Mandatory Update

[BIO]

UPDATE APR 29
No need to update manually anymore, it will now update itself after a factory reset.

Copy/Paste

TVonline:

Step 1: Check which is your build number by going to: “settings > system info > build number”

Step 2: If you have build 1.0.07: Download the second file below
If you have build 1.0.08: Download the first file below
**Rembmer: do not extract any of the “update.zip” file, just copy it over

Step 3: Place the correct build update.zip file on a USB/Jump drive (do not extract or change file name)

Step 4: Plug in the USB/Jump drive to the back of the device and power up your device

Step 5: A Firmware update message will pop up and click “install”

Step 6: Your device will restart and all the firmware update will be applied. After it’s done you should make sure you have build 1.0.11 from “settings > system info > build number”. Now you should be able to access MickyHop channel store once again.

Please follow these 6 steps to complete the software update for your VIXO 1 or TVonline device. Make sure you download the correct update.zip file for your build. If you require more assistance please open a ticket at our help desk.

[K00lKatT]

update worked perfectly..back in business..

[K00lKatT]

Correction: according to avov site after update for tvonline users, your build # should be 1.0.09, thks..

[Marley]

yea mine said same

[johnhodge]

can someone help me I did a factory reset now it does not let me enter server to add url

[johnhodge]

Forgot to say I have tvonline and with market it give an error failed to download

[K00lKatT]

you need the mandatory update, it's posted here on site, make sure you use the correct one based on your build #, thks..
see post #1..

[johnhodge]

I have copy the file but does not download it

[K00lKatT]

excuse me, be specific, pls

[johnhodge]

Do I have to open the zip file than copy it to usb

[johnhodge]

I have copied the file as it is on a usb

[K00lKatT]

download the zipped file to desktop, insert zip drive in puter, move file just as it is in zipped format to zip drive and follow BIO's instructions...the file works fine..been verified..

[johnhodge]

I have tried with both files, copied them to a usb unplug the box and restart does not get any message to upgrade firmware
.

[Marley]

stop roll and listen read up what you have first a avov1 box or a avov tvonline box not the same

[johnhodge]

Avov tvonline

[Marley]

Step 2: If you have build 1.0.07: get the file
If you have build 1.0.08: get the file
**Rembmer: do not extract any of the “update.zip” file, just copy it over

[K00lKatT]

only put the file for your build # on the drive, follow the directions exactly, there is no need to reboot until whole process is finished

[johnhodge]

That is what I did copied the file to a usb

[Marley]

is the stick formatted at fat32

[johnhodge]

I don't know have to find out will let u know

[Marley]

thats ez put usb in computer think right click will ask to format say yes to fat32 only thing make sure your on the usb and not your c drive

[K00lKatT]

more than likely will say E drive if windows...

[Marley]

after that just load that file dont unzip it and read the info on post 1

[theuduk]

Is F on my computer think it uses the same grade I received in school.

[rambopn]

I did my update today and it shows 1.0.9 and have no sounds on any channels. I have to turn the volume to max on my TV to here just a little sound.

[Marley]

click your mute button

[K00lKatT]

the update had nothing to do with audio...the update works fine..

[rambopn]

Thank you
I tried the mute button still same for the sound. I do not know what happened.
The updated worked fine.

[johnhodge]

I formated the usb to fat32 but nothing. This is what I did copy the file to my usb, instert usb in my tvonline turn of the power than when I power it on I get the avov sign and it goes directly to main screen. Does not show any message to upgrade software.

[K00lKatT]

you didn't follow the instructions..

[K00lKatT]

did you put the correct zip file back on your stick after formatting??

[Marley]

sorry rambopn try and reboot the box

[Marley]

last thing i can tell you is get a different usb stick and try that

[johnhodge]

tep 1: Check which is your build number by going to: “settings > system info > build number”

Step 2: If you have build 1.0.07: Download the second file below
If you have build 1.0.08: Download the first file below
**Rembmer: do not extract any of the “update.zip” file, just copy it over

Step 3: Place the correct build update.zip file on a USB/Jump drive (do not extract or change file name)

Step 4: Plug in the USB/Jump drive to the back of the device and power up your device

Step 5: A Firmware update message will pop up and click “install”

This what I understand from this instruction is if you have software 1.0.07 which I have copy the second below on a usb stick insert it in stb turn on power and it will give you a mssg to upgrade. If i understood it wrong pls explain it to me thnks

[Marley]

thats it your doing everything right big thing is do not extract any of the “update.zip” file, just copy it over

[johnhodge]

Yes that is what I did. I will try to find another usb stick thnks

[starRyder]

there seems to be some new features with +- signs and adult apps gone from store.

