How-To: Set up pvr.stalker.nfps with **********

[psycon]

This addon is no longer supporrted. Use of the epg.updater addon will auto configure Kodi's Built in pvr.stalker addon

[psycon]

Reserved...

[dara]

Look for the link under TV Guide for Kodi...

[TVFan]

Thanks Dara. The link to the new file is difficult to see (at least to my eyes), but I went back to check and saw it, then deleted my post while you were posting yours.

[psycon]

update. set connection timout to 120 to get back on

[tekkie]

Followed the directions here and on FTA* and no amount of uninstall/reinstall/etc gets my PVR working with my Amazon FireTV's. I may have to resort (unfortunately) to my Mag 254's just so the wife has something to watch while I'm at work. A shame because the XBMC on the FTV is SO much nicer than the chincy Mag 254's. :(

[loschg]

What is the Deference of the Files I and J?

Gary

[Blackbear199]

Isengard
Jarvis

[loschg]

Thanks

Gary

[GlammaGeek]

CHEEESE AND RICE... I have 2 AFTV's running Jarvis 16.0 (RC1). Sunday everything worked. I didn't have time to watch TV yesterday. With 3 hours of sleep, I was rudely awakened this morning by customer calls of complaint that their Live TV "wasn't working." I tested my two devices and couldn't get Live TV no matter what.

Finally got it to work by downloading pvr.stalker.nfps 1.03, changing the beginning of MAC address in papiao from 00:1A:79 to 00:1A:78. Also changed the last 3 numbers. Disabled Live TV then I cleared data and Guide (including custom TV groups sniff...sniff..waaaaa:(). Immediately got an error. Pulled power from AFTV, rebooted and VOILA!!!!!

I still gotta deal with customers, but at least I now know how to fix the problem!!! YAY!!

[littlepr]

Dara or Psycon,

Is version 1.0.3 now required or does 0.8.4 still work? I haven't been able to load channels even after relinking MAC.

[batch]

same here i cannot get it to work today after relinking mac

[GlammaGeek]

I haven't tried with 0.8.4, but see if turning off live TV then rebooting your device helps. I had one device that threw errors then sat trying to load for ten minutes before it actually loaded.

[Marley]

so true same for me each box is diffrent times

[littlepr]

Guys, there must have been some issues going on with the servers. It's working again with 0.8.4 but with timeout set to 120. I used to have it set to 15 and it would connect with no issues.

[dara]

Guys, there must have been some issues going on with the servers. It's working again with 0.8.4 but with timeout set to 120. I used to have it set to 15 and it would connect with no issues.

Please read the announcements...top of the list on the main page.

[tekkie]

CHEEESE AND RICE... I have 2 AFTV's running Jarvis 16.0 (RC1). Sunday everything worked. I didn't have time to watch TV yesterday. With 3 hours of sleep, I was rudely awakened this morning by customer calls of complaint that their Live TV "wasn't working." I tested my two devices and couldn't get Live TV no matter what.

Finally got it to work by downloading pvr.stalker.nfps 1.03, changing the beginning of MAC address in papiao from 00:1A:79 to 00:1A:78. Also changed the last 3 numbers. Disabled Live TV then I cleared data and Guide (including custom TV groups sniff...sniff..waaaaa:(). Immediately got an error. Pulled power from AFTV, rebooted and VOILA!!!!!

I still gotta deal with customers, but at least I now know how to fix the problem!!! YAY!!

Thank you for the reassurance. I will give the FireTV's in the house another chance to redeem themselves. I ABHOR the Mag 254's. Sure, they're functional, but they're FAR from pretty.

[loschg]

Well After all of these changes going on I moved from the Stock pvr.stalker to The Ninja 0.8.4

Got everything working But the Time zone again. With the Old I was able to pointing it to the Right
Database.

Changing the Time zone did not help Still one hour Behind..

Also in the settings xml there is a Line setting id="xmltv_file" value="1" Again This did not work.

Just a Note I am in Chicago and Using the Amazon Fire TV

Any One got this Working For CST

Gary

[psycon]

the nfps version compensates for DST automatically.. first i have heard of it not working since its release months and months ago.... clear your database and restart kodi.. follow all the steps in the guide verbatim.

[psycon]

Thank you for the reassurance. I will give the FireTV's in the house another chance to redeem themselves. I ABHOR the Mag 254's. Sure, they're functional, but they're FAR from pretty.

my main driver is a Fire TV.. works like a dream

[loschg]

Yes I did all that still one hour behind :(

[pendlet]

Receiving this error when trying to change mac on the papiao.is site. Is there an issue?

