Unable to load channels....ready to throw in the towel.

[Gtest413]

Can't load channels now coming up. Reset And changed Mac. Nothing works. Now not able to change info on Papaio site. Running 15.2. 2 weeks now I've been battling this. I'm almost ready to just throw in the towel and get cable.

[Gtest413]

Yeah... this is too much already. For a paid service, this is not good. Rocket works, but not NFPS for me right now.

Are you getting the same message? Unable to load channels

[dinkish]

On and off. I did the IPTV Reset and it seemed to unmess it up. Don't know what to do to get the EPG back, it was fine this morning, displays the 1st channel without any epg description, lists no other channels.

Try the IPTV Reset (without changing the MAC first). I started getting Too many MAC\Resets in 1 day error, despite not having done more than 2 MAC addresses and 1 reset, so... whatever. Try it I guess.

[chad1976]

Me too .But the yellow bar load 1/4 only.Did a factroy reset 2 times.Reset my router.I have been down from feb 1 .There has to be a FIX for this.Please tell me how thx

[crazed 9.6]

feb 1 was the day it started.
that was the day that this service started the secruity

[Gtest413]

I havnt come by a new exact guide. I keep getting go look "here" and the post is from oct. 2015. Which means it's not even relevant.
I'm running 15.2. PVR 0.8.4. Put in Mac. 11.iptvprivateserver.tv -donation number x2. got the url papaio with donation and Mac in it. Then the random 12. Random 5. Random5. Then random 12.
Anyone see where it's wrong? Or is there Another step now.

UPDATE****
Redid all my settings. New Mac. Reinserted all information on pvr.
UNABLE TO LOAD CHANNELS.

[calimansi]

I havnt come by a new exact guide. I keep getting go look "here" and the post is from oct. 2015. Which means it's not even relevant.
I'm running 15.2. PVR 0.8.4. Put in Mac. 11.iptvprivateserver.tv -donation number x2. got the url papaio with donation and Mac in it. Then the random 12. Random 5. Random5. Then random 12.
Anyone see where it's wrong? Or is there Another step now.

UPDATE****
Redid all my settings. New Mac. Reinserted all information on pvr.
UNABLE TO LOAD CHANNELS.

There is so much misinformation floating around on these forums, it's insane. It's not the mods fault... it's just too much.

I'm still getting unable to load channels.

I'm going to try out tvonip service. It is a little more expensive, but I read that more channels should be HD.

[crazed 9.6]

misinformation ?
huh ?

There is old information and there is new information and lots of it. There is no misinformation.
And please do not advertise other services here at iptvTalk
Thnx

[jony604]

we all get frustrated when things don't work there is a reason for things don't work It is called wrong info that your divice reads so look to correct that. The other day i helped a friend and the man that introduce me to this to get kodi to work so I tried his code info on my laptop
yes i got it to work effortless he could not no way it was a bad laptop he said , then i re inter my info mine would not work two days latter i seen that i had left an extra set of #'s in the mac you know how many times i looked at that #
as for his it was a mater of turning every thing off or enable disable enable. Good luck

[Lance989]

I haven't had any issues. Has everyone here pointed to google dns? I've been watching all day.

[Gtest413]

we all get frustrated when things don't work there is a reason for things don't work It is called wrong info that your divice reads so look to correct that. The other day i helped a friend and the man that introduce me to this to get kodi to work so I tried his code info on my laptop
yes i got it to work effortless he could not no way it was a bad laptop he said , then i re inter my info mine would not work two days latter i seen that i had left an extra set of #'s in the mac you know how many times i looked at that #
as for his it was a mater of turning every thing off or enable disable enable. Good luck

I have done everything you mentioned. I redid literally everything. I'm not getting auth. Fail, my god damn channels won't load. I'm going to check oUt that other iptv.

[steemer]

Installed Jarvis RC3 and used Stalker client NFPS, everything working again. Is the simplest set-up of all.

[steemer]

Forgot to mention, I deleted the stalker NFPS version that came with Jarvis(was causing problems). Re-loaded version from Ninja (make sure you use version J).

[Roach46]

Installed Jarvis RC3 and used Stalker client NFPS, everything working again. Is the simplest set-up of all.

This^^^^^^^^^^^^

[Gtest413]

This^^^^^^^^^^^^

Wish I could. Have Linux on Mach 10 box. Can't get 16 yet

[sat-junkie]

Installed Jarvis RC3 and used Stalker client NFPS, everything working again. Is the simplest set-up of all.listen to this guy he is exactly right

[steemer]

Wish I could. Have Linux on Mach 10 box. Can't get 16 yet

Sorry to hear that, hang in there. Not sure if Stalker NFPS ver. 1.03 works with 15.2/could try it though. If it does, make sure to disable all other Stalker versions.