[JenBella]

i'm trying the update..following the instructions to update TVOnLine build 1.0.07. I've tried 2 different USBs, still not working for me. It is not reading the zip file when I turn on the box. Not sure what else to try..any guesses?

[starRyder]

let is sit for a few minutes it took mine 2-3 minutes before it asked to update.

[Marley]

try different usb stick first please

[Marley]

one thing i forgot to ask in system setting is the update on ? that may have something to do with it not updating

[Marley]

please tell me if that worked for you was thinking that the problem some of the members are having

[johnhodge]

Yes it was on

[Marley]

thanks was thinking that was problem back to the drawing board

[JenBella]

thanks that worked. just needed to have a little patience.

[legsdiamo]

Not working for me, getting not a valid package error message.

[Marley]

wrong one or you unzip it look one is for the avov1 and the other is for avov tvonline box dont mix it up

[papasmurf]

I had the same trouble then I found my windows. Download the file to the name( attachment) I rename it to(update) an it work like a charm

[airhead13]

I copied file to usb drive but does nothing,just shows image of usb device ,will not update?

[Marley]

formate usb to fat32 and nothing on the usb or it wont work

[airhead13]

in media info it does show what is on the flash drive,but will not load??I think I need to send these 2 avov back they don,t work at all, will not connect to any server.

[johnhodge]

Hi good morning this morning when I turned on my avov tvonline I've received a ota update.

[Capt.Kangaroo]

took mine a couple of minutes before upgrade started.
Just follow instructions a give it time to do its thing.

[BIO]

Just read this at the mickyhop site


No need to manually do the firmware update on the TVonline & VIXO 1 anymore. The team has figured out a way to do it over the internet. Just connect your device, do a factory data reset and everything should be working again.

[K00lKatT]

It's great to see the AVOV Teams response to probs, nice to see they are right on top of things; big plus in my eyes...

[crazed 9.6]

Yes sir K00lKatT :)

[crazed 9.6]

Same goes true with the TV-Online app... them guys are on it too.
Great co-operation and communication between the two :)

[monkeyboy]

Hello I am looking for pvr.stalker.client for kodi(Android). Please help!

[crazed 9.6]

Hello I am looking for pvr.stalker.client for kodi(Android). Please help!

how come you look in avov forum for that ?
It's not here and not needed for avov receivers :eek:

[Capt.Kangaroo]

my volume doesnt work since update. anyone else?
stays the same even on mute

[crazed 9.6]

my volume doesnt work since update. anyone else?

Never did the updatae here (Vixo1) , but what about reboot, that should work, no ?

[floder2]

So what is the latest version for avov 1 and the tv-online box

[crazed 9.6]

So what is the version of the latest update for avov 1 and the tv-online box

I have it posted in Vixo1 ONline app sticky thread :)

1.51 is the version for TV Online app

for avov vixo1 and avov Online models running system version, look at BIO's threads

[Capt.Kangaroo]

Never did the updatae here (Vixo1) , but what about reboot, that should work, no ?

Avov TVOnline. reboot didn't help. Guess I'll factory reset and try again

[Capt.Kangaroo]

Nope factory reset/ update. still volume doesn't function correctly

[crazed 9.6]

unplug that power cable from avov

reconnect

[Capt.Kangaroo]

unplug that power cable from avov

reconnect

yeah. did that. same result
may leave it unplugged for a few hours. Sometimes that helps. Ill report back later
I always have an issue with stuff, it'll work itself out. Always does.:)

[crazed 9.6]

only way to fix that is unplug. Then when reconnect , you should hear that bing noice that the avov does when scrolling functions.
Or maybe it's the hdmi cable? I do not recomend disconnecting a hdmi cable while receiver is powered up, but try it :)


If that don't work then clap your hands together 5 times and rub your tummy :)

[Capt.Kangaroo]

only way to fix that is unplug. Then when reconnect , scroll channels in IPTV TV fast and stop.. back up and stop.. Watch for pedestrians too. Then scroll some more and stop if still no sound.

Or maybe it's the hdmi cable? I do not recomend disconnecting a hdmi cable while receiver is powered up, but try it :)


If that don't work then clap your hands together 5 times and rub your tummy :)

Did all that while standing on my head and juggling 3 oranges. Next time I'll try 4 apples. I'll get it. Watch and see.;)

[crazed 9.6]

Did all that while standing on my head and juggling 3 oranges. Next time I'll try 4 apples. I'll get it. Watch and see.;)

I changed my symnoptise :)
see my 'edited' post above :)

I did have this happen to me and it was the power reconnect that worked. I thought it was channel changing, but it was the reboot

[Capt.Kangaroo]

I changed my symnoptise :)
see my 'edited' post above :)

I did have this happen to me and it was the power reconnect that worked. I thought it was channel changing, but it was the reboot

I done all that. After I'm done watching it tonight, I'll leave it unplugged and see if that does it. No big deal, I know I'll resolve the problem one way or another.
Thanks for the chat though...:p

[crazed 9.6]

BY the way, this vixo1 here gets reboot daily, almost 3 times daily. It's got a bad power cable connection and even a bump on the TV stand makes it disconnected.
It's even disconnected a few times while rebooting..