A PHP Error was encountered

Severity: Warning


Message: mysql_connect(): Access denied for user 'updater'@'10.1.1.102' (using password: YES)

Filename: models/donation_model.php

Line Number: 1846

[ljhookem14]

psycon, I have been using 1.0.1 StalkerClientNFPS but should I update to the 1.0.3?

[SSHAKER]

When I try to uninstall Stalker Client NFPS 0.8.4 and install 1.0.3 (running Isengard on a MINIX android box, I believe I want pvr.stalker.nfps-android-arm-i.zip?), it appears to install fine, but when I check, it shows up as version 0.8.4 again - any ideas how to fix this?

[loschg]

I have 1.03 Running on serval Amazon Fire TV Systems But it will not run with the Amazon Fire 4k The New System it gives a Dll Error .

It Will not also run with Kodi 16.2 same Problem and the 16.2 Fix will not even install.

Gary

[tekkie]

I have 1.03 Running on serval Amazon Fire TV Systems But it will not run with the Amazon Fire 4k The New System it gives a Dll Error .

It Will not also run with Kodi 16.2 same Problem and the 16.2 Fix will not even install.

Gary

Same problem here.

[aCiDjEsUs]

Well After all of these changes going on I moved from the Stock pvr.stalker to The Ninja 0.8.4

Got everything working But the Time zone again. With the Old I was able to pointing it to the Right
Database.

Changing the Time zone did not help Still one hour Behind..

Also in the settings xml there is a Line setting id="xmltv_file" value="1" Again This did not work.

Just a Note I am in Chicago and Using the Amazon Fire TV

Any One got this Working For CST

Gary

I just noticed that after the maintenance my EPG is also off by an hour, didn't change anything in the settings. Maybe it's something on their end. I got the same setup as you AFTV and I'm in the same city, before the maintenance everything was working fine. I'll give it few hours and see. Also in pvr stalker client I got my settings set to prefer XMLTV.

[ljhookem14]

I have 1.03 Running on serval Amazon Fire TV Systems But it will not run with the Amazon Fire 4k The New System it gives a Dll Error .

It Will not also run with Kodi 16.2 same Problem and the 16.2 Fix will not even install.

Gary

Interesting as my StalkerClientNFPS1.0.1 works fine in KODI 16RC2. I think I will keep it and not upgrade to 1.0.3

I've found that ScNFPS 1.0.1 or 1.0.3 works better in Kodi 16 and Sc 0.8.4 works better in 15.2

[manny786]

psycon,just sent you a pm with logs please help

[sultan14]

Hello dara i changed the ip address and downloaded stalker client nfps 103 but it keeps saying on the config page that its 084 and i keep getting authorization failed retrying i cleared most of the database on kodi the others i couldn't delete i am using kodi 15.2 what am i doing wrong the donation number is correct but still no luck could you please help me or anyone else i would be very thankful

[dara]

Hello dara i changed the ip address and downloaded stalker client nfps 103 but it keeps saying on the config page that its 084 and i keep getting authorization failed retrying i cleared most of the database on kodi the others i couldn't delete i am using kodi 15.2 what am i doing wrong the donation number is correct but still no luck could you please help me or anyone else i would be very thankful

There are issues with the authorization with all platforms, except maybe the MAGs.

[Tljljc]

Please help my epg stoped working after i set my gbox to zero cache. Im using stalker client nfps as my pvr. Excuse me but im new to kodi and trying to learn. Thanks alot!

[sultan14]

thank you dara will it take time till they fix it dara

[SSHAKER]

There are issues with the authorization with all platforms, except maybe the MAGs.

I'm having the same issues as sultan14 where the Stalker Client NFPS won't show the upgrade from 0.8.4 to 1.0.3 and I keep getting "Authorization Failed. Retrying". Do we wait it out or is there something else we can try? Thanks!

[vicrattlehea]

hey I am using stalker client think it's 0.8.3 everything is working fine with the security update. I am getting the channels and guide but for some reason I have no info any ideas? could it be because you can only set Connection Timeout to 15? oh I am using android box kodi 15.1 I think

