Pulsar Video Add-On

[Kimbo]

This is a new video add on and so far is working great and i received positive feedback on it. Here is how to get it


https://www.youtube.com/watch?v=2_NkJjyQkuU

[Marley]

https://seo-michael.co.uk/how-to-install-pulsar-repo-setup-pulsar-for-xbmc/ little read me

[date]

Looks good Laser, although I would not install it reason it asks you to allow programs on this system and other system to control your kodi, this just don't find me comfortable with it, I know it is required for the addon but I will stand by for now.
Thank you for bringing new things to us.

[Kimbo]

Thanks Date, a valid point.
Looks good Laser, although I would not install it reason it asks you to allow programs on this system and other system to control your kodi, this just don't find me comfortable with it, I know it is required for the addon but I will stand by for now.
Thank you for bringing new things to us.

[dara]

I installed it, and read up on it. It basically uses bittorrents for movies and TV shows, so that's why it requires other systems to control it (nature of the beast in bittorrents... you have to give a little to get some). I think the title of the video is overly enthusiastic, to be honest. If you want to run this, I'd run peerblock, to not get snapped up by the internet police.

[Kimbo]

Yes the title was overly enthusiastic(soloman is a showman), LOL.. I actually had it for a week with no issues so far, I like a lot of things from it but I will wait another week before posting a review but so far it delivers. No worries about the internet police since it states below it does not go to any sites.

[Kimbo]

Here is more info:

What it is
Pulsar is an torrent finding and streaming engine. It doesn't go on torrent websites for legal reasons. However, it calls specially crafted addons (called providers) that are installed separately. They are normal XBMC addons, and thus can be installed/updated/distributed just like any other addon.



Supported platforms

Windows
Linux 32/64 bits (starting Ubuntu 12.04)
Linux ARM (Raspberry Pi, Cubox i4pro etc...)
OS X 64 bits

How it works
Pulsar is an torrent finding and streaming engine. It doesn't go on torrent websites for legal reasons. However, it calls specially crafted addons (called providers) that are installed separately. They are normal XBMC addons, and thus can be installed/updated/distributed just like any other addon.

Pulsar is centred around media: it browses media from TheMovieDB and TVDB.
And so, when you decide you want to watch a media (i.e. given an IMDB or TVDB Id), here's what Pulsar does:

Enumerate the installed providers
Call each provider to find the media you want to watch (in parallel)
Each provider returns a list of BT links they found
Collects and de-duplicates all the links
Goes on the BitTorrent network to find out the number of seeds and peers in real time (i.e. not provided by the provider)
Finds out of which quality are the different links (thanks to their name)
Ranks the links by quality and availability (Pulsar privileges quality over availability, but it's not dumb. However, you can get a full list to choose from manually it you want)
Sends the chosen link to the BitTorrent streaming engine (brand new, and completely rewritten)


All of this is done in less than 1s. Pulsar is around 95% Go, and thus, it's fast. Very fast, actually.

The BitTorrent streaming engine is brand new and very resilient (or at least it's designed to be). It's built on top of the brand new libtorrent 1.0 (which had special patches for the streaming case). So it's very optimised, especially for low CPU machines. I have yet to find a media that doesn't play with the engine.

Providers
As said before, Pulsar relies on providers to find streams. Providers are easy to write, and average ~20 lines of Python. As they are normal XBMC addons, which can have their own configuration (although it is not recommended because it complicates things).

Sample Pulsar provider: (deleted)

Providers are given a max amount of time to run before Pulsar considers them to be too slow. The timeouts are as follow:
- 4 seconds on Intel CPUs
- 20 seconds on multicore ARM CPUs
- 30 seconds on single core ARM CPUs (RPi)

Please note that for legal reasons, I won't develop nor distribute any providers connecting to illegal sources. So there is no need to ask me.
While I can partake in general discussions regarding provider development, I won't do so for illegal sources specific problems.

FAQ

I can't code. How can I help?
Spread the word. Talk about it with your friends, show them, make videos, tutorials. Talk about it on social networks, blogs etc...

The plugin doesn't work, what can I do?
Put your xbmc.log on pastebin.
If you don't know how to do that, just follow the guide at: deleted

Can I seek in a video?
Yes, but it can fail.

What about seeding?
When watching a torrent, you will be seeding while you watch the stream.

Does it downloads the whole file? Do I need the space? Is it ever deleted?
Yes, yes and yes.

