Iks66

[dotsadie]

Can IKS66.tv be set up in (STALKER CLIENT) which comes with the 15.2 file or do i have to download an IPTV STALKER to configure my donation # an Mac Address.
I have been trying for days to get it to work with no success by using Stalker Client. If i do need to set it up with IPTV STALKER where do i get the file?
Thanks Dot

[Soundwav]

The default client in kodi works just fine for me.
So yes it will work

Im sure you have followed the guides here correct??

[eureka]

Can IKS66.tv be set up in (STALKER CLIENT) which comes with the 15.2 file or do i have to download an IPTV STALKER to configure my donation # an Mac Address.
I have been trying for days to get it to work with no success by using Stalker Client. If i do need to set it up with IPTV STALKER where do i get the file?
Thanks Dot
Yes Dot it can.

Here's a copy/paste of a post I made yesterday in reply to another user:

You won't find the IPTV Stalker Video Addon on your My Addons List until you actually install the IPTV Stalker Video Addon from a zip file.

You'll find the download link to install version 1.0.18 in this post: http://iptvtalk.net/showthread.php?6...ll=1#post54761 (javascript:void(0))

Alternatively, you'll find the download link to install a modified version 9.0.21 in this post: http://iptvtalk.net/showthread.php?7...ll=1#post58051 (javascript:void(0))

Note that neither of the above Video Addons have an EPG, so unless you intend using the likes of iVue for a tv guide that would use the IPTV Stalker Video Addon to access the Stalker Channels you'd be better off using the PVR Stalker Client in conjunction with the built-in Kodi Live TV feature, which comes with an EPG & channel list. You're running Kodi v15.2, so version 0.8.4 is already installed (you'll find it in My Addons>PVR Clients>Stalker Client) so hopefully you should have little or no problems setting it up. If you were to decide to use that combo feature you'd have no need to install the IPTV Stalker Video Addon at all.

You'll find instructions on how to configure it here: http://iptvtalk.net/showthread.php?6...ll=1#post51881 (javascript:void(0))

Alternatively, you could install the modified PVR Stalker NFPS from a zip file & you'll find that zip file download link here: http://iptvtalk.net/showthread.php?7...ll=1#post56678 (http://iptvtalk.net/showthread.php?7161-Stalker-Client-NFPS&p=56678&viewfull=1#post56678)

Comparison details on all of the above can be found here: http://iptvtalk.net/showthread.php?1...3694#post83694 (http://iptvtalk.net/showthread.php?10406-FAQ-Which-Kodi-Add-ons-do-I-need-for-NFPS-Rocket-and-66-IPTV&p=83694#post83694) which will help you decide which option is best for you.

----------
My advice to you is to concentrate on setting up the modified PVR Stalker NFPS (you'll have to install it from a zip file) which works in conjunction with the Kodi built-in Live TV feature. If you have the IPTV Stalker Video Addon installed, reset the settings to default & disable it. Do the same for the built in PVR Stalker Client. Disable Live TV & clear data, as well as clearing Guide Data. Shut down & relauch Kodi. Then link a fresh MAC addresss to your donation & follow the set up instructions for the modified PVR Stalker NFPS as linked to above.

[dotsadie]

I have downloaded the iptv stalker 1.0.18 an have the channels but can not figure, on this set up how to get the guide. In URL i have (http://mw1.iptv66.tv)

[crazed 9.6]

I have downloaded the iptv stalker 1.0.18 an have the channels but can not figure, on this set up how to get the guide. In URL i have (http://mw1.iptv66.tv)

the guide would come with the modified version of the 1.0.18
the iVue version.

eureka has the link for the 9.0.21 in his post above :)
http://iptvtalk.net/showthread.php?7379-Modified-IPTV-Stalker-%289-0-21%29-iVue-compatible-send-serial-number-enabled

[dotsadie]

So if i am reading Dara right all i need to do is to install IPTV STALKER 1.0.18 and just add NAME<>the url<>my Mac<>my made up Custom Serial<>device id<>device id2<>Signature<> an click ok and this is going to give me channels with the guide. Nothing else has to be done with the other IPTV STALKER in (MY ADDONS)

[eureka]

So if i am reading Dara right all i need to do is to install IPTV STALKER 1.0.18 and just add NAME<>the url<>my Mac<>my made up Custom Serial<>device id<>device id2<>Signature<> an click ok and this is going to give me channels with the guide. Nothing else has to be done with the other IPTV STALKER in (MY ADDONS)
If you install IPTV Stalker Video Addon v1.0.18 it won't give you channels with a guide. It will merely give you access to a list of channels like other video addons.

