New release v0.9

[mvas]

v0.9
What's new:
* Added Smart Launcher support (Stalker 5+)
* Added limited PVR support (only streams with fixed bitrate)
* Updated Exo and Ijk players
* Reduced memory usage
* Reduced portal loading time
* Added a fix for long channel numbers (1000-9999) in Stalker (profile->Advanced settings->Apply CSS patches)
* Fixed some UPnP service issues
* Fixed audio tracks/subtitles in Exo
* Fixed software remote control issues on some devices
* A lot of other bug fixes

Free version
armv7a
https://mega.nz/#!cNhjECLD!nmV3_-Z4s52bwLevwlxAHjiLX3bqHn0Mj1WhgxeG23c
x86
https://mega.nz/#!wQIHiYKT!tpJ_ri71F15QaD0YdcoFgDtjrPYuyJekJz4C4LR 04Rw

NFPS
armv7a
https://mega.nz/#!9VQxnZhJ!3xWVlDGNWXCDZYqXc7H-TONopdWMzl-b8IClWQ9nQYI
x86
https://mega.nz/#!tRh2ACSK!eT3p6SSVS9FWhkMTNdcigcFGq2ZiEvEVpFYulVm lCnU

Rocket
armv7a
https://mega.nz/#!kUJgjJbR!YGA4_mPc3Ug-VqMCqa9GnBXoPDcpGk9RtZikeAVxFCs
x86
https://mega.nz/#!1RRRXZgb!HwI8EVmLgZ6q7DmgGJbdcV4krlNQe6GaBWSbPP_ o7u8

iptv66
armv7a
https://mega.nz/#!hI5SWYBI!03ed5NCuNKPzIUDDFEMlxsxHz8V-feV7QU46pkGNyUI
x86
https://mega.nz/#!cJ4iVLzC!a3TGPBK4nAlc6mpqH4hazl_JRajx2kqAIoe3rqv K2OM

[floder2]

Thanks so very much............!!!!

[floder2]

.................................................. .............................................

[Glock20C]

very nice...a lot smoother than 0.8 thank you

[satviewing]

Thank you for all your hard work, sure that it is appreciated by many

[autostope]

I have Android Box RK 3229 , get an error message "Your STB is blocked. Call the provider". But with the same version on my other TV Box from another manufacturer it works just fine. It's like the app is not covering the MAC address and the device can't register on the Stalker Portal. Is there I way for you to fix this? Thanks! So far you've been doing a great job! Please Help me

[big dady]

Do a iptv reset that will fix your problem

[bawler]

Yes this version fixed many issues with .07 and .08. Loads up faster, smoother and better guide support. Thanks Team!!!

[Specialist]

Version 0.9.01 is avaliable. But after 1hr still downloading.

[Acf150]

I just updated to version 0.9.01 and everything was working great yesterday. Today I woke up and when I turned on the STB emulator there is no guide info on any of the Channels. What happened? How can I fix this. Yesterday almost all the channels I watch or U.S Channels had guide data on the bottom of the little screen when clicking through channels. Today I have no guide data on any channel. Again I'm on version 0.9.01/ STB iptv66 / on invidia shield. It's been working great until today. Please let me know if I should just wait or if not how can I fix this. It's been a great guide and getting better Mr. Mvas, but I need help with this issue, Thank you

[Marley]

took me 1 sec to download its you

[Acf150]

Do you have guide data on your stb? I woke up today and none of my channels have any guide info. I don't know what happened. Is it just me? How can I fix this? Yesterday when I first updated the STBEMU (PRO) version 0.9.01 Everything was fine guide and all. But today I have no guide on any of the channels? I'm at a loss as to what I can do if anything to fix the guide issue. It seems to have stopped working at around 5am because when I click to the right I see the last guide info was at 4/5 am?? I don't get it.

[willrod00]

are this codes clone safe I'm using KFPS

[Acf150]

Do you have guide data on your stb? I woke up today and none of my channels have any guide info. I don't know what happened. Is it just me? How can I fix this? Yesterday when I first updated the STBEMU (PRO) version 0.9.01 Everything was fine guide and all. But today I have no guide on any of the channels? I'm at a loss as to what I can do if anything to fix the guide issue. It seems to have stopped working at around 5am because when I click to the right I see the last guide info was at 4/5 am?? I don't get it. Edit; I was waiting for someone to respond to my question as to why I woke up this morning after updating to 0.9.01 and waking up to no guide data on any of the channels. But I guess I was the only one. I just got home from work and turned on my invidia and opened the STB and to my surprise all the guide is back. Thank you Mvas I guess the guide was updating or I had a glitch. But all is good now. Happy camper once again. Thank you for your hard work and dedication to this all and making it better all the time. It's great, thank you!!

