same, haven't been kicked out either but that first day of the update was ridiculous.

Anybody having issues with the EPG? I find it's loading much much slower than before.

try clearing buzz tv cache

[jayfamis9]

try clearing buzz tv cache


Tried, loaded a bit faster but still slow in general.

Noticed another bug though. After adding everything to the favourites and selecting a show to watch, clicking on the epg button will show you everything in the group (Canada, USA, UK) instead of all the channels in the favourite section. A bit annoying because it wasn't like that before.

Also, I messaged the buzz team about catchup not working on the new update for most providers and they said it's because a lot of services use a modified version of stalker and the catchup only works on unmodified versions of stalker. They said they are currently looking into it but do not have an ETA for the update. Hopefully it comes before the end of this year but a part of me won't be surprised if it doesn't. Kind of wished I picked up a t1 plus instead just for catchup to work.

[Maestro701]

Noticed another bug though. After adding everything to the favourites and selecting a show to watch, clicking on the epg button will show you everything in the group (Canada, USA, UK) instead of all the channels in the favourite section. A bit annoying because it wasn't like that before.

Yeah I mentioned this in a thread elsewhere yesterday, from my favorite list if I select a channel that is in English section, when I go back to epg it puts me straight into the English section instead of the favorites section.

[jayfamis9]

Can someone confirm what update is currently installed on the box? If you go under settings, more, about, and scroll to the bottom where it says build. Mine is currently on 20170304 but I want to know if that's the latest.

[floder2]

it is the lastest 20170304

Any update since then has been for the Buzztv APP

[Maestro701]

Can someone confirm what update is currently installed on the box? If you go under settings, more, about, and scroll to the bottom where it says build. Mine is currently on 20170304 but I want to know if that's the latest.

Yup, you have the latest firmware on your device

[Jagstyles]

Latest update has completely bogged down the EPG. Takes forever to populate no matter which IPTV server I connect to... Any fix on the on the horizon?

[NBS]

Not having any issue with epg It's a bit slower but not a lot.

[Maestro701]

Latest update has completely bogged down the EPG. Takes forever to populate no matter which IPTV server I connect to... Any fix on the on the horizon?

It's slower than how it was before the update, which was slow to begin with, so yes it's very slow at the moment for me too...too slow

[jayfamis9]

It's slower than how it was before the update, which was slow to begin with, so yes it's very slow at the moment for me too...too slow

+1 so much slower with the new update. I find myself trying not to use the EPG as much which is annoying. Also I noticed another bug, some channels have EPG data but the EPG menu says no information. I can clearly see what's on when tuned to the channel but as soon as I click the EPG button it says no info or stuck on loading. So annoyed.

[Maestro701]

+1 so much slower with the new update. I find myself trying not to use the EPG as much which is annoying. Also I noticed another bug, some channels have EPG data but the EPG menu says no information. I can clearly see what's on when tuned to the channel but as soon as I click the EPG button it says no info or stuck on loading. So annoyed.

I am also experiencing that EPG glitch as well, the EPG with the ok button and also the info bar has what's on but with grid epg it says no information.

[Jagstyles]

I am also experiencing that EPG glitch as well, the EPG with the ok button and also the info bar has what's on but with grid epg it says no information.
Same issue here. I'm also still experiencing video glitches where if I scroll through the channels too quickly on the channel listing page, half the screen starts to glitch and portions of it go black. I have to exit the Buzz TV app and restart the app.

[Maestro701]

Same issue here. I'm also still experiencing video glitches where if I scroll through the channels too quickly on the channel listing page, half the screen starts to glitch and portions of it go black. I have to exit the Buzz TV app and restart the app.

Had that issue before the last app update, also the remote issue of clicking on something and the cursor ending up on another app and activating it

[MauiMang0]

Yeah I mentioned this in a thread elsewhere yesterday, from my favorite list if I select a channel that is in English section, when I go back to epg it puts me straight into the English section instead of the favorites section.


I dont have that issue, the epg shows whats in favorites.

[Maestro701]

I dont have that issue, the epg shows whats in favorites.

Okay let me rephrase so you understand..... I have some channels in the favorites category. While in the favorites category I select channel A, which happens to be a channel in the English category, while viewing the channel in full screen I go to a another channel by pressing the up/down or I don't change the channel at all. Let's say I then decide to go the EPG, grid or list, though the cursor is on the channel I'm viewing, the category highlighted is English rather than being the favorites, which I selected initially.

So whatever channel you are watching from your favorites, the EPG defaults back to the channel's original category. This means, I would have to select favorites again to see and select only those channels I have in it.

Hope you understand

[Maestro701]

I've just noticed a fix was implemented in the latest update tonight. Hasn't been pushed to my device as yet but it's very good to see the buzz guys take advice and listen to tell users. Keep buzzing guys.

[thejman]

I've just noticed a fix was implemented in the latest update tonight. Hasn't been pushed to my device as yet but it's very good to see the buzz guys take advice and listen to tell users. Keep buzzing guys.
Since the update I cannot access VOD. I use 2 different servers and the behavior is the same for both. When I click on something to watch I get booted back to the main menu.

[Maestro701]

Since the update I cannot access VOD. I use 2 different servers and the behavior is the same for both. When I click on something to watch I get booted back to the main menu.

Is this for the 3000 or 2000 version?

[thejman]

Is this for the 3000 or 2000 version?

The 3000...can't access any of the on-deman shows I like (Game of Thrones, Curb Your Enthusiasm). I didn't try last night but this was working on Monday night.

[Maestro701]

The 3000...can't access any of the on-deman shows I like (Game of Thrones, Curb Your Enthusiasm). I didn't try last night but this was working on Monday night.

Think you 3000 guys need to post your stuff in the 3000 section

[MauiMang0]

Okay let me rephrase so you understand..... I have some channels in the favorites category. While in the favorites category I select channel A, which happens to be a channel in the English category, while viewing the channel in full screen I go to a another channel by pressing the up/down or I don't change the channel at all. Let's say I then decide to go the EPG, grid or list, though the cursor is on the channel I'm viewing, the category highlighted is English rather than being the favorites, which I selected initially.

So whatever channel you are watching from your favorites, the EPG defaults back to the channel's original category. This means, I would have to select favorites again to see and select only those channels I have in it.

Hope you understand



Got it and same thing happens here.

[Maestro701]

Got it and same thing happens here.

Update notes mentioned it has been fixed so just waiting for it to rollout on the 2000 version

[gsp_yyc]

Was anyone here able to successfully update the XPL 2000 with build V001M901_20170414. The update starts but gets stuck at 54% every time. TIA

[Maestro701]

Was anyone here able to successfully update the XPL 2000 with build V001M901_20170414. The update starts but gets stuck at 54% every time. TIA

Is this a new firmware update released recently? Can't remember seeing this particular version.

[floder2]

I believe the newest ver is 20171026 (Oct 26th 2017)

[Maestro701]

It's what I have mine, thought there was a newer one based on previous post. Lol

[dishuser]

Was anyone here able to successfully update the XPL 2000 with build V001M901_20170414. The update starts but gets stuck at 54% every time. TIA

that's over half a year ago

[ilan]

Yes, by the numbers, it was a mid-April release.