If you install the modified version of v1.0.18 (v9.0.21) you will get the exact same, but you can use that version with iVue Guide, which is a third party addon which provides a guide which can be integrated with the IPTV Stalker Video Addon resulting in you being able to access IPTV Stalker Video Addon via the iVue Guide.

Unless you have a particular reason to use the iVue guide you're really creating more work for yourself & again I'd advise you to use the modified PVR Stalker NFPS (you'll have to install it from a zip file) which works in conjunction with the Kodi built-in Live TV feature. Configuration is minimal & all you have to do then is basically enable Live TV.

[dotsadie]

where do i get ths file from and is there a video to follow?
Thanks DOT

[eureka]

where do i get ths file from and is there a video to follow?
Thanks DOT
Follow the link that I posted in post #3 for the modified PVR Stalker NFPS, go to the end of the post & download the zip file.

You really don't need a video as it's quite straightforward to configure. Should you run into any problems post details in that thread for help. One thing I would advise is to uninstall the IPTV Stalker Video Addon v1.0.18 & then link a new MAC address to your donation before before you proceed.

[dotsadie]

so i have downloaded the plugin.video.stalker 9.0.21 this is the file you are referring to. Then i put my MAC ADD in<>serial#<>id#<>id#2<>and sig# Then click ok an this will give me channels and EPG correct?

[eureka]

No, I was referring to the Modified PVR Stalker Client NFPS

[dotsadie]

Can you PM with the file an instruction eurka?
Thank you Dot

[tuxen]

Hi dot! :) like eureka also advised.
I think you be much better of using this for a start: http://iptvtalk.net/showthread.php?7161-Stalker-Client-NFPS
its dead easy to setup, uses the pvr functionality of kodi unlike iptvstalker and has an awesome epg from the get go also integrated in kodi unlike ivue.

you probably need to change mac first because of the serial info.. but it will give you a much better idea what to expect from real pvr, and how to move on if you want to. I know many that just uses this, including me on my main box.

the config can not go wrong just choose provider, enter the last 6 digits of your mac your donation number if you want the advanced epg, and you are up and running with proper pvr integration in kodi.

[dotsadie]

I am getting what is the picture unknown error has occured can not load Dll

[tuxen]

crap.. you are running lollipop? :/

[dotsadie]

whats that mean?

[tuxen]

ok you have to use the build in one.. unless you follow some of the work around might be more trouble than worth depending on how good you are at copying files around and setting permissions.

i'll write you some simle instructions for the building stalker pvr addon.. hold on.

[tuxen]

ok if you have not setup serial numbers and stuff an easy way to do it is think of pin codes, come up with 4 pins x 4 digits.
you can then use one of them 3 times for serial plus a random number/letter and the 3 others for dev id's and signature.

I found a updated guide, eureka probably posted it to but go here: http://iptvtalk.net/showthread.php?9506-For-all-those-running-Kodi-and-Stalker-Client
it will as hank says fail the very first time, just disable and enable the addon/tv function or restart kodi.

after that you will have to setup the advanced epg (if you want it) according to this: http://iptvtalk.net/showthread.php?7332-EPG-NINJA-by-The-Clairvoyants

if you have trouble post it here.

[dotsadie]

it comes up saying stalker client unable to load channels.
Any ideas tuxen

[tuxen]

it does that the very first time as said.. you should be able to just restart kodi or disable and enable the stalker addon and it will load.. do not touch the settings. and its only the very first time dont worry. also did you change mac before setting it up as per the guide?

otherwise to get going from fresh just the change mac on the provider page and in stalker pvr addon (just leave the serial info) it will fail the first time again, then restart kodi or re-enable the addon and it will load.

[tuxen]

whats that mean?
its the android version.. they name them after sweets and cookies. heh
previous version is named KitKat and it run on that.. anything higher needs a workaround that is generally not easy if you do not know about using a adb shell in android. :/

[dotsadie]

It still keeps coming up stalker unable to load. The provider gave me (server address (http://mw1.iptv66.tv) could this be the problem? .

[dotsadie]

I want to thank every body for the help.I am not to sure what the problem is but it does work perfect using IPTV STALKER the only thing is no EPG.
Thanks again Dot

[tuxen]

It still keeps coming up stalker unable to load. The provider gave me (server address (http://mw1.iptv66.tv) could this be the problem? .
wait a minute.
yes that is the problem that url is only for iptv stalker.. the real portal url is 66.iptv66.tv and it should finally work. :)

[tuxen]

sigh so close lol..

[dotsadie]

Tried what you suggested on both my PC and Android, still didn't work.It will fine on iptv stalker1.0.18 but no guide. I am thinking a reseller that is why it wont work giving me the guide.
Thanks again for all the help tuxen and eurka. Dot