Never had any adverse affects to date.

[K00lKatT]

have Rockycat give it a stern look...that'll straighten it out....LOL

[crazed 9.6]

have Rockycat give it a stern look...that'll straighten it out....LOL

that won't work :eek:
rocky would have none of it right from start :)

[Capt.Kangaroo]

that won't work :eek:
rocky would have none of it right from start :)

Yep I'll get it on my on. Rocky scares me. lol

[Marley]

reboot should of worked cap would say the same thing crazed said weird you have old white one be careful the new tv online one should have np

[crazed 9.6]

reboot should of worked cap would say the same thing crazed said weird you have old white one

bought 4 or 5 black Vixo1 models . But my original still is the bigger white one. Don't have a OnLine model either, I did for awhile ago.
This Vixo1 is been great, 'cept that damn power cable connection.
I know...... use tape :)

I only fix things when I get paid for it :)

[Marley]

wow like new look on apps and new application in setup

[Capt.Kangaroo]

Update:
After having the volume issue after the mandatory update and leaving it unplugged all night, it still wasn't fixed.
But...a new OTA Update popped up and I installed that. Box Rebooted. All is well now.
Go figure.
I'm happy once again with my Avov TVOnline.(Best Box)...:)

[Marley]

yea got that update this morning whats with the + and- click on it and box comes up with nothing

[Capt.Kangaroo]

yea got that update this morning whats with the + and- click on it and box comes up with nothing

click the + and you can add icefilms or whatever to the home screen like xbmc.
after you've downloaded them from mickymarket
can load apps from the main screen

[Marley]

thanks so thats what it is

[Capt.Kangaroo]

thanks so thats what it is
yep. pretty cool

[nada233]

well got mine today ,installed it got and update all is working ,like the quick responsive remote,so far so good,mine is showing version 1010,as firmware.

[K00lKatT]

1.0.10 is correct...rock on!!

[Marley]

yea working great here luv all new stuff set up all my apps was to ez all my apps where gone had to reload like you said

[Marley]

oh and by the way check out setting in application that's new tell you how big the app is and how much memory you have left

[mikey432]

oh and by the way check out setting in application that's new tell you how big the app is and how much memory you have left

Very cool thank you for the info 😊

[nada233]

just noticed a little problem with time zone,when ussing my time zone which was listed ,I get the wrong time,as if they where using day light saving time but my zone doesnt change,so have to go to one with 1 hour difference,to get the right time.but other wise from yesterday hick up ,love the machine quick and nice layout ,quick remote and very intuitive layout.this machine is a great addition to tv lovers in general offering some extras like movies,from stalker I love this little machine now sits on living room,and mag is in bedroom.

[4strter]

I need help plz... I factory reset my avov tv online + box and downloaded and tried both update.zip files and it comes up saying "NOT A VALID UPDATE PACKAGE!" I currently have the firmware 1.0.8 and i am attempting this update due to the fact that I cant get thru the "credentials" part of the activation of the iptv service. I purchased the year package from iks66,registered my mac,recieved my route # and in the username\pass section it wont allow the number to go thru. Please help!

[Marley]

you click yes to credentials and start your own thread

[chinito]

are those zip file links on page 1 still active? i clicked on it and nothing seemed to happen

[ilan]

Your your message and account will be deleted shortly! Don't waste your time.

[panrooky]

How can I download the files. Please send me working links please...Thx

[panrooky]

How to and where can I download the zip file..help please

[Marley]

look just go to store click all if you need a update it will start

[keivankab]

Hi where can download the file for build 1.0.7 i cant find it thanks

[crazed 9.6]

That is an old file for the TVOnline avov box.
Is that the box that you have ?
It will not work on the Vixo models or the Fuse models, they have different file versions.

I do not even know how it is working on the TVOnline boxes, because it is an old file, but I do have it and will post as a mediafire link.
Give me a few minutes....

[crazed 9.6]

Okay guys here are the files. I have included all I had, including for the Vixo1 as well.
Use at own risk !

