How to adjust date and time on your Stalker portal

[theone]

Credit goes to Brooklynman2020


Enter the “System settings” - by pressing «Setup», «Services» or «SET» on the remote control (depending on the version the remote control)
- Select “Servers”
- In the input field “NTP server” enter "pool.ntp.org"
- Confirm “OK”
- Reboot mag250

[zensat]

Credit goes to Brooklynman2020


Enter the “System settings” - by pressing «Setup», «Services» or «SET» on the remote control (depending on the version the remote control)
- Select “Servers”
- In the input field “NTP server” enter "pool.ntp.org"
- Confirm “OK”
- Reboot mag250

Grazie......i was going crazy to set correct time zone......

[Bkman2020]

Thanks for the credit falcon99

[Liko2]

It's still not giving me the right time... The date is good but the time isn't...in the portal it's 5 hours a head... Don't know why

[zensat]

It's still not giving me the right time... The date is good but the time isn't...in the portal it's 5 hours a head... Don't know why

try this address

98.143.24.53

[Liko2]

Nope still the same

[muchacho]

You have to set your contry and your city and your océan in set up on the rc

[itjustme1]

thank work great thank folcan99

[magnate]

same here thanks folcan

[Tony47]

mine is 5 days and 12 hrs ahead

[jimmyboscom]

Thanks!!!!!!! I used the first option and it worked.

[jimmyboscom]

Thanks! Helped me. For some crazy reason, I could not get the date and time on the screen. Now my date, time and weather are all displayed on the screen.

Thanks Moderator and Brooklynman2020!

[bigdummy]

no luck with those 2 time servers .
I used time.nist.gov and now is working properly

[Marley]

got to try that one

[charlesk]

I fallow post #1 and working great on the Mag254

[knabis86]

I tried first the one from pool. but that server never worked.

I used this one: 98.143.24.53 and it worked great after rebooting. thanks!

[suncomkid]

Used post #1 and worked great....Was driving me nuts!!!!
TY

[scorpiad]

Works great here. Thanks Falcon

[berchan]

not work for me, when i reboot my mag254 persist same day 30 december 1999

[K00lKatT]

It does work if you do it properly, thks

[cpr43]

not work for me, when i reboot my mag254 persist same day 30 december 1999

It happens to me on my (2) 254 and try several times. Finally I unplug from the power both my internet modem and the Mag and let them rest for some time. When I plug everything back the date/time was fixed. :)

[K00lKatT]

you must also have the localization done, country, city, etc...

[berchan]

you must also have the localization done, country, city, etc...

yes,i already localization configured , but same problem

[berchan]

my configuration

i try to change city to San Juan but change automatically to Abbeville

[prestige01]

used 98.143.24.53 worked good after reboot , for some reason pool.ntp.org would not work,

[theuduk]

Berchan after putting in San Juan were you able to go down and click the OK button?

[berchan]

Berchan after putting in San Juan were you able to go down and click the OK button?

when i press ok, automatically appears Abbeville and change automatically time zone to america/chicago

[berchan]

used 98.143.24.53 worked good after reboot , for some reason pool.ntp.org would not work,

I'll try, ty

update:
nope, same problem, I think the problem must be my ISP (firewal or something else)

[berchan]

there is no way that i can enter the date and time manually?

[LLAMP-TV]

gracias voy a testar!..

[LLAMP-TV]

como poner free server en la box mag250!..

[Kimbo]

Vea este video y si todavia tiene preguntas me dejas saber:

http://iptvtalk.net/showthread.php?1405-How-to-use-MAG250-Video-tutorial

[jarodrig]

Berchan after putting in San Juan were you able to go down and click the OK button?

I have the same problem.....In that I can't seem to set "city", no matter what I try.

Time Zone is set correctly and the date and time are now correct thanks to the first post in this thread. For that I "thank You"

City still eludes me though.....it probably does not matter much.....

[wickedjoker]

I have the same problem.....In that I can't seem to set "city", no matter what I try.

Time Zone is set correctly and the date and time are now correct thanks to the first post in this thread. For that I "thank You"

City still eludes me though.....it probably does not matter much.....

Yeah I have the same problem with my MAG 254 I can set the date and time with the instruction given but the city is a no go I have been scouring the inter-webs trying to find something but have not had any luck.

[Marley]

I cant find my city so use the ones they have

[theuduk]

Try putting in a fairly large city closest to you, in outer portal seems to be more limited than inner for choice of location.

