IPTV StbEmu Release thread - All Versions

[LEAFER9999]

ok not sure about that and will take another look thx

[mclass555]

Mvis. Thank you very much for responding. I applied the css patch over a week ago. I am able to see the password now but clicking the ok does not do anything. The ok button is not responsive. Others have reported the same issue. So we are not able to log in. Can you fix it with 8.05 version please. This is on nexus player.
are you using a mouse? i have it working on my nexus player and it works great with a mouse

[atlas1321]

I tried both a wifi and bluetooth keyboards. I am able to enter the login info and get the ok button highlighted. However pressing enter on both keyboards with the ok button higlighted does not make it do anything. Using the player remote does not make it do anything either. It does not respond to a usb mouse at all in terms of entering info. The mouse can only select the options at the right of the screen.
Are you using the css patch?

[mclass555]

I tried both a wifi and bluetooth keyboards. I am able to enter the login info and get the ok button highlighted. However pressing enter on both keyboards with the ok button higlighted does not make it do anything. Using the player remote does not make it do anything either. It does not respond to a usb mouse at all in terms of entering info. The mouse can only select the options at the right of the screen.
Are you using the css patch?

The mouse can select ANY option on the screen dude.Use the "ok" button that flashes up on the screen when you get it highlighted with the mouse using either the "up or down" buttons on the screen, not the keyboard not the remote. And you can use it with or without the css patch. Using the patch just makes what password numbers visible on the screen.

[Carrne]

I am getting this error when running iptv66 emulator.

ERROR!
Host
http://66.iptv66.tv/ not found

Is this an app error or what?

[highbury1]

Mvas great job with emulator, small bug found. set to external player, channels plays no problems but when you exit and return back to channel list, I'm getting black screen.

Also if you can set the VOD to use "external player" and tv channels to use "auto" or "exo" automatically that will make this version emulator work perfect!

[mclass555]

Mvas great job with emulator, small bug found. set to external player, channels plays no problems but when you exit and return back to channel list, I'm getting black screen.

Also if you can set the VOD to use "external player" and tv channels to use "auto" or "exo" automatically that will make this version emulator work perfect!
on my nexus player i have to use the back button twice to get to the channel list, try that

[highbury1]

mclass, just try it, pressing back twice takes me back to main screen. I can get it to work properly if I go into tv channel, set the media player to "auto" or "exo" and then change back to "external" if works perfectly until I restart the emulator.

[highbury1]

mclass, just try it, pressing back twice takes me back to main screen. If i'm in the channel list and I set media player to "auto" or "exo" then change back to "external" everything works perfect until I restart the emulator.

[messiahman]

I have the exact same problem. Using external media player (mx player) pressing back brings me to a black screen instead of channel listing. Pressing back a second time takes me to the main screen. Hopefully this gets fixed in next version. Thanks for all your work to improve this program mvas. Greatly appreciated!

[gojkob]

Hi, i have issue with new Stalker Portal 5.0.1, there is no loading, just black screen.

[dalibortp]

Hi, i have issue with new Stalker Portal 5.0.1, there is no loading, just black screen.

Yes, same here, and there is problem on android 5.1, internal player not working and apk is unstable, sometimes crash randomly...

[mvas]

v0.8.05
Change list:
* Updated Exo player to v1.5.9.
* Added password protection for settings (disabled by default, default password: 0000).
* Fixed compatibility with Stalker v5.0.1
* Fixed compatibility with some other (not based on Stalker) portals.
* Fixed Auto player in some cases selected wrong player to play a stream.
* Fixed some Android 6 and N compatibility issues (the app couldn't read device's storage).
* Fixed empty action list in key maps editor.
* Fixed some other minor bugs.

Free version:
armv7a
https://mega.nz/#!VZBxVarR!Cg_4wKOAqSxQoznYq_sKPW55bxf-m6LdFXjpRIb5z00
x86
https://mega.nz/#!lMhnBBbY!eh1PV403tBtaBKDtilnbZlvOqIC3jkcuqOpXxOT 7ApM

NFPS:
armv7a
https://mega.nz/#!gRo1AICI!rltV_3egRfabU7Q5hlTBme7rbu-6HyzyN7XEHDP6_1A
x86
https://mega.nz/#!sYgGVSQA!4l4JMM5xZEIvB0gHj79pflkAJk7SnIwkRtGY-qy5l-Y

Rocket:
armv7a
https://mega.nz/#!4dRDWBCB!kQcyv16mZxATDjsw7btv6P06NujewwTflNZ7-UKt4w0
x86
https://mega.nz/#!hJBmHRRA!ViBlQfNeolSXOraon7k3T6M9hJJ8XxV0UwMOrHn aL7s

iptv66
armv7a
https://mega.nz/#!tcZX3T6I!eW0xTdWL5Vh2mxHJGmGOj3YBRbDCeZhEnLsCeLK zoJs
x86
https://mega.nz/#!EdwwlBAA!xzQsR-sGDs_ZnqEs97zprOOTkZP5SicPlVNsJ47dWwE

[Marley]

thank you will check one out

[jorostr]

Tested the 8.0.05 but I have the same problem as the 0.8.04. This is when I try to get Full Screen, it remains in little screen and all around is black.

I'm using it in Note 4 Android 6.0.1

It is only me with this issue?

Thank you!

[jorostr]

Well, it seems that my problem about when I press OK to make Full Screen the screen remaining little and all around black solved when I purchase the PRO version from PlayStore.

