Url portals that work.

[Bkman2020]

Before proceeding to troubleshoot make sure your url is correct below:
11.iptvprivateserver.tv
11.iptvrocket.tv
66.IPTV66.tv

[lobsterpot]

Well , now I know why what I had working ain't working now. Hum, somebody changed the url .

[rmartes]

Bkman2020 -- "Die Hard Giants Fan as well" --- Currently, channels are not loading at all on my MAG254 with the listed portal URL. It is definitely not working and this just happened within the last 30 minutes.

[Bkman2020]

Its working here reboot device try agian.

[Bkman2020]

Service down agian thats why do not adjust anything.

[babyleafgirl]

Is it my imagination or is the server going down every day since they added the password? This is getting very frustrating.

[Bkman2020]

Site is coming along thanks guys.

[vitorG]

my box just loaded up. Working now

[crazed 9.6]

it is working with the http prefex today.

Mag will connect. You just need to mess with it a little bit.
When you get to the progress bar loading , but does not load, just sits there and spins ... at this time use the GEAR button on your remote (the Setup button just below the Blue button). This will take you to the inner portal System Settings.
Then enter the Server menu option, then Portals and remove the http prefex
so it looks like this ...

11.iptvrocket.tv
Use the KB button for KeyBoard.
Then exit with the save function , the OK function.
Then back to System settings menu and Reboot Device. It should reboot back to that progress bar and trying to load but it prolly will not load.
Now go back in GEAR menu again and do everything the same but this time add back that http prefex.
so it looks like this...

http://11.iptvrocket.tv
-Do not forget to Reboot Device again.
This time it should connect, this one did.


iptvrocket was example server

[rmartes]

it is working with the http prefex today.

Mag will connect. You just need to mess with it a little bit.
When you get to the progress bar loading , but does not load, just sits there and spins ... at this time use the GEAR button on your remote (the Setup button just below the Blue button). This will take you to the inner portal System Settings.
Then enter the Server menu option, then Portals and remove the http prefex
so it looks like this ...

11.iptvrocket.tv
Use the KB button for KeyBoard.
Then exit with the save function , the OK function.
Then back to System settings menu and Reboot Device. It should reboot back to that progress bar and trying to load but it prolly will not load.
Now go back in GEAR menu again and do everything the same but this time add back that http prefex.
so it looks like this...

http://11.iptvrocket.tv
-Do not forget to Reboot Device again.
This time it should connect, this one did.


iptvrocket was example server


My is currently working without the http:// -- actually it doesn't like when I put the http prefix on my MAG254. Pretty much all my channels are now working including VOD. Just hope this is finally put to rest -- it has been very frustrating and I will not pass along service yet to families and friends until I see it is stable. Just wish I didn't purchase that much. I am hoping I don't get stuck with this, because the service is so inconsistent.

[lobsterpot]

it is working with the http prefex today.

Mag will connect. You just need to mess with it a little bit.
When you get to the progress bar loading , but does not load, just sits there and spins ... at this time use the GEAR button on your remote (the Setup button just below the Blue button). This will take you to the inner portal System Settings.
Then enter the Server menu option, then Portals and remove the http prefex
so it looks like this ...

11.iptvrocket.tv
Use the KB button for KeyBoard.
Then exit with the save function , the OK function.
Then back to System settings menu and Reboot Device. It should reboot back to that progress bar and trying to load but it prolly will not load.
Now go back in GEAR menu again and do everything the same but this time add back that http prefex.
so it looks like this...

http://11.iptvrocket.tv
-Do not forget to Reboot Device again.
This time it should connect, this one did.


iptvrocket was example server

So, your saying to change the url again to gain access to the server? Well I guess it's time to change to something that works.

[babyleafgirl]

Have to say I am really getting tired of this service being down. I do believe I am wits lobsterpot time to find another.