Can I keep the file after watching it?
Yes, change it in the addon settings.

Can I set it to download directly to my NAS?
Yes, but you need to mount your NAS via the OS, not via XBMC.

Provider X is blocked in my country/ISP, how can I set another domain?
Sorry, I won't comment of specific providers.

Will there be an Android version?
Yes. I have a working version right now, but it's not stable enough for release. Don't blame me, the Android ecosystem is pretty bad for that sort of thing.


Changelog
v0.5.0:

Trailer support
Boost magnets with default trackers
Multi-lang support for metadata
Add icons in menus
Added new default trackers
Update to go 1.4.2
Update to OpenSSL 1.0.2a
Update to libtorrent 1.0.4


v0.4.7:

Fix stalled buffering
Fix issue where Pulsar would enter a restart loop when cancelling a buffering
Handle Unicode paths
Switch to simplejson, as it is ~30% faster at loading JSON


v0.4.6:

Much better bandwidth allocation at the cost of slightly longer buffer times


v0.4.5:

Fix memory leak in bjsonrpc (would crash ARM devices)
Fix leaking goroutine during buffering


v0.4.4:

Fix a closure leak when the JSONRPC asks wether to serve or not
Set piece deadlines, and also when seeking
Limit DHT memory
Change settings regarding disk cache, atime, free hashes and ip overhead


v0.4.3:

Fix stalled buffering


v0.4.2:

Force downloading of pieces, even if dupes, should prevent the stalled buffering
Only match on %02d for absolute numbers episode filters
Display when we are unable to resolve a .torrent file
Fix episode filtering for "1x02" episode numbering


v0.4.1:

Update to libtorrent 1.0.3 (should fix speed issues)
New buffering method (slower, but more reliable)
Filter irrevelant items for episode search
Better support for anime detection
Make normalization better
Filter irrelevant links when searching for episodes


v0.4.0:

Subtitles support via OpenSubtitles
Better BitTorrent performances (upgrade to libtorrent pre-1.0.3)
Prevent empty movies from showing/crashing


v0.3.2:

Auto updates with auto repository
Add Most Voted movies
Add IMDB Top 250
Add TV Shows Genres
Migrate TV Shows from Trakt.tv to TMDB and TVDB
Notify when no providers are installed
Add clear cache command
Faster displaying of results
Massive performance improvements
Check for sufficient space before starting the download
Use GZIP for cache storage
Enable TVDB caching
Enable Absolute Numbering for TV Shows
Use TMDB's Serie's name when searching for an episode
Fix (get/set)_setting
Fix raw search to a string, not an object
Explicitely accept GZIP payloads when performing HTTP requests
Change pulsard and jsonrpc host to 65251 and 65252
Ensure we don't hang XBMC when closing
Unlock files on BSD/Darwin systems (could prevent playback of OSX)
Change provider timeout to 30s on single core linux arm (Raspberry Pi)

[Kimbo]

More info

Providers Hosted on Repos

There are several duplicate providers on the repositories, these are providers with different authors. Each duplicate provider may have different quality, file size, and language options. To change these settings see 'configure provider settings' below. It is the user's preference which providers they choose to use.

How many providers can I have enabled at one time?

Depending on your internet service provider's speed you may enable up to approximately 6 providers at once. If you enable too many providers at once this will cause Pulsar to timeout and you will receive a notification that the 'script has failed'.

How do I Enable/Disable Providers?
Providers can be enabled or disabled the same as any other Kodi addon.
Settings -> Add-ons -> Get Add-ons -> Pulsar Unofficial Repo -> the provider title -> Enable/Disable

How do I configure provider settings?
Settings -> Add-ons -> Enabled add-ons -> Programs -> the provider title -> Configure
or
Settings -> Add-ons -> Get Add-ons -> Pulsar Unofficial Repo -> the provider title -> Configure

The repositories are blank or don't show the latest version of provider...
You must 'Force Refresh' the Repository in question.
If you don't know how to do this, just follow the guide at:
http://kodi.wiki/view/Add-on_manager#Force_refresh

How can I get my provider hosted on repos?
Contact iCanuck via pm

[xdetoursx]

Since this uses public trackers to stream content I would highly recommend using a VPN with this if you're in a country where they pursue torrenters

[dara]

Since this uses public trackers to stream content I would highly recommend using a VPN with this if you're in a country where they pursue torrenters

I use PeerBlock if I'm torrenting, but I'm not sure if it's totally effective either.