Back to R10 after testing R12

[freetv4life]

Had to revert to R10 after about 2 - 3 weeks of testing R12 firmware. Found it very slow / sluggish when changing or loading channels. Almost drove me crazy.

Downgrade was easy just followed the instructions on FTAZETA see link below. Didn't have to do a factory reset and after the downgrade all my server input was still there. Much happier on R10. Missed it.


http://ftazeta.com/mag-254-firmware/66536-mag-254-firmware-download-other-versions-instructions.html

We need to have a section like this in the file section as a sticky.

[K00lKatT]

personally didn't find that to be the case with r12 at all...:)

[tornado.iptv]

Have you tried to restore the firmware to the factory default?

[tornado.iptv]

Try this procedure
And after reset be ready with the image of r10 firmware.
Mag 254 Bios
1 unplug Mag254
2 push and hold the button with 3 dots and 3 lines and plug power back in you should have a blue screen with settings.
3 Check and change your setting save and reboot

Things you may need to change
1 Video settings should be set to your TV settings
2 You should be booting from nand or nand 2 which ever that works for you.
3 Factory Reset

[tallman]

it load much faster for me r12 that is.

[crazy carl]

My cousin has never had problems with the R12 file thus far anyways.. Perhaps it was a bad firmware update when you had performed it originally

[busydude305]

My mag just freezes and stops playing after like a minute or so. How to fix this ?

Sorry for caps lol