[smly]

SINce updating my box tio the latest version it goes blank after 20 mins on all channels . When I go to stb settings advanced settings in the emulator the option for screensaver has defaulted to 10 mins and it does not allow any changes ,could this be the reason i am not allowed to watch any channel for more than 20 mins?

[Specialist]

Happy Xmas to all

[Specialist]

30 sec. to update in mibox
25sec in shield.
Never download in nexus player. I did it manual.

Super stable and no issues.

[mvas]

v0.9.03
* Fixed authentication issues on Android 4.4

This update fixes authentication issues on Android 4.4 for those who couldn't log in. After you've installed the update please check that <profile config>->Advanced settings->"Fix AJAX support" is enabled. This option is required for Android 4.4, but if you have another version you may also enable it if you want to use external services (YouTube, etc).
Also if you have Android 4.0-4.4 you may disable option <profile>->Advanced settings->Apply CSS patches->"Fix invisible login/password in Stalker", because it breaks authentication dialog on old Androids (it is still usable, but better to disable this option).

Free version
armv7a
https://mega.nz/#!5I4WxQjZ!pHBzeCazaYELG4OBJsXfm0UUBLwP_PVlx2RaBeR v-uQ
x86
https://mega.nz/#!9VIAHbJB!FLC4SY0WSmOeri4uOXoGO-nyUjD6MuzY-yjZJvNIe8A

NFPS
armv7a
https://mega.nz/#!kUpGSRrL!ejQjw7F4fTLQ2Y4pfpTK8_WBz01saxGCwL0fyyR SijY
x86
https://mega.nz/#!wFRHgQLQ!N8kxGN8BJ9O7A2R3bEHjZvBR09hmdyUkHOvdZw3 Hkf0

Rocket
armv7a
https://mega.nz/#!1UBG3aIQ!nnk90_lSWjJqTXrq4m9C1NCtivUi72WU7YigK4R IguU
x86
https://mega.nz/#!JNI2EJBQ!_NzoxnIGIAnMN0QC93Xjeo-jGiNKYOO-w4gq4ZL7ewU

iptv66
armv7a
https://mega.nz/#!tB50xZTD!1fuRKEOhevL4rLC83aPaAhpyS2QG_GCp3nVEE4A GLmM
x86
https://mega.nz/#!dIIyHTAB!rT3E6i06kZaAxXsS-HihE3r33T4nBr8k-Le8NDJydek

[idenphones]

09.03 seems to have broken authentication on NFPS in spite of IPTV reset and the other suggestions.
Please call the provider! He didn't give me his phone number so i can't :)

[Wantboost]

I'm curious is there a epg

[odz123]

Hi mvas,

I just started using stb emu pro v0.9.03 but on my Nvidia shield the channel list section shows up as a black screen if I use an external player like mxplayer. It shows up fine if i use iljk or exo but mxplayer has really good picture quality so it would be great i could get the external player option working. I tried vlc player even though it does not work to play any channels but it also had the same problem so it doesnt not appear to be specific to mxplayer.

steps to reproduce:
1) switch to external player click on a category. The first channel of the category plays via mxplayer.
2) exit mxplayer to change the channel. Black screen where the channel list should be. The list is there because I can scroll down and select another channel but can not see what I am selecting.
3) left arrow back to the home screen. The channel list flashes for 0.5 seconds before it switches to the home screen.

[kjin01]

applying css settings not sticking even after saving profile guess there is a bug there. ajax still didnt fix it either i change the portal to 22.... i reset the ip from papiao same thing .. emu 0.8 works well tho please advise

[Wantboost]

Do emulators have a EPG?

[frostycold]

Do emulators have a EPG?

Yes they do. No different that having a Mag box.

[carbo]

I'm experiencing the same problem of invisible channel list when using an external player like MX player with the new update version 0.9.03.


Hi mvas,

I just started using stb emu pro v0.9.03 but on my Nvidia shield the channel list section shows up as a black screen if I use an external player like mxplayer. It shows up fine if i use iljk or exo but mxplayer has really good picture quality so it would be great i could get the external player option working. I tried vlc player even though it does not work to play any channels but it also had the same problem so it doesnt not appear to be specific to mxplayer.

steps to reproduce:
1) switch to external player click on a category. The first channel of the category plays via mxplayer.
2) exit mxplayer to change the channel. Black screen where the channel list should be. The list is there because I can scroll down and select another channel but can not see what I am selecting.
3) left arrow back to the home screen. The channel list flashes for 0.5 seconds before it switches to the home screen.

[coreyman2]

is there a better epg? such as a guide with all the channels on a scrolling page?

[solaris]

is there a better epg? such as a guide with all the channels on a scrolling page?

It is identical to the Mag boxes... so I wouldn't say "better", just functional.