Now I can see it in Full screen!!!

Just 1 thing. I use Spanish as language in my device. And the app use System Default if I use that option the "Mediaplayer" letters change to @12384826 (or something like that). If change the langiage in the app to English "Mediaplayer" sees as Mediaplayer (normal), but not all the times.

Please Mvas Links the spanish language to the English letters, so in that way the people that use Spanish in their devices will see "Mediaplayer" and not @1238469

Thanks for all!

[Gilmey]

hello i have a question hope someone can help me i bought the pro version-one of the reasons is for the remote options
when i use my tablet i can use the mag250 remote app on my phone to control the emulator on the tablet
but win my android box thats connected to the tv when i start the stb emulator it says that it cant start the remote service becuase it cant find a valid media interface
any idea why???

[kencho]

v0.8.05
Change list:
* Updated Exo player to v1.5.9.
* Added password protection for settings (disabled by default, default password: 0000).
* Fixed compatibility with Stalker v5.0.1
* Fixed compatibility with some other (not based on Stalker) portals.
* Fixed Auto player in some cases selected wrong player to play a stream.
* Fixed some Android 6 and N compatibility issues (the app couldn't read device's storage).
* Fixed empty action list in key maps editor.
* Fixed some other minor bugs.

Free version:
armv7a
https://mega.nz/#!VZBxVarR!Cg_4wKOAqSxQoznYq_sKPW55bxf-m6LdFXjpRIb5z00
x86
https://mega.nz/#!lMhnBBbY!eh1PV403tBtaBKDtilnbZlvOqIC3jkcuqOpXxOT 7ApM

NFPS:
armv7a
https://mega.nz/#!gRo1AICI!rltV_3egRfabU7Q5hlTBme7rbu-6HyzyN7XEHDP6_1A
x86
https://mega.nz/#!sYgGVSQA!4l4JMM5xZEIvB0gHj79pflkAJk7SnIwkRtGY-qy5l-Y

Rocket:
armv7a
https://mega.nz/#!4dRDWBCB!kQcyv16mZxATDjsw7btv6P06NujewwTflNZ7-UKt4w0
x86
https://mega.nz/#!hJBmHRRA!ViBlQfNeolSXOraon7k3T6M9hJJ8XxV0UwMOrHn aL7s

iptv66
armv7a
https://mega.nz/#!tcZX3T6I!eW0xTdWL5Vh2mxHJGmGOj3YBRbDCeZhEnLsCeLK zoJs
x86
https://mega.nz/#!EdwwlBAA!xzQsR-sGDs_ZnqEs97zprOOTkZP5SicPlVNsJ47dWwE

CSS Fix for invisible password not working on STBEmu v0.8.05 (Was working on v0.8.04)
STBEmu still Not compatible with Stalker 5.0.1

[TK-8Banditos]

HI everyone, can someone help me? I do the emulator (rocket) on my T6 but when I'm been ask for the authentication login and password I can't type in, the number don't appear at all, I try a keyboard, remote, the keyboard inside the emulator and my mouse and non work, any ideas on what can be wrong? I'm using 7.14.02

Thank you.

You have to update the software to 8.05 to use the authentication...
That is my problem I have only been able to download the latest update onto one of the 3 devices that I have tried.
I have a T6 that has the STBemu working but it prompts me to update every time I start the app but just spins and spins forever.
I tried a new install yesterday on an MXQ and it did the same thing, it just downloads forever.
I cannot get the MXQ working as I cannot change the portal address.
Does anyone know where to find 8.05 so I can d/l with my pc and load with usb?

[lecien]

voice keeps delaying...how can i fix

[jorostr]

voice keeps delaying...how can i fix

Use MX Player as External Player. There that delay is fixed.

[hotwarmguy]

file links are not working.

[nocola]

I keep getting an error when I try to login to IP66. I have tried 04 and .05. I type in my username and I can't type in my password. I hit enter I get error. When I use kodi it works. I am using an Amazon Fire Box not the stick.

[Tycoon77]

I followed all instructions and when I restart my stb I get authentication login and password

[atlas1321]

How do i record using the emulator
Thanks

[mvas]

v0.8.06
* Fixed compatibility with some portals on Stalker 5.0.2
* Updated Ijk player to v0.6.0
* Some bug fixes.

Free version
armv7a
https://mega.nz/#!cd4kWR6Q!CYoarH8rLCRdF5L_zOm9gy8T4WgxDmphyQAc3Pa zgMo
x86
https://mega.nz/#!AVREFKQK!POSsTbMDclc3Tumg8T0KBqETSJgo-qA1k88m3v10uvE

NFPS
armv7a
https://mega.nz/#!BEQB1JQa!ZyQNSC6PB4yF9T2oIv3XSU-g8HxA6dkfQaE-b3gSJxE
x86
https://mega.nz/#!tE4lgaaQ!4mpt3QwNX4MayDL3h9r9HRYWy2qbvyXlsFZUJqJ ke9I

Rocket
armv7a
https://mega.nz/#!sVRlnBLK!rqYE61Eh-BM-XtRu71koTe4CH9eb1ni93GjwZazEyR4
x86
https://mega.nz/#!VBAAmb7Z!8--pNfRZdTSPs8HN0zpcawp3vG1FpWHp3MZvZYnxyOQ

iptv66
armv7a
https://mega.nz/#!5BJTXRqD!7b0ekOIr6Cez704m2wQ8Q7T6JahoKFUvVfunCF5 l4Ls
x86
https://mega.nz/#!IchkiKjb!KtK7_m6pr2vWVXR_Nm0sRWBFk7QmS0noz1KV_9s xWK8

[superbob]

OTA update without issues, thank you for the ongoing support/maintenance.