[bobhun]

Thanks for the correct NTP server address pool.ntp.org it worked for my 3 Mag254 boxes. Localization setting worked only after I first changed language, country and time zone ............then lastly, for city I then input via keyboard the first 3 letters of my major city and it then provided me 2 choices and I selected mine and rebooted. Only issue is that temperature is not correct and seems to be locked onto 22 deg C.

[berchan]

For Puerto Rico , i fix it put in country and city Santo Domingo (fix only date and time)
update: turned damage again.

[mani49ers559]

Would this be the same for the emulator because I select L.A west coast but it keeps going to another country

[MrX4000]

Something seems alittle messed up .. Got my date time city all input correctly and the timezone keeps going back to Kiev??? Should be Eastern time / Detroit .. even tried Toronto. City stays, Timezone keeps going back to Kiev. So needless to say the guide times are all messed up. By about +6 hours

[Marley]

they have a better one than this correct NTP server address pool.ntp.org just cant find it now

[Marley]

try this its c/p
After doing some reading I found that if you change the server from pool.ntp.org to time.nist.gov and reboot the box and it will show the correct date and time to your setting.

[stuygang]

Thanks Folcan99

[razorburn]

Thanks--maybe make a sticky from this? It works

[juancamole]

Hello everyone. Thanks a lot for all the suggestions in this thread, I'm having the same issue as some of the users here, but nothing has worked for me yet.
My country is only an option in the inner portal, but not in the portal from my provider (iptvrocket), so I found a country that's in my same time zone as I am and that exits in both country lists. Belize was the only option.
What I have tried from inner and outer portal:


Set the NTP server to: pool.ntp.org (and do a reboot)
Set the NTP server to: 98.143.24.53 (and do a reboot)
Set the NTP server to: time.nist.gov (and do a reboot)
Set the NTP server to my local servers (I'm from Costa Rica): 1.cr.pool.ntp.org for example (and do a reboot)
Unplug my MAG254 and the router for several minutes.
Factory reset.
Change localization to Denver (same timezone as Costa Rica) and retry.


The weather information loads fine, but I'm still on December 31, 1999.
My MAG254 is on version 4.9.22 (0.2.18-r12-254).

Is there any other things to try? Could it be my ISP?

Any help will be much appretiated.

[cassinni]

hello,

on my inner portal the time works but not the weather because it lets me choose my city but i cannot save it when it opens the google maps view, on my provider the weather works but not the time and i think thats the reason why i get a channel count on my provider portal but the channel buttons are blank, i dont know what to do. I did everything to the guide for mag254.
always pressing ok after changed settings, latest official firmware, 100mbit wired internet. please someone help

[La bamba]

Thank you very much, I am new to this Forum I just joined today. La Bamba
Credit goes to Brooklynman2020


Enter the “System settings” - by pressing «Setup», «Services» or «SET» on the remote control (depending on the version the remote control)
- Select “Servers”
- In the input field “NTP server” enter "pool.ntp.org"
- Confirm “OK”
- Reboot mag250

[FLOTADITO]

"Time on the device is not synchronaized" is driving me krazy what can I do to not have the massage all my clients are caling me and Not actualy in a good mood

[xbmcbg]

Do not sell things that do not understand and can not control them.

[aevt628]

thanks awesome

[tdotto]

Credit goes to Brooklynman2020


Enter the “System settings” - by pressing «Setup», «Services» or «SET» on the remote control (depending on the version the remote control)
- Select “Servers”
- In the input field “NTP server” enter "pool.ntp.org"
- Confirm “OK”
- Reboot mag250

Works like a charm. Thank you!

[T-rex]

It's not working for me.. well you help me out

[Marley]

Just in case if you have the same problem as me then try this.
After doing some reading I found that if you change the server from pool.ntp.org to time.nist.gov and reboot the box and it will show the correct date and time to your setting.
Worked for me.

[rover1]

I have tried all of these suggestions. None have worked. The time still shows December 31, 1999, 6:01pm

[tk421jag]

I've tried all of these options in this thread. All of my times are set as they should be. My time and location are correct on the inner portal and all settings areas. My guide is always 5 hours off though. It was working, a few months ago but for some reason reverted back 5 hours and nothing seems to change it. I've tried offsetting the time by 5 hours and it still has the guide off by 5 hours.