[sp0okz]

Great update running awesome :)

[sp0okz]

Do you provide custom STB's?

[caribchief]

is there a better epg? such as a guide with all the channels on a scrolling page?
Yes there is. If you can map a button to the info key in settings you will get the guide view you are looking for.

[joemark80]

Thanks for the great app is there a windows version of the app available

[rebeleye]

Can I use this emulator with an IKS service (NOT IPTV)?
The Dreamlink T6 guide is terrible, hoping to use StbEmu instead.

[big dady]

no you can not

[phoneix]

Thanks for the great app is there a windows version of the app available
.............. wrong quote

[phoneix]

Can I use this emulator with an IKS service (NOT IPTV)?
The Dreamlink T6 guide is terrible, hoping to use StbEmu instead.


not to mention the price..highway robbery

[ggotnomoney]

Ok so I just installed the 0.9 version and once it installed it immediately told me there was an update but when I click update it does nothing. If it helps I'm on the Nvidia Shield.

[zoboloff]

Thank you for your proofs, but the problem is always the same! As a technician, your application is not perfect!
Tested on several boxes android tv, always the same concern with the players!
Internal player does not pass! On the whole box android 6.xx! Why should I install only player?
321 player? Vlc?
Etcc and especially you have a problem of 16 /9eme
format


v0.9.03
* Fixed authentication issues on Android 4.4

This update fixes authentication issues on Android 4.4 for those who couldn't log in. After you've installed the update please check that <profile config>->Advanced settings->"Fix AJAX support" is enabled. This option is required for Android 4.4, but if you have another version you may also enable it if you want to use external services (YouTube, etc).
Also if you have Android 4.0-4.4 you may disable option <profile>->Advanced settings->Apply CSS patches->"Fix invisible login/password in Stalker", because it breaks authentication dialog on old Androids (it is still usable, but better to disable this option).

Free version
armv7a
https://mega.nz/#!5I4WxQjZ!pHBzeCazaYELG4OBJsXfm0UUBLwP_PVlx2RaBeR v-uQ
x86
https://mega.nz/#!9VIAHbJB!FLC4SY0WSmOeri4uOXoGO-nyUjD6MuzY-yjZJvNIe8A

NFPS
armv7a
https://mega.nz/#!kUpGSRrL!ejQjw7F4fTLQ2Y4pfpTK8_WBz01saxGCwL0fyyR SijY
x86
https://mega.nz/#!wFRHgQLQ!N8kxGN8BJ9O7A2R3bEHjZvBR09hmdyUkHOvdZw3 Hkf0

Rocket
armv7a
https://mega.nz/#!1UBG3aIQ!nnk90_lSWjJqTXrq4m9C1NCtivUi72WU7YigK4R IguU
x86
https://mega.nz/#!JNI2EJBQ!_NzoxnIGIAnMN0QC93Xjeo-jGiNKYOO-w4gq4ZL7ewU

iptv66
armv7a
https://mega.nz/#!tB50xZTD!1fuRKEOhevL4rLC83aPaAhpyS2QG_GCp3nVEE4A GLmM
x86
https://mega.nz/#!dIIyHTAB!rT3E6i06kZaAxXsS-HihE3r33T4nBr8k-Le8NDJydek

[Drewcifer]

Hi this is my first post, I'm new to using IPTV. I purchased a plan from a reseller on ebay. The instructions are to use http://66.iptv66.tv along with user/pass # and a Mac address. The Mac Address he sent me starts with 00:1A:79:28, however, I've noticed that a lot of these instructions are saying it should be 00:1A:78:28 (the difference being 78 instead of the 79 I was sent.) I checked the status of my Mac using the route checker thingy, everything seemed to be good, I even did a reset successfully when trying to troubleshoot my problem, which is this — I'm also getting the "Your STB is blocked. Call the provider." I've tried all the troubleshooting suggestions and it doesn't help (made sure URL was right, Mac was right, enabled the "let device send out info" setting, nothing seems to be working." I'm using StbEmu on a garden-variety Nexsmart N32 running Android 5.1. I couldn't get it to work in Kodi using IPTV Stalker Plus after following, to the letter, many online guides. Any thoughts?

[crazed 9.6]

00:1A:78 prefix is for Stalker apps and that STB Emulator
00:1A:79 prefix is for Mag receivers, avov receivers and Dreamlink T1 receivers.


When using the STB Emulator, you can generate your own MAC as long as the prefix is 00:1A:78

With that STB Blocked issue, go ahead and generate a new MAC and add that on the website checker thingy and also onto your Emulator.
You can also add the new iptv66 server URL

Check Announcment forum for the new URLs and some STB Blocked fixes.
Check my signature shown below, for the MAC generator (the announcement forum is also linked below).