[Gtest413]

Sorry to hear that, hang in there. Not sure if Stalker NFPS ver. 1.03 works with 15.2/could try it though. If it does, make sure to disable all other Stalker versions.

I figured out A way to get files right over to my box. Which download should I use for 15.2 using Linux?

[steemer]

I'm using a MyGica Android box/Arm version, not sure which version to use for Linux box. Epg Ninja site does have all the different versions of Stalker NFPS 1.03 . All i know is you need a version that ends w/letter "i" for Insegard (Kodi ver 15.2) "J" is for Jarvis (Kodi ver 16).

[Gtest413]

I'm using a MyGica Android box/Arm version, not sure which version to use for Linux box. Epg Ninja site does have all the different versions of Stalker NFPS 1.03 . All i know is you need a version that ends w/letter "i" for Insegard (Kodi ver 15.2) "J" is for Jarvis (Kodi ver 16).

Ya I tried one, but for some reason it was the old version.

[Forestgm]

Getting cant load channels error now . I no my set up is good as I have being running for weeks without issue.

Stalker client 0.8.4 on kodi 15.2

[georgec]

Getting cant load channels error now . I no my set up is good as I have being running for weeks without issue.

Stalker client 0.8.4 on kodi 15.2

Same here.

Getting bored of it now, might have to go old school & read a book for entertainment soon!

[georgec]

Channels back up here now, just no guide

[cellbot414]

I Have three android boxes in my house that I purchased three donations for. The boxes will work fine for a day and then they will all get an "Authorization failed message and the Pvr wont load the channels. I'm using the spinz tv build with stalker client nfps. All other Pvr clients are disabled except the stalker client NFPS. I cant figure out why my boxes stop working.

[Forestgm]

Channels back up here now, just no guide

Back here also. Hopefully for good :confused: I'm using prefer XMLTV for guide was using XMLTV only but that comes in with a blank guide

[Supreme]

Can't load channels now coming up. Reset And changed Mac. Nothing works. Now not able to change info on Papaio site. Running 15.2. 2 weeks now I've been battling this. I'm almost ready to just throw in the towel and get cable.

Hey everyone this has been a diaster from the beginning. Here is my truth, "papiao/iks said that stalker would no longer work unless IPTV Stalker adapted the neccessary security".
Well they did a while ago and it has been working flawlessly with the Stalker 9.0.21 version. No need to change MACs or any of that craziness. It should have never come to this. Make Sure The New Idea Works Before You Shut Down The Old. I understand the leeching server issues and problems but you guys put the cart before the horse and once that GREAT Reputatuion you had dies on the net, you will be hard pressed to get your following back. Good luck I am waiting for you to correct the problems.
But in the mean time as a paid consumer and a reseller I am still using what has been the SMARTEST Security Solution thats to Mark at Stalker. Stalker 9.0.21 version with security

[Forestgm]

I Have three android boxes in my house that I purchased three donations for. The boxes will work fine for a day and then they will all get an "Authorization failed message and the Pvr wont load the channels. I'm using the spinz tv build with stalker client nfps. All other Pvr clients are disabled except the stalker client NFPS. I cant figure out why my boxes stop working.

Don't like using skins other than confluence don't see point in them. Ok they look better but under the hud it's the same thing

[georgec]

Back here also. Hopefully for good :confused: I'm using prefer XMLTV for guide was using XMLTV only but that comes in with a blank guide

Yeh right, that's gonna happen,just put settings in & it works for good!
You wish!

They've got probs with XMLTV guide, see other thread.

[Autoroam]

Getting cant load channels error now . I no my set up is good as I have being running for weeks without issue.

Stalker client 0.8.4 on kodi 15.2

I am in the same boat as you.

Please tell me, prior to getting your channels to load did you perform anmy special rituals…..disable stalker….disable TV….erase data twice in TV….clear cache, restart….blah blah blah…..all the usual drama?

[georgec]

I am in the same boat as you.

Please tell me, prior to getting your channels to load did you perform anmy special rituals…..disable stalker….disable TV….erase data twice in TV….clear cache, restart….blah blah blah…..all the usual drama?
Disabled TV, cleared data & guide data, restart & clicked heels together & turned around anti clockwise three times here!

[Autoroam]

Back here also. Hopefully for good :confused: I'm using prefer XMLTV for guide was using XMLTV only but that comes in with a blank guide

My channels loaded…program loads too.

No.1 thing Ive learned from these outages is, if your system is working fine for months and then goes down don't change MACS and settings…as the problem is usually at the other end.

Alls well again….cheers lads.

[Forestgm]

I am in the same boat as you.