[skamruzz]

Hello, Is the STB Emulator pro fixed too with the loading issue?? It seems like it is fixed with free version.

[DesiTV]

Hello mvas,

I am using STB Emulator Pro on my Fire TV stick. About 5 days ago, my STB emulator stopped working as expected. When I load the application, I simply see blank black screen.

Will installing the above mentioned v0.8.06 fix the issue I am facing?

I think my Fire TV stick has armv7a. Can you tell me which one from your list (Free version, NFPS, Rocket, or iptv66) I need to download?


Thanks in advance!

[mrgreg]

Hit the menu button on your remote on the black screen and the settings menu should show up on the screen.

[jflorest]

Hola

Mi emulador STB PRO en la Fire Stick aveces no abre, es decir inicia y se cierra sola sin pasar de la pantalla negra. A veces hasta el 5to intento se logra conectar. Ayuda.

[mvas]

Hello, Is the STB Emulator pro fixed too with the loading issue?? It seems like it is fixed with free version.

All versions of the emulator have the same emulation code, so if some bug is fixed in one of versions, this means it is fixed in all of them.

[mvas]

Hello mvas,

I am using STB Emulator Pro on my Fire TV stick. About 5 days ago, my STB emulator stopped working as expected. When I load the application, I simply see blank black screen.


Usually if you don't see anything on the screen, if means that there is something wrong with profile's configuration, your device's network connection, or with a portal you use. Try to open portal's URL in your desktop browser to check if the portal works.



Will installing the above mentioned v0.8.06 fix the issue I am facing?


Not sure, because this update fixes some issues with Stalker 5.0.2 in one of the final stages of loading.



I think my Fire TV stick has armv7a. Can you tell me which one from your list (Free version, NFPS, Rocket, or iptv66) I need to download?
Thanks in advance!

armv7a. Use any of them depends of what portal you want to use.

[alps]

still getting "Your STB is blocked. Call the provider"

[highbury1]

channels are auto playing in the channel list (with my server anyways), any way to fix so it only play when ok is press. thks

[midaryl]

still getting "Your STB is blocked. Call the provider"
I was running along just great for months, now for the last couple day I get the same message, ugh!

[alps]

I am down for more than 1 month and this emu is not working always getting "Your stb is blocked", what a pain.
I have reset my donation number change the port but nothing is working.

[mrgreg]

Clear the cache on your IPTV app, force close it after you do this, back out of the app. Then go to Papiao, reset IPTV, then reopen the app and your user password screen should come up, put your info in and you should be good to go. Some times you have to put the username, password twice but it should work.

[alps]

Thanks I did the same but didn't help.
I will try doing the same and will try my luck

[shambala]

Hi I installed version 8.06 and the sound is falling out of sync quickly and by far is there any fix for this or is it something that I am doing wrong.

[djsolospins]

Mvas...I have a question I know nfps server 2 & 3 are back up and running ..the stb emulators are not connecting to them they seem to have a stb blocked error. My question is will there be an update for the emulator or is there a setting that could be fixed within 8.06 to correct this issue... other than changing the portal because obviously you guys are going to be fixing Portal 1 4 5 soon.. One thing I did notice .. you won't get the stb blocked if you use 00:1A:79 on the Mac .. channels don't play cause you need to use 78 in the address .. That's when it becomes blocked .. :(
Please advise ..!!!
thanks

[dhed]

this is exactly what I found also
Mvas...I have a question I know nfps server 2 & 3 are back up and running ..the stb emulators are not connecting to them they seem to have a stb blocked error. My question is will there be an update for the emulator or is there a setting that could be fixed within 8.06 to correct this issue... other than changing the portal because obviously you guys are going to be fixing Portal 1 4 5 soon.. One thing I did notice .. you won't get the stb blocked if you use 00:1A:79 on the Mac .. channels don't play cause you need to use 78 in the address .. That's when it becomes blocked .. :(
Please advise ..!!!
thanks

[contentryder]

There is no Device ID configuration in settings of latest update. 0.8.05 or 0.8.06

[hotwarmguy]

There is no Device ID configuration in settings of latest update. 0.8.05 or 0.8.06

Device ID is preset for those versions.

[BttlKat]

hi mvas! Thank you for a great app! I am testing your app (StbEmu (Free)) on my minix X7 running KitKat (Latest firmware). I am thinking of purchasing the Pro version but have one issue first. If anyone here can assist that would be great too.

I have no trouble getting a channel list and EPG so I think I set everything up correctly and I can watch some channels but not many. A lot of channels stay blank and won't load when I click on them. The channels I DO see are clear, like HD, and smooth playback so I'm thinking the app is not decoding some channels or even attempting it.

I know the portal info (Mac..Code..etc) I am using is good because it works in Kodi, all channels load there and are view-able.

Maybe I have to use a different media player setting? I have to install a certain Media player onto my Minix first?\ I was going to keep troubleshooting on my own but thought I would ask for recommendations.

I am using NFPS portal data emulating MAG 254 on Minix X7 (Android box).

