A question i need answered...

[djsolospins]

So I'm planning on getting a donation . However I'd like to know if I can use one donation on multiple devices in my home . Also . I travel will that be an issue ...?

[Hank Venture]

One donation per device. Will be ok with travel as long as donation is not being used elsewhere, i.e. Home while your away.

[matrixebiz]

So I'm planning on getting a donation . However I'd like to know if I can use one donation on multiple devices in my home . Also . I travel will that be an issue ...?

One donation can be used on multiple devices but the other devices need be setup with the exact same information and you can only use One device at a time.

[big dady]

One donation can be used on multiple devices but the other devices need be setup with the exact same information and you can only use One device at a time.

And that's why people are crying about problems and blaming the server

[Marley]

yep like he said

[matrixebiz]

Yeah, true but it is possible. I was just answering truthfully but please delete my post if you think this will cause more harm to the service.

[djsolospins]

Yeah, true but it is possible. I was just answering truthfully but please delete my post if you think this will cause more harm to the service.

Thanks for the input guys . This answer my question. Have a great day !!!

[matrixebiz]

Thanks for the input guys . This answer my question. Have a great day !!!
No Problem, that's all I was trying to do :)

[djsolospins]

No Problem, that's all I was trying to do :)

One more thing.. I got my donation. .
Need a tutorial on how to set up. . Please.

[matrixebiz]

http://iptvtalk.net/showthread.php?6570-Setting-up-PVR-Stalker-(Kodi-Built-in)

Quick instructions below;


*Note: before starting, re-link your MAC at your donation site to clear any previous saved server settings)

1) To configure in Kodi, from the Main Page, Select System > Add-ons > My add-ons > PVR clients

2) Look for Stalker Client, and Click to bring up Add-on information, click on Configure and select General

3) Connection Timeout set to 15 - (We will use Portal 1)

4) MAC Address, enter your MAC that has been linked to your donation. Your linked mac is 00:1A:78:xx:xx:xx , where the x's are Hex digits (0-9, A-F). The colons are required, and there is no letter 'oh'

5) Server Address, enter the IPTV Server that was assigned to your donation

NFPS - http://11.iptvprivateserver.tv
Rocket - http://11.iptvrocket.tv
IPTV66 - http://66.iptv66.tv

6) Time Zone - (EG: I'm in Toronto so I use America/Toronto) - https://en.wikipedia.org/wiki/List_of_tz_database_time_zones

7) Auth Credentials - Username and Password is your Donation number (Needed for Feb 1st change)

8) Guide - select one of the following : Prefer XMLTV, XMLTV only, Prefer Provider, Provider Only

Select Remote URL and enter one of the following (filling in your mac and donation number of course)

nfps or rocket : https://papaio.tv/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxx/fname/<guide>
iptv66: https://iks66.tv/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxxx/fname/<guide>

Replace "<guide>" with the following (EG: .....xxxxx/fname/NFPSF4)
NFPSF1 - English (Low memory Devices)
NFPSF2 - English, non DST (Low memory devices)
NFPSF3 - Full (Colorful Guide and all channel info)
NFPSF4 - Full, non DST (Colorful Guide and all channel info)

9) Advanced - Use Alphanumeric combos for Serial Number (12-13 characters) , Device IDs (5-6 characters) and Signature (5-6 characters)

10) Token is not currently required.

11) Click OK to save your settings. Click on Enable to enable the client.

12) Navigate back to the Kodi Main Window, select System > Live TV > General

13) Select Enable, might get a 'Load of channels' error, Disable/Enable again, leave it for a minute then it should start loading/download the guide

[djsolospins]

I have it setup .. now all I get is autherization Failed. Also is this setup for the ********** . Or the pre-installed client .

[matrixebiz]

Follow the instructions I just did in the previous post but before you do, you will need to go back to your donation site, delete your MAC and re-add your MAC to clear the settings.

The instructions are for the built in Kodi stalker client as there is a change coming Feb 1st and there isn't an update for Stalker Client NFPS yet to incorporate the change

[djsolospins]

With a new number or same number. . Question is other people are using a different client. The Nfps client . I must be an idiot or something.

[matrixebiz]

With a new number or same number. . Question is other people are using a different client. The Nfps client . I must be an idiot or something.

You can use your same valid MAC. I think most are using the Stalker client NFPS because most of the options are not changeable to make it easier for users to setup but this will not work come Feb 1st. The built-in client (long setup) will also help your MAC from getting hijacked.

[djsolospins]

Again. Would it be easier to try the ********** client. . This looks super confusing

[matrixebiz]

Again. Would it be easier to try the ********** client. . This looks super confusing
It is easier but with the Feb 1st change they will be needing to release an update then you will probably need to put in all these settings anyway.

"You can use your same valid MAC. I think most are using the Stalker client NFPS because most of the options are not changeable to make it easier for users to setup but this will not work come Feb 1st. The built-in client (long setup) will also help your MAC from getting hijacked."

[djsolospins]

I see.. any chance u may have a link for a video. . ?

[matrixebiz]

No, sorry but it is pretty easy if you just go step by step (The instructions I posted are for Kodi 15.2+)

[djsolospins]

Lol ... all I get is unable to load channels

[matrixebiz]

Lol ... all I get is unable to load channels
That's Ok, so what I would do now is (if you have disabled the re-enabled the TV option twice);
1) disable the pvr Stalker client then disable TV
2) clear cache/data
3) delete and re-link your MAC at your donation site
4) launch kodi enable the pvr Stalker Client again (Double checking all your settings first by selecting Configure)
5) enable TV, disable TV, enable TV

[djsolospins]

Gonna try this ..