[vicrattlehea]

ohh just read that the epg is down sorry

[Nickybhoy]

kodi.16.RC2.nfps.DLL.ERROR.FIX.arm.apk 28-Jan-2016 04:22 61472453
kodi.16.RC2.nfps.DLL.ERROR.FIX.i686.apk 01-Feb-2016 00:48 63450249
pvr.stalker.nfps-android-arm-i.zip 31-Jan-2016 22:09 386916
pvr.stalker.nfps-android-arm-j.zip 31-Jan-2016 22:09 465759
pvr.stalker.nfps-android-i686-i.zip 31-Jan-2016 22:09 444579
pvr.stalker.nfps-android-i686-j.zip 31-Jan-2016 22:10 523996
pvr.stalker.nfps-osx64-unknown-i.zip 31-Jan-2016 22:09 211792
pvr.stalker.nfps-osx64-unknown-j.zip 31-Jan-2016 22:10 290627
pvr.stalker.nfps-pi-arm-i.zip 31-Jan-2016 22:10 247613
pvr.stalker.nfps-pi-arm-j.zip 31-Jan-2016 22:10 326517
pvr.stalker.nfps-win32-i.zip 31-Jan-2016 22:10 134485
pvr.stalker.nfps-win32-j.zip



Hi Psycon - is the osx64 version ok to install onto an ubuntu x64 machine?

[geman220]

I keep getting authorization failed. I've setup everything exactly the way it says in the tutorial and I've reset my IPTV just to be 100% sure. Does Stalker Client NFPS no longer work with the changes to security they have made?

[Gtest413]

Loading channel from clients taking a long time. Anyone else?

*update:
Failed to load channels.

[razus69]

For Kodi 15 the pvr client is still in 0.8.4 not 1.03.
Is that normal ? Do you recommend to upgrade kodi to version 16 ?

[generica]

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.r.

[Marley]

i got that and redid my mac address and all was fine

[Stavman]

Is this still valid? It was working the other day and now all I get is "authorization failed". I changed my mac and reset iptv. Anything I'm missing?
Running kodi 16 rc2 on an android box . Thank you.

[tonyuk19]

Hi, Im a newbie here, so sorry if there is a post somewhere here.

Channels load up, guide loads up, but when i tap a channel i get no playback, just the waiting, then a time out, any ideas please

[sipde]

It's working with my Fire TV and the newest Kodi Jarvis, everything loads and plays-but still no guide. I know they had issues with it but is it back now? I just want to make sure my settings are right.

[tonyuk19]

It's working with my Fire TV and the newest Kodi Jarvis, everything loads and plays-but still no guide. I know they had issues with it but is it back now? I just want to make sure my settings are right.

So i have the opposite to you ha ha, we should join them up

[sipde]

Ha! Maybe we should! Do you have your timeout set for 15? I'm not sure that will fix your issue, but it seems to be important. I hope you get it working soon.

[tonyuk19]

nope, changed it from 120 to 15, still the same unfortunately

[mattvandoes]

My EPG is off by 1 hour exactly, how do i fix this?

[ilan]

Which option did you use: XMLTV Only, Prefer XMLTV or Provider? The last 2 are often off by an hour. XMLTV Only is usually spot on.

[manny786]

All back after 3 days:) Just redid my mac and reset the iptv, Followed psycon instructions EXACTLY and got the tv back.

[psycon]

to fix the server epg showing an hour off - change the timezone on your device to the next one over then update your time manually and reboot your device.

[sjordash]

to fix the server epg showing an hour off - change the timezone on your device to the next one over then update your time manually and reboot your device.

wow did this and now getting Stalker Client unable to load channels and cant get papiao to change MAC address again like last night!!!! I say in my last post was going to leave it alone - should have listened to myself.

[mattvandoes]

to fix the server epg showing an hour off - change the timezone on your device to the next one over then update your time manually and reboot your device.

This 100% does not work at all. The only way to fix the EPG from being 1 hour off is to manually change the time on your system to an hour ahead of what the actual time is. If you manually change the time zone then it will just change the time. I am on a Nvidia Shield so, the only way to fix the issue is to change the time manually to it being an hour ahead. Not sure about windows though? Is there a way to change the time in the actual settings in the PVR Stalker client? I noticed the time zone box says "Europe/Kiev".....anyone try something else to make it work?

[Blackbear199]

This 100% does not work at all. The only way to fix the EPG from being 1 hour off is to manually change the time on your system to an hour ahead of what the actual time is. If you manually change the time zone then it will just change the time. I am on a Nvidia Shield so, the only way to fix the issue is to change the time manually to it being an hour ahead. Not sure about windows though? Is there a way to change the time in the actual settings in the PVR Stalker client? I noticed the time zone box says "Europe/Kiev".....anyone try something else to make it work?
the timezone is not used,you can set it to any timezone you want.the pc or bhox time is used.the ********** guide is dwon becuause nfps has disabled authorization for the guide data.there are some issues that need to be fixed.
your are getting the guide data from nfps and not epg ninja which does have issues with it being off by 1 hr and only nfps can fix that.
the easy way to tell is if your guide is all grey its provider epg(nfps),if its colored its ********** guide.
even though you have ********** selected for guide if it fails to download it will default back to provider epg(nfps).