These release notes and these files are from the year 2015, so they are not release notes meant for today... But here you have it :)

VIXO 1

Step 1 Check which is your build number by going to “settings system info build number”
Step 2 first ensure which build is on your receiver now and use the corresponding file.
Rembmer do not extract any of the “update.zip” file, just copy it over
Step 3 Place the correct build update.zip file on a USBSD CardJump drive (do not unzip or change file name)
Step 4 Plug in the USBJump drive to the back of the device and power up your device. Click “local media” and a update message should come up.
Step 5 A Firmware update message will pop up and click “install”. If not browse the directory to find the “update.zip” file.
Step 6 Your device will restart and all the firmware update will be applied. After it’s done you should make sure you have build 1.0.11 from “settings system info build number”. Now you should be able to access MickyHop channel store once again. You can remove the jump drive when it prompts you to delete the file.


TVONLINE

Step 1 Check which is your build number by going to “settings system info build number”
Step 2 first ensure which build is on your receiver now and use the corresponding file.
Step 3 Place the correct build update.zip file on a USBJump drive (do not extract or change file name)
Step 4 Plug in the USBJump drive to the back of the device and power up your device
Step 5 A Firmware update message will pop up and click “install”
Step 6 Your device will restart and all the firmware update will be applied. After it’s done you should make sure you have build 1.0.11 from “settings system info build number”. Now you should be able to access MickyHop channel store once again.



1) To do this find an empty USB key and install the file I have attached called "update" on to it.
Notes: Do not unzip it, keep it as a zip file. Also make sure it is in the main directory of the USB (do not put it into another folder). Just in case, don't keep other files in there that you think might effect the installation.

2) Perform a factory reset and while in the first time setup menu plug in the USB (this is where the four main setting icons are). It should prompt you to do a firmware update in which you will say yes.

3) After this is done, your box will reboot again. After this you should have access to the channel store. If it still does not work you have a different issue with your box. Please do not try this for non TVOnline boxes. I advise you start a thread or open a support ticket with our website to get that issue fixed.


http://www.mediafire.com/file/pxfcq6blu6ssvee/build_1.0.07_TVOnline_update_-1.zip/file

http://www.mediafire.com/file/usc3iej48enymyt/build_1.0.08_TVOnline_update_-1.zip/file


http://www.mediafire.com/file/mq02b2406hh22ea/build_1.0.09_Vixo1_update_-1.zip/file

http://www.mediafire.com/file/ob11oub170t6u38/build_1.0.10_Vixo1_update_-1.zip/file

[keivankab]

I have an old one i think its from 2015 my problem is i dont get where can i download the fils

[crazed 9.6]

I have an old one i think its from 2015 my problem is i dont get where can i download the fils

The directions and files are posted above :)

[floder2]

Those files were only good for the Original TvOnline box .....They are not for the TvOnline Plus or The TvOnline v2

[keivankab]

Why my box doesnt show the update messeg when it rurns on

[keivankab]

Thanks man but it didn't work. Or maybe mine is tvonline plus its build number is 1.0.8
i factory reset it and now nothing work mikckyhup and live tv doesnt work and there is no server setting tab in the setting menu
have seen this situation ?

[dishuser]

Thanks man but it didn't work. Or maybe mine is tvonline plus its build number is 1.0.8
i factory reset it and now nothing work mikckyhup and live tv doesnt work and there is no server setting tab in the setting menu
have seen this situation ?
there's a whole thread about it

[keivankab]

there's a whole thread about it
where is the link man appreciated i have no idea I'm new to this web sit and i just reset my box and nothing works right now

[dishuser]

where is the link man appreciated i have no idea I'm new to this web sit and i just reset my box and nothing works right now

thread right below this one

[vasan]

After factory default my Avov tv box still has no image. How can i fix it? Please try to help

[4me2c]

Read : http://iptvtalk.net/showthread.php?38233-Empty-MickeyHop

Pay Close Attention to the Model Numbers and Names...!

[vasan]

model vixo web
www.avov.tv

[4me2c]

Got a Reply from Avov Tech :

"Hi, My Name.
Thank you for using our product.
Your model V2 was 3 years ago manufacture product.
The Android version was 4.0.
Now we use the 7.0 version of Android.
Kodi 17.6 services only work with Android version 5.1 and above.
Android box is like a smartphone.
Technology is changing too quickly.
Previous chipset does not allow upgrades.
This is not the issue of boxes, it's the chipset problem.
Existing boxes can only use different functions than using a server to watch live TV.
I'm sorry I couldn't help you."

Hope that Helps Others to Understand...!

[floder2]

Yes....but they didn't say anything about live tv for those older boxes....forget about the apps like kodi........some people want just the tv.online app to work