[Drewcifer]

Thanks so much, that MAC change did the trick, Emulator is working great, a few random channels not working but I fully expected and understand that. The value is outstanding. I'm thinking I could start reselling this kind of service to the customers who purchase my "kodi boxes." So far I'm very impressed, a month ago I didn't know services like this even existed.

[pod77]

Thanks so much, that MAC change did the trick, Emulator is working great, a few random channels not working but I fully expected and understand that. The value is outstanding. I'm thinking I could start reselling this kind of service to the customers who purchase my "kodi boxes." So far I'm very impressed, a month ago I didn't know services like this even existed.

Just remember if your decide to go into business and start being a reseller the last thing you should do is tell people to cancel there cable TV subscription and this can be there only source for TV.. If you do you should be prepared to tell them that channels come and go and this does have issues from time to time.. If you don't do that your asking for nothing but trouble and your phone will be running off the hook when there are issues... Some resellers think this is a get rich quick scheme and do not do the above and then come on here and complain that there customers are calling them constantly...

[johnny22]

Does not take p2 server is there a fix?

[johnny22]

Does not take p2 server is there a fix?

p2.???? gives server error, is there a fix? cannot change portal either

[PcPhoneTek]

Question on nfps cannot change the default portal from 11 to P1 or P2 won't accept letters?

[calbo]

i install the new stb,emu... all went fine but the remote freez afet every minite.
i have to wait before it responde. i using a T-BLAZE android box.6.0.1

[hotwarmguy]

is 9.0.5 better?
Where can I download the new version of emulator 9.0.5?

[pitboss]

is this player auto updating anymore

[JimBoDunn]

It does for the pro version. Cant say about the free version. You can find the newest version on google play store which is v1.0.3.

[Acf150]

I just updated to version 0.9.01 and everything was working great yesterday. Today I woke up and when I turned on the STB emulator there is no guide info on any of the Channels. What happened? How can I fix this. Yesterday almost all the channels I watch or U.S Channels had guide data on the bottom of the little screen when clicking through channels. Today I have no guide data on any channel. Again I'm on version 0.9.01/ STB iptv66 / on invidia shield. It's been working great until today. Please let me know if I should just wait or if not how can I fix this. It's been a great guide and getting better Mr. Mvas, but I need help with this issue, Thank you Is this Stb by Mvas still working or is it not? Thing is I've had my sub from iptv66 and I've always been using this Stb and it was working pretty good at first. But after one of the updates or url change I can't watch anything without it freezing every 1-5 minute. Is it the service? I'm on iptv66 I put in the new url http://s1.iptv66.tv/c and it's constant freezing to the point where I can't watch anything? Its been like this for a long time now that I've kind of given up on it. Am I supposed to be using another stb emulator? Is the Stb by Mvas deprecated? I haven't been on here for a while. Can someone please tell me how to fix this issues please? As I'm not to savvy with this. Again I'm using the Stb from here, the iptv66 one on an Nvidia shield? Any help would be great so I can use what's left of my sub. Thanks

[Acf150]

I just updated to version 0.9.01 and everything was working great yesterday. Today I woke up and when I turned on the STB emulator there is no guide info on any of the Channels. What happened? How can I fix this. Yesterday almost all the channels I watch or U.S Channels had guide data on the bottom of the little screen when clicking through channels. Today I have no guide data on any channel. Again I'm on version 0.9.01/ STB iptv66 / on invidia shield. It's been working great until today. Please let me know if I should just wait or if not how can I fix this. It's been a great guide and getting better Mr. Mvas, but I need help with this issue, Thank you I'm having a problem now after uninstalling the iptv66 stb emulator from here since all I got was unwatchable freezing. I got Version 1.05 pro version from Smash and set it up with my new Mac after changing it and doing an iptv66 reset. But now the overlay buttons are not showing up on the screen? I can only use the remote that comes with the Nvidia shield. Still no overlay buttons showing up. Is there a way to fix this? Anyone please I'm about to give up on stalker. As it is to much of a headache. What am I doing wrong is the Stb emulator still working with iptv66? Or should I be using something else? And what would be the best to use with iptv66 provider? Very frustrating

[lokito50]

Does not take p2 server is there a fix?
hey did you find a fix? I'm on p2 as well and just downloaded the nfps version of stbemu but it's not letting me change the portal url....keeps saying url invalid.
Anyone else know how I can fix this?

[Lobo101]

I am using your stb for iptv66 and it was working for me . But today 3/11/19 when i opened it i get.
Host http://s2.iptv66.tv/ not found.
Is there another one i can use or what can i do

[Bkman2020]

Change S2 to S1works well .

[Astra]

it's asking for an update how i update?

[Bkman2020]

What kind of update ?