[Pookdog]

Are they gonna fix this problem soon never can get anyone of them to reply to an emails maybe they need to put the system back the way it was service was great then

[AeonFlux]

I have tried Crazed 2.0 change url. I edited out the http:// and rebooted. Then I put the http:// back in it and rebooted. That not worked. All I get is blue barber pole. I really think this username password thing was too complicated. In the new software, they should have made a spot for the user to enter his info. Then the server could use it or not until they got it all running. This sure doesn't work. I just forked out a renewal last month for all this to not work.

[chad1976]

Sum iptv worin sun not

[casper]

Sum iptv worin sun not

I was not aware of the new urls, I tried all but the one that its working for me is 66. the only problem I see it has a connection message but it works.
I am using a mag254, so guys change it to that url and reload the portal. only no need to reload the device.

[Snowgoose]

My is currently working without the http:// -- actually it doesn't like when I put the http prefix on my MAG254. Pretty much all my channels are now working including VOD. Just hope this is finally put to rest -- it has been very frustrating and I will not pass along service yet to families and friends until I see it is stable. Just wish I didn't purchase that much. I am hoping I don't get stuck with this, because the service is so inconsistent.

At least yours is working, I subscribed to rocket yesterday, and after 2 hours of authentication problems, I finally had very slow and jerky access for about 20 minutes then nothing, just the blue progress bar ever since. This service is rubbish, paid 105 dollars for nothing. If I load the portal address of my old supplier, works fine so not my MAG box or connection. Rocket is a con, don't buy it..

[alfawolf]

Mine works with adding the ( / ) after rocket.tv/ for mag. Still slow loading channels back and forth but up and running.

[wineonnine]

I've tried all, the one working for me is - 11.iptvprivateserver.tv I boot it 2 times , let it sit 3-7 min running on blue bar got tv
I reboot 2times every time I turn my box on. I don't leave my box on. if I don't reboot 2 times it freeze up. both of my boxes are that way.
this might help someone else. my grandson leaves his on day and night no problems most of the time wine

[Bobby boy]

not sure if i allowedto do this but in my server i have server name iptv66 server url says servertv-iptv.xyz is this wrong and could this be causing my problems

[splodge76]

Mine is connecting now {mag254} but connection problem at top of picture.

[grogan]

Mine is connecting now {mag254} but connection problem at top of picture.

same here also mag254

[Kimbo]

http://iptvtalk.net/showthread.php?14257-NFPS-Announcement-about-IPTV-Down-status-16-feb-2016

[wickedjoker]

I would like your post if I could Laser.... I am glad Tinie finally said something about what is going on and I hope they get it taken care which I am sure they will its just going to take time...

[Autoroam]

http://iptvtalk.net/showthread.php?14257-NFPS-Announcement-about-IPTV-Down-status-16-feb-2016

Good....sometimes people just need to know theyre not being ignored. I commend the chief for running this announcement...I have no doubt he and his team will deliver....just dont let it drag on foreva mate...hehehe.

[beattie]

better than yesterday, at least channel list is loading, with no tv - yet... 'Connection problem' banner appearing at top of screen. Some progress

[p0071234]

need help on how to change the boot up between different portals from different providers at start up. Thanks.

[Sledge]

Avov Fuse URL 66.iptv66.tv has the red stop button on it, then says "Your box is blocked by server. Please contact service provider."
I paid in full for my donation weeks ago Feb. 2nd I believe, never had connection since the change over.
Where does the problem lay? What changes do I need to make to have the blocked by server message removed?
Thank you in advance for any help that you may be in this situation.

[sun47me]

Tried 3x to reboot device. Now watching TV. Connection problem pop up top of the screen once and disappeared. Still watching TV

[Bkman2020]

Tried 3x to reboot device. Now watching TV. Connection problem pop up top of the screen once and disappeared. Still watching TV

If you read announcements service is broken till futher notice.

[houseman]

Not for my friends, Same thing they said they changed the do# and Reset Same Not loading blue with 1/4 yellow

[Android Man]

Unplug your box for a few minutes and try again.