Please tell me, prior to getting your channels to load did you perform anmy special rituals…..disable stalker….disable TV….erase data twice in TV….clear cache, restart….blah blah blah…..all the usual drama?

All of the above. Put I never changed my mac ever or reset IPTV. I no my set up is good. So today just sat it out and waited for it to come back by disable / enable

[georgec]

No.1 thing Ive learned from these outages is, if your system is working fine for months and then goes down don't change MACS and settings…as the problem is usually at the other end.


True words.

[Roach46]

Same here, i never change anything, when you have it configured it correctly, and its running for a long time, it just does not un configure itself, while your sleeping

[big dady]

No.1 thing Ive learned from these outages is, if your system is working fine for months and then goes down don't change MACS and settings…as the problem is usually at the other end.

Alls well again….cheers lads.
So true but some people can't survive if the TV stop working :)

[tonster]

Had same problem this morning on Kodi 15.2 with stalker client 0.8.4. Disabled TV, cleared cache twice in tv, cleared cache twice in guide, exited kodi, went to settings on android, APPS, kodi, cleared cache. Restarted kodi, system, settings, TV, enable and viola, problem solved. It took about 2 minutes to fix.

[stuygang]

I accidentally uninstalled stalker how do I reinstall it.

[tallman]

running smooth all day for me

[Forestgm]

I accidentally uninstalled stalker how do I reinstall it.

That will require a fresh install of KODI or download stalker client NFPS from **********

[stuygang]

Thank you for your help

[bryansuavo]

Anyone having issues with the donation checker? I put in all my information and it says its invalid..

[cellbot414]

Mines says the same thing. This service is a freakin headache. Why cant they just create an app where the user signs in with a user name and password. All this mac address changes and resets and outages is some bullSh!t. Then its impossible to get in contact with someone when there is a service issue or order problem.

[periko_69]

Same her no service on all 3 of my donations, this is like the 3rd or 4th time this week. Wayda go! with all this new stuff that supposed to be stable. We were better off with the other settings.

[periko_69]

CRAP service does not ever allow to update mac's.

[nosnformeo7]

I am soooooo tired with this iptv this everytime there is a gropup installitation only a few ccucceded I dont thow maonye like i am not of it..we can get own on one had this then matter..did you not support customer service?.. I showing the probram on my so I would like to watch tv on my ID i have read everyyyyyyyything no ck..there needs to be changes..if need be we can facilita an onli view
SUCKS!!!!!!!!!!!
whenre u can talk control ofky mcomputer. T insecurible of the channerls and your supports is stoping streadily.!!

[waqarkhan197]

The problem is....they give permission to RESELLERS to sell donations in bulk, but when this kind of problem happens, NO RESELLER bother to reply to tons of emails (asking for ORDER #, so wqe can RESET the MAC).

Last 10 days, no matter how many times to put in Donation info and CONNECT, it pops up again and again. and never CONNECTS... last 3 days, now LOCK and KEY is coming up, and TV ONLINE even doesn't LOAD at all.

Very disappointed in the last 3 years now.

As They know, thousands of people effected; rather take this ORDER# thing off from the site; so everyone can RESET MAC and Enjoy for years to come.

I hope I am not being rude, but this a fact

MODS please look I into this

Thanks

[psycon]

the problem is, as far as this forum is concerned you should have bought your donation direct, not from a reseller... if your reseller is flaky, that is not the fault of the server.... you need to take it up with the reseller..

now the fact that they sell reseller accounts is irrelevant. not all resellers suck, some take very good care of their customers i'm sure.. still doesnt change the fact that if you didnt buy direct we are not really here to help you..

think of it this way, you dont buy a ford from a used lot, then try to bring it back to the actual ford dealer when you want to complain about it..

[Gtest413]

the problem is, as far as this forum is concerned you should have bought your donation direct, not from a reseller... if your reseller is flaky, that is not the fault of the server.... you need to take it up with the reseller..

now the fact that they sell reseller accounts is irrelevant. not all resellers suck, some take very good care of their customers i'm sure.. still doesnt change the fact that if you didnt buy direct we are not really here to help you..

think of it this way, you dont buy a ford from a used lot, then try to bring it back to the actual ford dealer when you want to complain about it..
Roastedddddd.

[Autoroam]

I think many people over reacted when the problem appeared….they changed their MACS multiple times, thoroughly messing things up when there was nothing wrong with their setup.

I learned a long time ago….when something fails don't change a damn thing…just visit this forum and you'll know whether it's an isolated problem or a widespread one.

If the latter, just sit tight. If the former, take advice from the many helpful people and solve it.

This service is great when it works….we have to do all we can not to mess it up due to our own mistakes.