Thank you. :D

Edit: Maybe its the portal I'm using?.... I'm using NFPS Portal 4. I can try changing that to something else for testing.

[hotwarmguy]

hi mvas! Thank you for a great app! I am testing your app (StbEmu (Free)) on my minix X7 running KitKat (Latest firmware). I am thinking of purchasing the Pro version but have one issue first. If anyone here can assist that would be great too.

I have no trouble getting a channel list and EPG so I think I set everything up correctly and I can watch some channels but not many. A lot of channels stay blank and won't load when I click on them. The channels I DO see are clear, like HD, and smooth playback so I'm thinking the app is not decoding some channels or even attempting it.

I know the portal info (Mac..Code..etc) I am using is good because it works in Kodi, all channels load there and are view-able.

Maybe I have to use a different media player setting? I have to install a certain Media player onto my Minix first?\ I was going to keep troubleshooting on my own but thought I would ask for recommendations.

I am using NFPS portal data emulating MAG 254 on Minix X7 (Android box).

Thank you. :D

Edit: Maybe its the portal I'm using?.... I'm using NFPS Portal 4. I can try changing that to something else for testing.

Maybe mediaplayer. I use internal player for my old android box.
it is in Menu options

[mvas]

v0.8.07
* A lot of optimizations. The app should work better for most users.
* Updated Ijk player to v0.6.1.2
* Added support of MAG 256.
* Fixed slowmo when starting playing a stream in Ijk player.
* Fixed internal update service.
* Fixed support of MAG's internal portal.
* Fixed support of software remote controls.
* Fixed incorrect preview window position in some cases if using auto player.
* Fixed aspect ratio in auto player.
* A lot of bug fixes.

Free version
armv7a
https://mega.nz/#!MdwlhbqD!P8NaP7z70vsit0sCcf-loBc3R_5nrNOiGpNiMtngfMs
x86
https://mega.nz/#!NdhW3DaS!1uEQkvyBeXJCDA6901ofcxJa0sLZfI11noY-mv5MYE8

NFPS
armv7a
https://mega.nz/#!9Uwy3ASR!TokR-d4f4FKlGjL1urlaDItlaczJyi23FQWmSVu1Nuo
x86
https://mega.nz/#!NVQAhDQC!Iv5uP2jxZfgqCm9AJ-2yevy5MzVDTfF6FvmldPwzWQQ

Rocket
armv7a
https://mega.nz/#!kExhSb5I!h6zmLLgMXy5__vZe1kmmjQM3HY9MfydyYzXEbNF nBFU
x86
https://mega.nz/#!9cJnmAgR!bDEDDtKaErmr9yIIx-yTJB1dILX8Ulp88sOjXLd9PtA

iptv66
armv7a
https://mega.nz/#!QAQglJTS!G5yXW0kufFtv8981evOY5pG0832FFpFtFJAsIyL VOU8
x86
https://mega.nz/#!lJxxRYxS!z6vmwBqib2bri4Y2Slk6VrfnOWcXAdOnw2rM-slewGg

[Marley]

dang was just asking about you today thankyou

[hotwarmguy]

when I exit 8.07 emulator and restart yellow bar dean't finish so I cleared cache then it works.
Please contact your provider issue still exit on one of my old android 1gb ram version 4.4

[Marley]

its guess try 78 if 79 or other way around for mac and do a ip reset

[hotwarmguy]

its guess try 78 if 79 or other way around for mac and do a ip reset

Yes I tried reset iptv, change mac address, unplug power cable, change donation numbers.
android 5.1 doesn't have Please contact your Provider message but it doesn't load send time when I exit it.
android 4.4 keep saying Please contact your Provider when I unplug power cable, but it loads fine when I exit it.

[Marley]

old one have new emulator too ? and you used the right one for it

[hotwarmguy]

old one have new emulator too ? and you used the right one for it

yes both has 8.07

[mvas]

when I exit 8.07 emulator and restart yellow bar dean't finish so I cleared cache then it works.
Please contact your provider issue still exit on one of my old android 1gb ram version 4.4

Try to disable network cache (Settings->Common settings->Network settings).

[hotwarmguy]

Try to disable network cache (Settings->Common settings->Network settings).

It worked for android 5.1 box. It is loading even I exit it.
But my android 4.4.4 box still saying Please contact your provider when I unplug power.

[johnny22]

mvas:

NFPS armv7 does not download adult channels that gets downloaded on Kodi. Could you please provide an update that resolves it?

[Bobpopovich]

[QUOTE=johnny22;156443]

Hello, I downloaded the stb emulator and when I go to any channel then it goes out of the stb emu.

I am using nfps 8.07 stb emu

Can someone tell me if there is a fix so I can use the paid service with the stb emu in my matricom gbox q?

Let me know.

[4ktvfan]

Have a brand new Dreamlink T6 and of course it doesn't have a stalker or any way to get one in it's existing software. So is this stbemu the way to use my nfps donation for iptv? Can I also use iks (if I EVER figure out the password/deskey setup thing?)

For a "virgin" box, what steps do I actually take to get this stbemu to work, assuming it does work for the DL T6. I've downloaded the "free" armv7 nfps file but not installed it yet.
Thank you.

