Stalker disabling itself

[slick6732]

Running jarvis 16, Stalker client nfps, stalker epg updater on firestick. All was fine until yesterday, now I am getting could not load and no pvr add on enabled. I have cleared data uninstalled stalker and reinstalled, pull power several times. When it says no pvr enabled, I go back in and enable stalker, after enabling it, it will dissapear out of my add ons list. Have also saw a can not load dll error once or twice. At this point I am lost, it worked great and now it is acting crazy. Any help or nudges in the right direction would be greatly appreciated. Thanks

[larrym4009]

How did you fix the DLL error, I have the same issues

[dara]

If you are getting the dll error on install, that means your device has some sort of permissions issue and can't move the files from the .zip to the right location, or a memory issue. If you look in **********, and the pvr.stalker.nfps folder, you will find a couple of Kodi installs that already include the addon.

As to the OP, I think the issue is related to the permissions issue, but more likely, low memory. Firesticks are relatively cheap, so they don't give you much 'room' to run Kodi. I know some will swear by them, but its kind of like running a golf cart on city streets, you can do it, but don't be surprised that you can't go over 25 MPH..

[slick6732]

How did you fix the DLL error, I have the same issues

I believe ********** has a new stalker build that fixes that issue.

[slick6732]

If you are getting the dll error on install, that means your device has some sort of permissions issue and can't move the files from the .zip to the right location, or a memory issue. If you look in **********, and the pvr.stalker.nfps folder, you will find a couple of Kodi installs that already include the addon.

As to the OP, I think the issue is related to the permissions issue, but more likely, low memory. Firesticks are relatively cheap, so they don't give you much 'room' to run Kodi. I know some will swear by them, but its kind of like running a golf cart on city streets, you can do it, but don't be surprised that you can't go over 25 MPH..

Thanks dara, I am sure you are 100% correct on the memory issue. it got to the point where I could not connect to abdfire to side load anything. Did a factory reset on firestick, going to start from scratch.

[infectedtrut]

I believe ********** has a new stalker build that fixes that issue.

I run the new apk to fix that Dll error but doesn't work. I am running clean install of kodi 16 on fire tv ( not stick) . But for some reason , the PVR stalker that comes with kodi 16 works . lol

[slick6732]

If you are getting the dll error on install, that means your device has some sort of permissions issue and can't move the files from the .zip to the right location, or a memory issue. If you look in **********, and the pvr.stalker.nfps folder, you will find a couple of Kodi installs that already include the addon.

As to the OP, I think the issue is related to the permissions issue, but more likely, low memory. Firesticks are relatively cheap, so they don't give you much 'room' to run Kodi. I know some will swear by them, but its kind of like running a golf cart on city streets, you can do it, but don't be surprised that you can't go over 25 MPH..

I have come to the conclusion that it is not totally a memory issue. It worked great for a few weeks, then this issue arose. I factory reset stick and started from scratch, when I enable tv I get a no pvr enabled error, even when stalker nfps is enabled. After getting the error I go into addons and stalker nfps and stalker is disabled or missing entirely, If I back out of the entire system menu and return stalker nfps is there again and disabled. Thinking it is some kind of permission issue now. If anyone else has had this problem and found a solution, please chime in and save what I have left of my sanity!

[CanesFan4LIf]

I am having the same issue (pvr won't load and disables) on my Android G box. I saw on the epg ninja site a fix (apk), but it won't install on my box. not sure what to do at this point.

[slick6732]

I am having the same issue (pvr won't load and disables) on my Android G box. I saw on the epg ninja site a fix (apk), but it won't install on my box. not sure what to do at this point.

I can not seem to get it loaded either, I have installed as an apk and tried pushing to sd with no success. I have went as far as doing a factory reset, reinstalled kodi and still having same issue of it disabling. I did however for the sake of science, buy another firestick and set it up the same way and it worked! So i'm baffled to what is actually causing this issue, I am going to continue to try and get it to work on the non working stick. If I do find a workaround I will post it.

[elm417]

PLEASE let me know if you figure this out. I've been at it for 3 days now, and have not been able to load the dll fix.

[mania03]

same issue as you, getting the "cant load DLL error" all of a sudden. nothing was changed on my end, it was working fine all this time until 2 days ago.

using..
Kodi RC3
Amazon Firetv Stick
stalker client nfps 1.03

[slick6732]

same issue as you, getting the "cant load DLL error" all of a sudden. nothing was changed on my end, it was working fine all this time until 2 days ago.

using..
Kodi RC3
Amazon Firetv Stick
stalker client nfps 1.03

Looks like they all went out at about the same time, with nothing being changed.

[elm417]

yall figure this shit out yet??

[larrym4009]

I am having the same problem. I am using the AFT box not the stick, have been using the same set up for 4 months without a problem until a few days ago. Unable to use any PVR, the only thing that I can think of that has changed is I have Amazon Prime on my box and they installed the new Alexa App, since they added that I have not been able to access my stalker channels......any thoughts????

[slick6732]

I am at a loss with the one stick, it is still disabling stalker nfps as soon as I enable tv. The second stick I just bought is the exact same setup and works perfect. On the old stick, just quit working, no setting changed. Just woke up one morning with a searching for pvr client at the top of screen, followed by a no pvr client error and stalker nfps disabling itself everytime I enable tv. I have went as far as uninstalling kodi and resetting stick back to factory setting and doing a complete new install of kodi, stalker nfps and epg ninja with the same problem afterwards. My only thought is that there could of been some kind of update on the now non working stick to cause this issue, because the new stick works fine, well for now until it possibly gets hit by the same update or whatever changed to cause the problem, Whatever the software change was, it is not effected or erased by a factory reset. If by chance someone finds the issue, please share. I would love to know what the culprit is.

Jarvis 16
Stalker nfps
Epg ninja
Iks66

[fuzzywuzzy1]

I had a similar issue with stalker disapearing and PVR not enabled. I fixed it by running Start Fresh. Not the best choice as it deleted all my Add On's and Sources. Had to rebuild Kodi 16. But now I can view TV Guide again using NFPS Stalker and EPG Ninja.

[slick6732]

Update: Today when I got home from work, kodi was no longer running and I had a whats new window in the left side of my home page. I had to click (GOT IT) button to get it to go away, like the idiot that I am. I did not read what was new, but whatever it is is what is causing our issue, because now I am having this issue on the new stick and I remember now clicking the (got it) button on my other one right before it quit working. Long story short, it is a firestick software issue. If anyone sees this whats new window, please take the time to read it and let me know what it says so I can track it down and kill it..
When I go to manage apps and start Kodi, there is a pop up that says (Filtering installed apps). It was not there before and is the root of all evil..

[mania03]

You can use the built in stalker client instead of the stalker client nfps. Thats what i did cause I couldn't get the nfps stalker client to work.