[djsolospins]

Omg.... !!!! I didn't spell the server name correctly .. hahaha other then that it's very simple .. g2g !!!!!!!

[djsolospins]

Wait I'm lying .. failed to get stream url...

[matrixebiz]

Wait I'm lying .. failed to get stream url...

I get that sometimes, have you tried a few other channels?

[djsolospins]

Yes the only channels that are working are the music videos .. and some international.

[matrixebiz]

Try exit Kodi, give it a few minutes and try again. Before you go into any channels let it load all the way first. You'll see the progress at the top of the Kodi main screen.

[djsolospins]

Ok .. gonna try that

[djsolospins]

Not working still .. is there something going on that I don't know about
..???

[matrixebiz]

Not sure, I'm not at home, sorry. maybe someone else will respond.

[djsolospins]

Ouch. .. thanks for all the help .

[djsolospins]

Is there anyone that can help please. . My last thread was closed.
All I get is url failure channel can't load .

[ilan]

Your thread was closed because you posted multiple threads and haven't been specific in terms of your situation. It's impossible to help unless we know the particulars.

What device are you using? If you're using Kodi, what version? What are you using to connect along with its version number (i.e., pvr stalker, pvr stalker nfps, iptv stalker)?

[djsolospins]

No worries I'm not upset or anything .
I have an mxq box with 15.2 installed.
I'm using the Stalker client that's on 15.2. Not the ********** version .
Due to the changes that will be implemented on the 1st.
Did the setup and now I get failed due to url error. . However my music channels are working. That's about it

[matrixebiz]

I'm home now.
Does channel 5* (5 star) work? Still working for me so not sure what else could be the problem unless you enabled the Stalker client last time before you re-linked your MAC

[djsolospins]

Oh hi.. umm . 5star.. isn't work same error. . Failed to get url stream

[ilan]

Have you fully configured pvr stalker? That is, serial number, Device ID 1 & 2 and signature?

Initially, I would suggest changing your MAC to see what happens.

1. Disable the pvr stalker client.

2. Go to the Papiao site relevant to your donation and change the MAC.

3. Change the MAC in your pvr stalker client's configuration.

4. Re-enable your pvr stalker client.

[djsolospins]

Honestly I did not do device Id2.. should that matter. ..?

[ilan]

Yes, if you only do a partial configuration, it can matter. Add Device ID 2, making sure it is different than Device ID 1. You should start with a fresh MAC when you add the new Device ID 2.

[matrixebiz]

Honestly I did not do device Id2.. should that matter. ..?

Yes, please do all the steps in the Instructions. I can't help you if you don't follow the instructions :)

[djsolospins]

Ok .. I changed my mac.
Redid the configuration for device one and 2 ...
Clear cashe and everything else.
Still same url error . Damn
Trying to be optimistic here

[matrixebiz]

Not sure if it matters but I do have a 13 character Serial, 6 character Device ID 1&2 and 6 character Sig - Alphanumeric sequence. Do you?

[ilan]

Ok, I'm going to try a shortcut. I don't know how you've setup your credentials, so let's try to follow a proven format.

Try mimicking this format in terms of the placement of numbers and letters. Of course, change the numbers and letters, but follow the sequence. Make sure IPTV Stalker and any PVR's are disabled. Start with a fresh MAC as before.

Serial: 1760631B40872
ID 1: 8345C
ID 2: 4903B
Sig: yuck1357

[djsolospins]

Yes sir. .. alphanumerical sequence. No caps but that should not matter. Gonna try tethering from my phone to see what happens ..

[djsolospins]

No difference with tethering. . This isn't good. .

[ilan]

Did you try the exact format I suggested with a fresh MAC?

[djsolospins]

Gonna try that format

[djsolospins]

Wahoo !!!! She workie.... !!!!!

[ilan]

Glad to hear. Enjoy your TV!

[djsolospins]

Thanks brother. !!! You da man

[matrixebiz]

Glad it work out for you

[djsolospins]

Thanks one question time zone and in numbers. . Is that right. +332654-1120424 that's mine under wikipedia. Does that looks right ..

[ilan]

Are you talking about what to put in the epg area? If so, use the english identifiers verbatim, e.g., America/New_York

[djsolospins]

Yes I just put America/my state.
One thing my guide isn't working .
What should the the epg setting be on ...?
Xmltv. ?? There's a few

[DarkSide]

Yes I just put America/my state.
One thing my guide isn't working .
What should the the epg setting be on ...?
Xmltv. ?? There's a few

read post 1

http://iptvtalk.net/showthread.php?7332-EPG-NINJA-by-The-Clairvoyants

[djsolospins]

Thanks guys

[ilan]

The time zones are standardized. Each state is not a unique time zone. Here is a list of time zones...


https://en.wikipedia.org/wiki/List_of_tz_database_time_zones

Which setting? I would select prefer xmltv. Does this pvr ask for an epg url? If so, here is the format...

hxxps://papiao.is/main/EPG/mac/00:1A:78:XX:XX:XX/donation/XXXXXXXXX/fname/NFPSF1

Replace the X's with your fleshed out MAC and your donation number.

The last item NFPSF1 will get you a guide with program names but no description. NFPSF3 will get you a guide with program names and program descriptions.

[djsolospins]

Cool .. this helps. .

[edwardnizz]

I never had to mess with the time zone,,works fine, and im in ny. the most common reasons is a cap where a lowercase should be or a mistype. matrixebiz instructions should work great. typing in urls with that mxq remote could be cumbersome so always double and triple check

[matrixebiz]

FYI - Just a quick comment on those MX android boxes, you can plug in a USB keyboard and mouse if you have one, to set it up a lot easier than than using the remote :)