[djsolospins]

Mvas.. there's a slight issue with release 8.07 the issue that I found continuously is that the connectivity begins to fail.. it begins to load then right before it finishes it freezes.. 8.06 does not have that issue hope this help somebody or maybe you could address this issue as well thank you

[4ktvfan]

tried to load the .807 into a brand new T6, but the T6 is not recognizing the USB thumb drive, even though a USB keyboard works ok. Yes, it's formatted to fat32, verified by a Linux box and a Winblows box. Any ideas to to get the T6 to read the USB drive????

thanks.
no video so far. Some limited success prior with an Rpi and Kodi, until IT stopped working as well. that's wny I bought the stupid T6. Damn, I wish there were some SIMPLE directions somewhere, all in one place, all easy to understand. This is W-A-Y too complicated just to get some TV that we paid for. And trust me, I've been involved in projects WAY more complicated than this, but with better background knowledge and help.

(and these automatic logouts suck, too)

[pokermasterd]

Hi after loading .807. I did get it to work but have a few small things going on in my android box. 1 my remote would not work to enter username password sort of. When i was on a line could enter text fine but would not go to next line tell i used on screen keyboard then back again to go OK. also my screen shows channel list in black and white very messed up did i miss something took along time to get setting right but after a week of no TV and no help from anyone else. Thanks for making this work again. After a week of no TV at least i can watch again.

[4ktvfan]

Only a week? I haven't had the service for almost TWO months now.

[pokermasterd]

i did get .807 working if your like me you will need to replace the old STB emulator will not work anymore. No one else here told me that. No help here at all tell this set of messages. Good news is fewer setting to get it up and running but there are a few small things get .807 set it up best you can then read all the messages here and deal with one thing at a time tell your rocking worked for me - my small issue noted above. as Well as this

Was working now it says contact provider to register box now what.

[4ktvfan]

Will that stbemu work on a T6 clone, which is what I *think* I have?

[hotwarmguy]

i did get .807 working if your like me you will need to replace the old STB emulator will not work anymore. No one else here told me that. No help here at all tell this set of messages. Good news is fewer setting to get it up and running but there are a few small things get .807 set it up best you can then read all the messages here and deal with one thing at a time tell your rocking worked for me - my small issue noted above. as Well as this

Was working now it says contact provider to register box now what.

yes I keep getting the same message, but I reset my mac address everyday to watch chs.

[Waafu]

After loading 0.8.07 onto my Dreamlink T6 I'm getting error when I load username and password.Anyone else having the same problem.

[the_jaguar]

0.8.7 is great! My buddy tells me that with this version the PPV movies are working again for IPTV Express! Thanks much! Any chance you can take a look at the "Catch-up TV section". He say that he doesn't see it anywhere on the list. Once again, thanks for all the hard work.

[yellows]

Need a link to download the 0.8.07 version please?
Thanks.

[yellows]

ok got it
New release 0.8.07
v0.8.07
* A lot of optimizations. The app should work better for most users.
* Updated Ijk player to v0.6.1.2
* Added support of MAG 256.
* Fixed slowmo when starting playing a stream in Ijk player.
* Fixed internal update service.
* Fixed support of MAG's internal portal.
* Fixed support of software remote controls.
* Fixed incorrect preview window position in some cases if using auto player.
* Fixed aspect ratio in auto player.
* A lot of bug fixes.

Free version
armv7a Code:
https://mega.nz/#!MdwlhbqD!P8NaP7z70vsit0sCcf-loBc3R_5nrNOiGpNiMtngfMs
x86 Code:
https://mega.nz/#!NdhW3DaS!1uEQkvyBeXJCDA6901ofcxJa0sLZfI11noY-mv5MYE8
NFPS
armv7a Code:
https://mega.nz/#!9Uwy3ASR!TokR-d4f4FKlGjL1urlaDItlaczJyi23FQWmSVu1Nuo
x86 Code:
https://mega.nz/#!NVQAhDQC!Iv5uP2jxZfgqCm9AJ-2yevy5MzVDTfF6FvmldPwzWQQ
Rocket
armv7a Code:
https://mega.nz/#!kExhSb5I!h6zmLLgMXy5__vZe1kmmjQM3HY9MfydyYzXEbNF nBFU
x86 Code:
https://mega.nz/#!9cJnmAgR!bDEDDtKaErmr9yIIx-yTJB1dILX8Ulp88sOjXLd9PtA
iptv66
armv7a Code:
https://mega.nz/#!QAQglJTS!G5yXW0kufFtv8981evOY5pG0832FFpFtFJAsIyL VOU8
x86 Code:
https://mega.nz/#!lJxxRYxS!z6vmwBqib2bri4Y2Slk6VrfnOWcXAdOnw2rM-slewGg

[gerardo66]

i found i bad issue
after load the channel the first time (android tv/android smart phone) the channel list can't load anymore ONLY after i clean the cache in the setting application of the android box/smart phone
is very annoying at the moment i can't find a fix
any suggestion will be very appreciate


ok got it
New release 0.8.07
v0.8.07
* A lot of optimizations. The app should work better for most users.
* Updated Ijk player to v0.6.1.2
* Added support of MAG 256.
* Fixed slowmo when starting playing a stream in Ijk player.
* Fixed internal update service.
* Fixed support of MAG's internal portal.
* Fixed support of software remote controls.
* Fixed incorrect preview window position in some cases if using auto player.
* Fixed aspect ratio in auto player.
* A lot of bug fixes.