[ruthless]

can't get to Papiao. Is that expected?

[bkmo]

I lost iks66.tv for a bit too, and now it is back

[smittyj77]

Whats the difference between the arm-I and the arm-j version of stalker client? I want to make sure I load the correct one.

Index of /clairvoyance/pvr.stalker.nfps/1.0.3/

--------------------------------------------------------------------------------
../
kodi.16.RC2.nfps.DLL.ERROR.FIX.arm.apk 28-Jan-2016 04:22 61472453
kodi.16.RC2.nfps.DLL.ERROR.FIX.i686.apk 01-Feb-2016 00:48 63450249
pvr.stalker.nfps-android-arm-i.zip 31-Jan-2016 22:09 386916
pvr.stalker.nfps-android-arm-j.zip 31-Jan-2016 22:09 465759
pvr.stalker.nfps-android-i686-i.zip 31-Jan-2016 22:09 444579
pvr.stalker.nfps-android-i686-j.zip 31-Jan-2016 22:10 523996
pvr.stalker.nfps-osx64-unknown-i.zip 31-Jan-2016 22:09 211792
pvr.stalker.nfps-osx64-unknown-j.zip 31-Jan-2016 22:10 290627
pvr.stalker.nfps-pi-arm-i.zip 31-Jan-2016 22:10 247613
pvr.stalker.nfps-pi-arm-j.zip 31-Jan-2016 22:10 326517
pvr.stalker.nfps-win32-i.zip 31-Jan-2016 22:10 134485
pvr.stalker.nfps-win32-j.zip 31-Jan-2016 22:10 213295

[psycon]

I sengard J arvis

[smittyj77]

I sengard J arvis

Wow duh lol Thanks psycon :)

[wacoachrusso]

i have a nvidia shield...running isengard....which file should i download??

I also have a g box q...which file for that?

thanks

[Marley]

look at post 60 or 59

[wacoachrusso]

I seen that....tghere's and "ARM" and "i686" they're both android???????? which one do I dl??

[markawright2]

I noticed today on Papiao that the ability to change or reset the mac is now missing...any ideas?

[manny786]

can't get pvr client naps 1.0.3 , when ever downloaded it gives me 0.8.4

[radmacks]

i'm currently down on all my NFPS stalker PVRs. tried changing macs and reset still no go. Thinking server issues.

[wacoachrusso]

I am hoping you are right....this is driving me insane...i was using the stalker client...the one in the kodi build...was working fine this morning...now nothing!!! It loads up, but when i click on a channel...it just times out after like ten seconds

[psycon]

pm me your ip waccoachrusso

[mrbarnes48]

Newbie:
Android TV Box Ugoos UT1

What am I doing wrong: Kodi 16 Jarvis " New Install", DL pvr.stalker.nfps 1.0.3 the "j" "arm" from Ninja, Installed, In Pvr. stalker Configured Mac, Donation number, 72 Hours, choose IPTVROCKET, enabled
Went to Rocket site, verified Mac, reset IPTV, Kodi settings and enabled TV, Restart Kodi
Keep get error:
No PVR addon enabled
The PVR manager has been enabled without any enabled PVR Addon
Looks like it keeps disabling the pvr.stalker.nfps
Help

[PlayboyJ]

Thank you psycon for the tutorial. IPTV is working again on my fire stick.

[razus69]

Hi folks, I managed to get it working on a rapsberry pi 2 (isengard) with the only available version 0.8.4
Configure the pvr stalker (let it enabled), let tv setting on off in Kodi.
Than reset your nfps papaio :https://papiao.is/main/search_nfps and at nearly the same moment change kodi tv setting to ON.
Reboot and this worked for me.

[psycon]

Closing this thread.

If you if you have an issue with pvr.stalker.nfps or cannot connect at all Look through the posts or start a thread in Here: http://iptvtalk.net/forumdisplay.php?87-PVR-Clients-(Stalker-Client-IPTV-PVR-Simple)

IF you can connect fine, but your epg isnt working correctly or shows up grey and missing quite a few channels. Look through the posts or start a new thread in http://iptvtalk.net/forumdisplay.php?97-EPG-(epg-ninja)

Remember too. the site has a search function up in the top right corner, USE IT. your issue has probably been asked and solved numerous times.