Free version
armv7a Code:
https://mega.nz/#!MdwlhbqD!P8NaP7z70vsit0sCcf-loBc3R_5nrNOiGpNiMtngfMs
x86 Code:
https://mega.nz/#!NdhW3DaS!1uEQkvyBeXJCDA6901ofcxJa0sLZfI11noY-mv5MYE8
NFPS
armv7a Code:
https://mega.nz/#!9Uwy3ASR!TokR-d4f4FKlGjL1urlaDItlaczJyi23FQWmSVu1Nuo
x86 Code:
https://mega.nz/#!NVQAhDQC!Iv5uP2jxZfgqCm9AJ-2yevy5MzVDTfF6FvmldPwzWQQ
Rocket
armv7a Code:
https://mega.nz/#!kExhSb5I!h6zmLLgMXy5__vZe1kmmjQM3HY9MfydyYzXEbNF nBFU
x86 Code:
https://mega.nz/#!9cJnmAgR!bDEDDtKaErmr9yIIx-yTJB1dILX8Ulp88sOjXLd9PtA
iptv66
armv7a Code:
https://mega.nz/#!QAQglJTS!G5yXW0kufFtv8981evOY5pG0832FFpFtFJAsIyL VOU8
x86 Code:
https://mega.nz/#!lJxxRYxS!z6vmwBqib2bri4Y2Slk6VrfnOWcXAdOnw2rM-slewGg

[gerardo66]

any one find any problem??

[Kodeblue]

I cannot download the new version on my Mygica. I'm inly getting some international channels.

[Kodeblue]

Anyone know why I might only get international channels?

[pj128123]

Help please!!
Is anyone have issues with emulator 8.7 in dreamlink T6? I'm able to get in to the menu but when I select a movie from videoclub keeps saying file missing and when I select a channel from tv give me only a black screen.

Thank you

[4ktvfan]

Using nfps, which VERSION of the stbemu do we download for Dreamlink T6 clone?
I tried clicking on "nfps arm7a" but it only has linux code and not android on the T6.
Thanks for any help.

[dog09]

I been with nfps for years I had issues pro emulator doesn't matter which version I use, but when I try other iptv services no issues with the pro emulator , lve come too concussion that it's the nfps service causing these problems sad state of affairs just like Donald trump

[4ktvfan]

Thanks for that, dog09. Ok, even for other vendors, what exact software/apk do I download to make the T6 work for iptv, please?There was no arm7 Android choice.

[tooti]

try changing media player below settings
ljk works good

[mvas]

v0.8.08
What's new:
* Updated Exo player to v2.0.2 and Ijk player to 0.6.2.2.
* Fixed portal loading if network cache is enabled. *
* Fixed support of audio tracks and subtitles. **
* Fixed Auto player's player selection.
* Fixed some other issues.

* Those who've disabled network cache: could you enable it again to see if it works now.
** Audio track/subtitle selection should work with Exo player. But because of a bug in Exo, sometimes you can see a track with a name "unknown". You may try to select this track, but in most cases the player just stops working after that. So you have to change a channel to make it work again.

Free version
armv7a:
https://mega.nz/#!AMZUSAIS!n8BsBJqFUUhkiWB0YmDsI9Ji59sZumjW9qYagiE 0pLs
x86:
https://mega.nz/#!NVY0WTwb!o2XZTKrhmcMYIn2J9GW4v6byMQHNR5U_ZlAA7Ne cu0E

NFPS
armv7a:
https://mega.nz/#!gBxxSKCa!gFPtfMHY5ETq4kh13mvDUUBUN5xjgT1rqV7KGPM GILs
x86:
https://mega.nz/#!0VwGXKRR!ZE5MXdboWw8UQDIK8xXFAO_QpKKoJMcxcQQNj7C hyvk

Rocket
armv7a:
https://mega.nz/#!MMRVlaoQ!W9N1w2bNsg66kZAYgAUxQmzLmyueh3DdqtsTaEY 0Tn4
x86:
https://mega.nz/#!EMA01RoL!oULRLZk3eYSRDo6kQjZlvBD0OnpJI4jXFShwWsK 2jHg

IPTV66
armv7a:
https://mega.nz/#!0cBXSJ4S!jtz9t-zJTrdKk-LkxEcIkdNhWSZMfYMKOluLNTN2K20
x86:
https://mega.nz/#!IYZngaiZ!08nwpqoAPOiYMEb5lVxmC3GpBIq8ivddSUFEUHP rFiQ

[smly]

I have had issues since updating to latest version of emulator I lose video on channels intermittently, no amount of resetting helps .I have kept the older version on another box and there are no issues on it. can i revert back to the older version on the other box too?

[joesimm]

I'm getting a Stalker user/pass login page. How do I bypass this ??

[psyco]

Hi there,

I'm having an issue with the stb emulator on a fire stick.

I set everything up using the latest version of the stb.apk for my iptv66 account.

I typed inn MAC address, Server address (iks66.tv), I changed the MAC address, I reset my route etc etc.

I keep getting the message "connection error" on a blue screen.

Any suggestion ?

[johnny22]

No audio on Android box

[jumper]

No audio on Android box

change media player to Ijk player. (Setting, Mediaplayer).

[number3]

I see there is an update on start up v0.8.08.03 is this available here?

[bawler]

I think the only way to get to v0.8.08.03 is to update inside of stb emulator right now. If you install version 8.08 it will automatically prompt to update to v......03.

[longodongo]

I think the only way to get to v0.8.08.03 is to update inside of stb emulator right now. If you install version 8.08 it will automatically prompt to update to v......03.
Is that even possible?? A friend's m8 box will received that message to update,when he tries,it just says it's updating,but never does.

[Bkman2020]

Could be a software bug.

[alps]

This new update v0.8.08.03 has lot of issues.
Takes a log time to login (the yellow bar not moving)
Black screen when you start emu.
Picture often freeze when you have logged
Suddenly everything stops and I have to reload the profile

[altroyjm]

Anyone know why I might only get international channels?
did you send device id to the network?.
I had that problem before but sending device id fix the problem.

If upgrading Stb Emulator app and you get a new device id you have to reset IPTV.

[altroyjm]

http://www70.zippyshare.com/v/SxX7UMCV/file.html

Download pro version no ads

[hitman1]

Hello: I did everything the instructions says in STB EMULATOR but it is asking for a USERNAME and PASSWORD and it will not allow me to type in the boxes??

[RAVIP]

Anyone using this emulator on the new firestick with the quad core? I installed but it alway seems to freeze in the live channels. The vod works perfect. Tried changing player but only one that works perfect is exo player which has no volume. Tried to install MX player but not compatible with the new firestick. Even tried to use in Kodi with Beast build with pvr client but freezes with live stations after turning a channel or two. Any suggestions?

[Danny5381]

Use ljk player, then go to settings, ljk settings then uncheck Use MediaCodec. Seems to be working the best right now for the stb emulator and live channels.

[leafs99]

I just loaded the apk and it's asking me for the login and password for authentication. Am I assuming that is the donation number for the login and password in papioa? I also used the following first three mac to start with 00:1A:78 and my last 6 octets for my devices mac..

Am I correct because I am gettting a login error. Using the arm version for rocket.

Thanks

[leafs99]

I finally got it going but some channels I can hear voice but no picture. Others are perfect. Any advice? Thanks

[leafs99]

I got the video going now but the picture is slow..CNN is perfect but many channels in the 300's are jittery/slow picture.

[Marley]

look if there saying this one has bugs which i dont know try a older one or stalker or wait for update and maybe someone to tell you the right info which i see they are doing

[laibo2]

Hello: I did everything the instructions says in STB EMULATOR but it is asking for a USERNAME and PASSWORD and it will not allow me to type in the boxes?? I had the same problem, but i solved it by using keyboard and mouse for the input. hope it help

[Specialist]

hold ok, and the setting bar have the magic work, KEYBOARD

[mvas]

This version is for testing purposes only. It has another application ID and can be installed with any other versions of the app on the same device.
This version won't receive any updates after v0.9 is released.

v0.9 beta
* Added Stalker's Smart Launcher support
* Added limited support of PVR
* Updated Ijk player to v0.7.5
* Reduced memory usage
* Fixed software remote control issues on some devices
* A lot of other bug fixes

PVR only works for channels with fixed bitrate (like TS), streams with adaptive bitrate (HLS, etc) are not supported yet. Also PVR for a channel should be enabled by IPTV provider (like on real MAGs).

Known issues:
If you import settings from previous versions of the app your authentication data (access token, etc) and most portal data won't be imported. This issue only affects the data that was saved by a portal, your profile's data won't be affected. So you'll need to enter you login/password again.

armv7a
https://mega.nz/#!kQR0RKzY!-A-G1uArlN16txnmnZB3s7gY5eMVifJuPYx-q1r_mUo
x86
https://mega.nz/#!IdZS2KIJ!oEXhYyvwSoER5GPpqaGZnoNKIziuKgsyQJ0KKM7 SJFk

[freshiem]

Good app. Crashes though as soon as you Try to change channels or go into guide.

[mvas]

Good app. Crashes though as soon as you Try to change channels or go into guide.

Fixed. I've updated links to apks.

[freshiem]

Working good now! Thanks

[asuarez]

I have a problem with this 0.8 version. I installed it, brand new user so I'm not entirely sure I'm doing this correctly but after linking the MAC and the route and all that jazz, the app runs but it won't even prompt me for the username and password. it just sits there.

[puki]

Working very well indeed!
Excellent job mvas!
If you can incorporate the username and password into the configuration instead of entering it everytime the mac is reset would make it complete.
Thanks for your excellent work!

[nd4307]

Mvas, should I download these new apk's? Seems like I'm having issues arrive recently.....emulator crashes when picking a channel, slow load of channels.

[leafs99]

I keep getting error when trying I try to connect after I input my username and password. Multiple iptv resets did nothing.. Was I supposed to change the url to the rocket url or leave it at default? Thanks

[big dady]

You must change the URL

[leafs99]

I've changed the url to either 11 or 22 and did an iptvreset but I'm still getting the red error message on the top right hand corner after I input the login and password which of course is the donation number. Its the rocket server that I am using. Any device? Thank u

[Marley]

sure your typing it right

[leafs99]

if i dont type it correctly, it will never ask me to input my login or password credentials. It will just go to black screen and no login screen. Therefore it is trying to connect but something is stopping it. I've done a clear data, reload portal and reset iptv and still the same. 1 question. Do you enable the PORTAL IS Internal option under portal settings tab or just leave it unchecked?

Thanks

[leafs99]

I went back to an older version and BINGO connected first time..Thanks

[hotwarmguy]

I tried beta version but only black screen. Bloomberg and RT channels are working which is free
with older version works fine but it is freezing today.

[hotwarmguy]

I tried beta version but only black screen. Bloomberg and RT channels are working which is free
with older version works fine but it is freezing today.

now I am trying 8.08 but it is giving me an error.
tried changing mac address but the same error.
Is it because I tried beta version with my rocket?
I guess the server is very slow because my other box is working but freezing.

[brada]

I have the same problem on my TV Box with v0.9 Beta... I get an error message "Your STB is blocked. Call the provider". But with the same version on my other TV Box from another manufacturer it works just fine. It's like the app is not covering the MAC address and the device can't register on the Stalker Portal. Is there I way for you to fix this? Thanks! So far you've been doing a great job!


https://s23.postimg.org/pvxk606ln/IMG_20161217_152956.jpg

[4ktvfan]

Does ***ANYBODY*** know how to get the Dreamlink T6 (probably clone) with 3.44 firmware to play nice with NFPS iptv? That is, to get it to work AT ALL?

Thank you if you answer.

[autostope]

I have Android Box RK 3229, I have the same problem. !!! I tried the Samsung phone S5 and Note 3 works OK

[brada]

The latest version solved the problem! Thanks a lot! Everything works great! :)))

[zoboloff]

Hello! portal mag.siptv.eu (smart iptv)
does not work?? Can not load panel and page! Do you have a trick or idea? thank you

[gizm0]

This emulator, latest version 9.0.6 or whatever it is at now, mine just auto updated. Is working absolutely fantastic / amazing.

Thank you so much to the developers and porters working on this. You made my Christmas / new year!

TY AGAIN!

[henrywin]

Hey guys, there is someone here who can tell me how get french channel on stb emulator. My version doesn't have any French or Italian.I see online other version with those channels. Do i need to download another version of STB emulator or there is a way i can change the channel list. Thanks,

[wag123]

On 9.0.3 installed on my M8S KitKat box I am unable to get the number keys or volume control keys working in the program, even after I defined/assigned them, the number keys only work in the settings. This is happening with all input devices including my bluetooth mini keyboard, the IR remote control, and even a hard-wired USB keyboard. The number and volume control keys work fine on this same stbemu version in my newer GT1 Marshmallow box with a second 66 subscription.

[Mont]

I must be doing something wrong. I tried to get the emulator, but every time I download it from Mega get an internet explore sign with stbemu-rocket-armv7-release-0.9.03.apk. It's not a apk file. If I check my downloads, I ask if I would like to open it. I click open and then a new download file pops up and ask if I want to open or save the file. If I click open, it repeats the same steps again. If I click save, nothing happens. It just goes back to open with a arrow next to it. I click the arrow and it than says to open with. I want to know if I should have a program that would open it? If so, what program do I need? When I check the folder it does say it's a apk file (10,989 KB). I hope I am on the right track, but just missing something simple. Any help would be appreciated.

[ilan]

That is an installer file for an Android system. If you're downloading with IE, it sounds like you're on a Windows machine, and it won't know how to handle an Android installer file.

If you want to use this file, get it on your Android device. If you're trying to install this on a Windows machine, you'll need to download a Windows installer file.

APK = Android Package Kit

[Mont]

That is an installer file for an Android system. If you're downloading with IE, it sounds like you're on a Windows machine, and it won't know how to handle an Android installer file.

If you want to use this file, get it on your Android device. If you're trying to install this on a Windows machine, you'll need to download a Windows installer file.

APK = Android Package Kit


Thanks for the reply. I understand what your saying, but how do I get the file on a usb drive to add it to my android box? Or are you saying once I put it on a usb drive and I look at it on my android box, it will be converted to an apk file?

[expatter]

Thanks for the reply. I understand what your saying, but how do I get the file on a usb drive to add it to my android box? Or are you saying once I put it on a usb drive and I look at it on my android box, it will be converted to an apk file?

No, it won't be converted to apk as it already is an apk file. Simply copy that file to a usb drive and put the usb drive into your android box. From your android box, just open a file explorer and browse to the usb drive, click on the file and select 'install' and that's it. Once it's installed you will have to click on the 3 dots in the upper right hand corner and input your credentials in order to access the server.

[zoboloff]

Hello, I have a big problem with the video format! When I go on the menu aspect ratio, I am forced to put internal drive and format fit Horizontal to have a good dimension, but the problem is that it does not memorize the action when I change channel. ! So how memorized my format aspect ratio?

[josemald]

hello to all I just purchased the Shield and want to install STB Pro for my iptv account, I can get the menu to show does anyone here know hot to properly install STB pro and get it working on the shield? help would be greatly appreciated, thank you

[Redsteppa]

Hi, quick question, does this STBEMU app work on Roku Players? Sorry if this question is in the wrong forum.

[crazy carl]

Hi, quick question, does this STBEMU app work on Roku Players? Sorry if this question is in the wrong forum.

There is a channel for it currently but it doesn't work very well from what I have read..the channel code is exactly ehat you have in your post good luck 🍀

[Bobpopovich]

Fixed. I've updated links to apks.

Hello, I have couple of boxes and the nfps service with Stb emu on the Nexbox a95 x is getting stuck, the guide freezes , the remote does not work, several issues. Is there a new fix for this ?

Please let me know.

[magdiel]

Hello.I have an H96Max Plus 64 bit 4gbRam.When I try to download STB EMU from play store It says app not optimized for this device.I can install it ,but it won't work.Is there another app I can Use for NFPS That is not Kodi?